• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1999년도 학회창립 10주년 기념 1999년도 가을 학술발표회 논문집
• /
• pp.143-146
• /
• 1999

This study is intended to investigate the properties of expansion of concrete under various curing environment with expansive additives. In construction field, expansive additives, which are anaiable to prevent from the diverse cracks caused by drying shrinkage are not expected to accomplish the expantion we expected because of both the absence of the know ledge change, loss of weight and dynamic of elasticty under various unit contents of expansive additives and curing condtion.

• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 2006년 제4회 한국유체공학학술대회 논문집
• /
• pp.249-252
• /
• 2006

We conducted the experiment to analyze characteristics of micro-nozzle using different cold gas under two different nozzle expansion ratios in low vacuum condition. We measured thrust and chamber pressure and mass flow rate under low vacuum condition, and then compared them with those in ambient pressure.

• 대한수학회논문집
• /
• 제28권3호
• /
• pp.615-633
• /
• 2013

We use a power series expansion method to get an analytic approximation value for the quanto option price under the Hull and White stochastic volatility model, which turns out to be accurate enough by comparing with the simulation prices using Monte Carlo method.

• 한국도로학회논문집
• /
• 제17권4호
• /
• pp.19-24
• /
• 2015

PURPOSES : The objective of this study is to evaluate the effect of the residual mortar of recycled concrete aggregate on the expansion behavior during alkali silica reaction (ASR). METHODS: In order to evaluate the net effect of residual mortar on ASR expansion behavior, two aggregate samples with the same original virgin aggregate source but different residual mortar volumes were used. ASTM C1260 test was used to evaluate the ASR expansion behavior of these two aggregates and the original virgin aggregate. RESULTS: The greater the amount of residual mortar in recycled concrete aggregates, the less is the induced ASR expansion. Depending on the amount of residual mortar in recycled concrete aggregate, the ASR expansion of recycled concrete aggregate may be less than half of that of the original virgin aggregate. CONCLUSIONS: The residual mortar of recycled concrete aggregate may lead to the under estimation of the ASR expansion behavior of the original virgin aggregate.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 추계학술대회
• /
• pp.1698-1703
• /
• 2004

To understand the high expansion effects by adopting intake closing time in the cases of compensating intake air-mass and effective compression ratio simultaneously, fundamental study was carried out by using RICEM realizing Atkinson cycle. Intake air-mass and effective compression ratio were compensated by increasing supercharged pressure and geometric compression ratio. The results showed that the increasing rates of expansion ratio and expansion-compression ratio were increased by compensating both a intake air-mass and effective compression ratio the same tendencies were obtained with the increases of compression ratio and cut off ratio It was also found that LIVC has more advantages in expansion ratio and effective work than those of EIVC under above conditions.

• 대한가정학회지
• /
• 제17권4호
• /
• pp.1-14
• /
• 1979

The functional problems of the basic pattern of clothing are a matter of the first importance to clothing construction. Therefore, the ergonomic analysis of the expansion and contraction of the upper body surface, due to motion, has become required. thus in order to obtain the measurements and rate of expansion and contraction of the upper body surface following from its motions, the development figure of " Shell" and somatometry were employed. The results obtained through the investigation can be summarized as follows : 1) According to the developmental figures of "Shell" the latitudes centering around the shoulder line present contractive tendencies by arm movement. The longitudes around the center back waist length are expansive tendencies when bent forward. In the case of a 15$^{\circ}$ lean backward posture, the longitudes around the center front waist length are expansive tendencies. 2) By somatometry, the region from the scapula to the axilla point the upper back with presents the greatest expansion (more than 30%). The region from scapla to arm presents the maximum rate of contraction. In considering the longitude , under the axilla waist length and the bust point waist length generally shows the greatest rate of expansion. 3) The bust point waist length and under the axilla waist length are of great importance to the basic pattern of clothing. and have expansive tendencies(6.3cm). Among the latitudes, the upper back width has the greatest tendency for expansion (7.83 cm). 4) The region which presents the greatest rate of the expansion and contraction is in the proximity of the arm. These results testify that the amount of room of the back width must be given consideration in constructing the basic pattern of clothing.pattern of clothing.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2002년도 International Meeting on Information Display
• /
• pp.1053-1055
• /
• 2002

