Journal of the Korean Society of Fashion and Beauty
/
v.4
no.3
s.9
/
pp.40-44
/
2006
This study is on the brassiere of reduce clothing pressure. To set the measurements of bras for women in their 20s, considering the comfortableness in wearing and tightness, this paper conducted a questionnaire survey concerning breasts and bras as well as measurements of body and contact surface pressure. As a result of comparing the discrepancies between the lower chest circumferences of the body and the bra, it was revealed that 67.0% were wearing one that was bigger than the body size. Most of them mentioned 'feeling of tightness' as a reason(60.4%), which suggests there are problems of the total length and elasticity in the process of making bras. The favorite bra types are wire type(57.9%), mold type(24.3%), and strapless type(10.4%).it is recommended that the total length of lower chest circumference be increased. The result and the recommendations of this study are as follows: First, the total length of brassiere be increased by 5cm from the current patterns in the process of manufacturing. Second, elasticity of the lower-side tapes be extended from 120% to 170%.
We studied on the development of clothing pressure measurement system for wear comfort of foundations(girdle, brassiere, all-in-one). Measurements of clothing pressure were made on subjects wearing girdles, brassieres, all-in-ones of several type(material, size) using by CPMS(clothing pressure measurement system: Tech-Storm. Co). Wearing experiments have been carried out using nine women in the twenties and six women in the forties. The results obtained are as follows: 1. The clothing pressure applied by girdle was higher in the hard type than the soft type by $5-10gf/cm^2$, also recorded a high clothing pressure at points of waist band line and thigh lateral. 2. Clothing pressure of brassiere with wire was high at the point of underbust line and shoulder strap. Pressure for 40s showed higher than 20s by $6-7gf/cm^2$. 3. The pressures of abdominal part applied by both of girdle and all-in-one were much greater than those of girdle or all-in-one. 4. We demonstrated the adaptability and conformity of the CPMS by inquiring into the clothing pressure of various foundations.
The purpose of this study is to develop the applied brassiere pattern of women which are fitting for 75A. The constructing of this experimental brassiere were lower cup, upper cup, front panel and U-wing as well as a full cup embcing the entire breasts. Basing on the bra model from domestic experiment results, development of an applied design, round side type pattern, has been suggested. Thus, suggesting the round variation design bra, which is an applied design based on the basic model based on the breast volume. Based on the sizes that are in reference to Size Korea (2004) and related previous researches, the basic model that has been experimented with 11.4% polyurethane and 88.6% Nylon as the materials, has been selected as the model of research. This takes 75A, the size of which is set according to the underbust circumference and the breasts circumference, as the basic model. It is an application in terms of design, and there is no change to the cup volume or size because it has been moved only from the cutting line. The applied design changes the right side of the lower cup into an easily-movable form and attaches it to the upper cup, and the lower cup takes the right part of the upper cup to form a cup shape of round variation design. It also changes basic straight form of the wings, and alters them into U-shape.
This research attempts to analyze the physical characteristics of middle school girls and compare the product sizes and patterns of school uniform blouses by brand. And wearing tests were performed regarding the appearance of blouse by bland. The results are follows. The standard deviation for bust circumference and waist circumference of middle school girls measured in 2004 were showed extremely large difference among individuals compared to the previous results. While waist back length reached adult size by $2^{nd}$ grade high school, bishoulder length reached adult size by $2^{nd}$ grade middle school. And girls after $2^{nd}$ grade middle school had their depth and breadth of bust, underbust circumference and bust circumference growing proportionally. These results need to be reflected in producing a pattern drafting for middle schoolers. By comparing wearing test results on appearance, it was shown that in terms of ease of bust circumference, the expert group evaluated brand with less ease as not having adequate ease compared to brand, while the middle schooler group evaluated as having sufficient ease. The front silhouette also showed same results. This reflects the preference for appearance by the middle schooler group, which is a factor to be considered during pattern drafting of school uniform blouse.
Journal of the Korean Society of Clothing and Textiles
/
v.45
no.3
/
pp.495-509
/
2021
The study investigated the effects of five commercial body shaping foundation items on clothing pressure, blood flow, body shaping effectiveness, and wearer satisfaction for middle-aged women. The study measured clothing pressure at each of the 10 designated measurement points for twelve subjects wearing the foundations. Blood flow changes were recorded and body shaping effectiveness was analyzed by comparing differences in girth when wearing and not wearing the foundations. The subjects rated wearer comfort along a 7-point Likert scale. The results were that clothing pressure was present at all measurement points, and all foundations placed the least pressure on the anterior underbust girth. In addition, clothing pressure was high in the order of the lateral, posterior, and anterior areas. As clothing pressure increased, blood flow and velocity decreased and overall wearer satisfaction was assessed to be less comfortable. Body shaping effectiveness was evident across all the items, as all decreased girth measurements significantly. In conclusion, the appropriate level of clothing pressure provided by experimental foundations which is positive for blood flow and has an excellent body shaping effect was found to be between 0.53 and 1.77 kPa.
In this study, the fit of commercial sports bras was analyzed according to various design variations, focusing on the shape of the shoulder strap, which is known to cause great discomfort in wearing sports bras. Experimental clothes were set to four commercially available sports bras with different shoulder strap shapes. The results showed that, in "size suitability," the overall satisfaction with experimental clothing B, of which the shoulder strap can be adjusted, was the highest, especially for "underbust circ. fit," "bust circ. Fit," and "shoulder strap length." In the "Shape suitability" and "Wearability" sections, experimental clothing B also showed the highest satisfaction and the shoulder strap adjustment device did not negatively affect wearing satisfaction. In the question on "side wings rolled up," experimental clothing A also received a relatively good score, which is due to its long front length. In the "Compression of the front center" section, the responses for experimental clothing A and B were "appropriate" and for C and D, they were "pressurized." In "motion suitability" as well, satisfaction with experimental clothing B was the highest, followed by experimental clothes A, C, and D. In the "body shape correction" section, clothing B elicited the highest satisfaction, followed by experimental clothes A, C, and D, in that order. Overall, it is recommended that shoulder straps be applied with adjustable straps for the comfort of the shoulder area while wearing sports bras.