Recently CRT is getting large-sized, Flatness and High Fine Pitched in the meantime the raw material for shadow mask is in rapid progress of thinness, Low Thermal Expansion and high strength.Until now we have used AK(Aluminum Killed) & Invar(Fe-Ni alloy) materials for main raw material of shadow mask component. However recently Nb and Co addition and Nb+Co addition, which has advantage of Low Thermal Expansion and High Strength. has been developed as well as applying in mass production as CRT's trend has become more flat and fine pitch. Among of them, Co addition has been mass production as forming type (Flat CRT) with the beneficial effect of low thermal expansion & high strength for the first time. Since then Nb+Co addition has been used in mass production by the request of much higher strength of shadow mask component. In case of Nb addition, It's thermal expansion coefficient is a little lower than normal Invar and a little higher than Co addition, meanwhile Its Mechanical property is almost similar to Co Addition. The used samples of this experiment are 36%Ni + Fe, 32%Ni + 5%Co + Fe, 32%Ni + 5%Co + 0.3%Nb + Fe, 32%Ni + 0.3%Nb + Fe with heat treatment temperature of 600$^{\circ}C$, 650$^{\circ}C$, 700$^{\circ}C$, 750$^{\circ}C$, 800$^{\circ}C$, 850$^{\circ}C$, 900$^{\circ}C$ respectively under the condition of 15min holding time. After heat treatment, we have observed the change of mechanical property with addition of small elements through mechanical property investigation and metal structure observation as well as transition of thermal expansion coefficient by measuring of thermal expansion coefficient at 850$^{\circ}C$. In conclusion, 5%Co addition indicates that its thermal expansion coefficient is very similar under the condition of at 850$^{\circ}C$ for 15min 's heat treatment. From the experimental result it is suggested that Co addition is mostly suitable for Doming property and Nb addition is mostly suitable for Drop property.

• 한국지반공학회논문집
• /
• 제38권9호
• /
• pp.53-67
• /
• 2022

마이크로파일은 소구경 현장타설말뚝으로, 시공방법이 간단하고 공사비용이 상대적으로 저렴하여 건축물을 비롯한 각종 구조물의 보수보강 및 증축 시 기초보강 등에 활용되고 있다. 시공이 용이하고 간단한 메커니즘의 구조체를 선단에 장착하여 지지력을 증대시키는 선단 확장형 마이크로파일이 개발되었으며, 이에 대한 수치해석, 내구성시험, 원심모형시험 등의 연구가 수행되어 왔다. 본 연구에서는, 기존에 수행된 수치모델링을 고도화하여 연직하중 재하에 의해 연결강봉 근입 시 고정 지압구가 활착되는 거동 메커니즘을 확인하고, 원심모형실험과 동일한 조건에서의 수치해석을 수행하여 그 결과를 비교하였다. 또한, Lab-scale 수치해석 결과를 바탕으로 고정 지압구의 형상 개선안을 도출하고, Field-scale 수치해석을 통해 일반 마이크로파일 대비 지지력 증대효과를 비교·검증하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1997년도 하계학술대회 논문집 D
• /
• pp.1083-1087
• /
• 1997

Every effort is now being exerted in industrialized and developing countries to reduce emission of greenhouse gases from electric power sector. In this paper, we provide supply-side resource mix strategies in the long-term generation expansion planning under the expected greenhouse gas regulations. Under the environmental regulations, we explore the least-cost generation expansion plan of Korea and determine the composition of future resource mixes. Our analysis is performed on the basis of the revised WASP package which can evaluate emission of carbon dioxide from each power plant. The evaluation process of carbon dioxide emissions, which can consider the efficiency and operating conditions of each generator simultaneously, has been incorporated into the probabilistic production cost simulation module of WASP.

• Structural Engineering and Mechanics
• /
• 제36권4호
• /
• pp.447-461
• /
• 2010

Fiber reinforced polymer (FRP) bars have been widely used as reinforcement for concrete structures. However, under elevated temperatures, the difference between the transverse coefficients of thermal expansion of FRP rebars and concrete may cause the splitting cracks of the concrete cover. As a result, the bonding of FRP-reinforced concrete may not sustain its function to transfer load between the FRP rebar and the surrounding concrete. The current study investigates the cracking resistance of FRP reinforced concrete against the thermal expansion based on a mechanical model that accounts for the tensile softening behavior of concrete. To evaluate the efficacy of the proposed model, the critical temperature increments at which the splitting failure of the concrete cover occurs and the internal crack radii estimated are compared with the results obtained from the previous studies. Simplified equations for estimating the critical temperature increments and the minimum concrete cover required to prevent concrete splitting failure for a designated temperature increment are also derived for design purpose.