Journal of the Korean Society of Clothing and Textiles
/
v.47
no.1
/
pp.123-136
/
2023
To develop smart sportswear capable of measuring biometric data, we created a close-fitting pattern using two- and three-dimensional (2D and 3D, respectively) methods. After 3D virtual fitting, the tightness of each pattern was evaluated using image processing of contact points, mesh deviation, and cross-sectional shapes. In contact-point analysis, the 3D pattern showed high rates of contact with the body (84.6% and 93.1% for shirts and pants, respectively). Compared with the 2D pattern, the 3D pattern demonstrated closer contact at the lower chest, upper arm, and thigh regions, where electrocardiography and electromyography were primarily carried out. The overall average gap was also lower in the 3D pattern (5.27 and 4.66 mm in shirts and pants, respectively). In the underbust, waist, thigh circumference, and mid-thigh circumference, the cross-section distance between clothing and body was showed a statistically significant difference and evenly distributed in the 3D pattern, exhibiting more closeness. The tightness and fit of the 3D smart sportswear sensor pattern were successfully evaluated. We believe that this study is critical, as it facilitates the comparison of different patterns through visualization and digitization through 3D virtual fitting.
This study has analyzed body size of adult women between 20~59 years old in 2010 conducted by Size Korea and the study method is as follow. (1) Distribution ratio of bust circumference per age and distribution ratio of differences of bust drops were analyzed. (2) Analysis of one-way design of experiment was carried out for 20 items of body sizes according to differences of bust drops with regard to age groups of 20 and 40 years old in consideration of tourists who are unspecified target and for the whole ages groups. (3) Comparison analysis of 20 items of body sizes per bust circumference and according to level of differences of bust drops was carried out and (4) t-test of the two groups based on the standard of 12.5 cm of the differences of bust drops was conducted and was analyzed. Tthe differences of bust drops below 10 cm were reduced according to ages. 12.5 cm was the most in the group of ages of 20s and under 7.5 cm was reduced as ages were higher. Body items according to the differences of bust drops per ages had meaningful differences between groups except (acromion height-axilla height), height and shoulder length for the group of ages of 20s and in the whole ages groups, there was meaningful difference between groups in all items except height and shoulder length. Comparisons according to the differences of bust drops per section of 5 cm of bust circumference showed meaningful differences between groups in general in items of BMI, bust point-bust point, neck circumference, bust circumference, underbust circumference, neck point to bust point and weight. As the result of comparing the two groups of the differences of bust drops based on the standard of 12.5 cm, all had meaningful differences except stature and shoulder length.
This study intend to analyze differences between 3D body scanning sizes and direct measurement sizes of same subjects. The subjects of study are female students of university in China. 3D data analyze as a 3D Body Measurement Soft System. The conclusion found is as below: In case of circumferences, error between direct-measurement size and 3D body scanning size is from 4.9mm to 62.2mm. The neck circumference size of directmeasurement is bigger than 3D body scanning size. The height error range is from 0.6mm to 51mm. Height of underbust, waist and hip are that direct-measurement sizes are higher than 3D body scanning sizes. Gap of width is from 3.8mm to 21.9mm. The gap range is too narrow relatively to others. Only direct-measurement size of neck width is wider than 3D body scanning size. Error range of length is from 0.3mm to 41.8mm. 3D body scanning sizes of lateral neck to waistline, upperarm length, arm length, neck shoulder point to breast point, shoulder center point to breast point, lateral shoulder to breast point are longer than direct-measurement sizes. They have a negative margin of error. I intend to set up same measurement point between direct-measurement and 3D body scanning but they have some errors because direct-measurement point is applied by a person. 3D body scanning measurement point is settled by automatic system. A measurement point of direct-measurement and 3D body scanning isn't unite. So we need to make a standard of setting up measurement points.
The study was aimed to develop a torso-type dress form representing body features of the female fashion models in Korea. To fulfill this purpose, 5 female fashion models aged between 20 and 26 having the average body measurements of professional fashion models in Korea were selected and their 3-D whole body scanned data were analysed. The 3-D whole body scanning method enabled to generate a virtual female fashion model within the CAD system by measuring the subjects' body shapes and sizes. In addition, the virtual model's body data led the development of a standard female fashion model dress form for the efficient fashion show preparation. In order to manufacture the real dress form for female fashion models, 3-D printing technology was adopted. The consequent results are as follows: (1) the body measurements (unit: cm) of the developed dress form were: biacromion length, 36.0, bust point to bust point, 16.6, front/back interscye lengths, 32.0/33.0, neck point to breast point, 26.0, neck point to breast point to waist line, 41.5, waist front/back lengths, 34.5/38.5, waist to hip length, 24.0, bust circumference, 85.0, underbust circumference, 75.0, waist circumference, 65.0, hip circumference, 92.0. (2) the body measurements differences between the developed and existing dress forms were highlighted with the body measurements of neck point to breast point and waist to hip length. (3) the body shape features of the developed dress form showed that bust, shoulder blade, shoulder slope, abdomen and back waist line to hip line parts were more realistically manufactured.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.