• 한국항공우주학회지
• /
• 제48권11호
• /
• pp.849-859
• /
• 2020

반경험식과 상용 전산해석도구를 이용하여 비행 속도 및 챔버 압력에 따른 유도무기의 기저항력을 예측하였으며, 두 해석 결과는 대체적으로 일치함을 보였다. 노즐에 의한 분사 제트의 과대/과소 팽창에 따라 기저부의 유동 특성과 기저항력의 차이가 관찰되었다. 과대팽창 조건에서는 기저부 상단에 팽창파가 발생되면서 기저부의 압력이 감소하였으며, 외부 자유류의 마하수가 증가함에 따라 팽창파의 강도가 강해지면서 기저부 압력 더욱 감소하였다. 과소 팽창 조건에서는 노즐 후류의 영향으로 기저부 주위에 충격파가 발생하고 이로 인해 기저부 압력이 증가하였으며, 챔버의 압력이 증가할수록 그 영향이 크게 나타났다. 동일 챔버 압력 조건에서는 자유류 마하수가 증가함에 따라 기저부에서 생성되는 충격파가 하류로 이동하면서 기저 압력이 감소하는 특성이 관찰되었다.

• 한국연초학회지
• /
• 제19권1호
• /
• pp.70-75
• /
• 1997

The expansive properties of leaf tobacco by nitrogen gas was investigated with cut tobacco AB3O-1, CD3L-1(NC82). Major factors for the best expansion of the tobacco by the gas were an impregnated pressure and expansion temperature. The expansion rate for AB3O-1 and CD3L-1 at 250℃, 750kg/cm2 was 96.6%, 99.4% respectively. The shred size and fineness index at 96.6% of expansion rate for AB3O-1 was almost the same as at 58.3% for CD3L-1. The time reaching at equilibrium moisture under of RH 57% was 36hr in non-treated leaf tobacco, but it was 20hr in expanded tobacco. We confirmed that total sugar contents of leaf tobacco by the expansion was decreased with 9.3∼10.9%. Total alkaloid was decreased with 17.5∼21.1% and ether extracts was declined with 4.9∼9.3%. These results suggest that the expansion method of leaf tobacco by nitrogen gas is a useful method without any serious environmental troubles. Key words : expansion, nitrogen gas, heat treatment, tobacco.

• 콘크리트학회논문집
• /
• 제12권1호
• /
• pp.79-88
• /
• 2000

Usually, the expansive additives is used to prevent the occurrence of drying shrinkage in concrete. However it may sometimes be over-added in field due to the insufficient cognition of constructor's, which may cause the serious problems in concrete structures. In this study the experiments are performed to present the expansion properties of concrete by varying the water to binder ratios, unit contents of expansive additives and curing conditions. By the results, the strength showed an increase with the addition of expansion additives from 30kg/㎥ up to 50kg/㎥, and a great decrease by contraries if the larger amount are added. Also the more the expansion additives were used, the more length change occurred in concrete. In view of the curing conditions, the concrete by air cured appeared a little expansion even the unit expansion additives increased, which showed an opposite inclination of that with standard curing. This could be explained by the less occurrence of hydration in air condition which also lead to the little expansion of concrete. Hence the expansion concrete to be cured in water or moisture condition became an especial important thing. concrete using expansive additives showed that high expansion was taken place with the rise of temperature.

• 한국세라믹학회지
• /
• 제24권5호
• /
• pp.411-416
• /
• 1987

Thermal expansions and thermal expansion coefficients of cordierite ceramics reinforced by SiC whiskers up to 40 vol. % were investigated. The composite specimens were hot pressed at 1523K for 30 min under 28.5 MPa pressing pressure in Ar atmosphere. Thermal expansions of the hot pressed composites were measured using a differential dilatometer up to 1262 K in air. Thermal expansions and thermal expansion coefficient of the composites increased with SiC whisker content. Thermal expansion behaviors of the composites were well explained by modelling parallel slabs randomly distributed on the whisker plane as the microstructural element of the composites.

• 소성∙가공
• /
• 제16권7호
• /
• pp.521-529
• /
• 2007

This paper is concerned with the analysis on the surface expansion of AA 2024 and AA 1100 aluminum alloys in backward extrusion process. Due to heavy surface expansion appeared usually in the backward can extrusion process, the tribological conditions along the interface between the material and the punch land are very severe. In the present study, the surface expansion is analyzed especially under various process conditions. The main goal of this study is to investigate the influence of degree of reduction in height, geometries of punch nose, friction and hardening characteristics of different aluminum alloys on the material flow and thus on the surface expansion on the working material. Two different materials are selected for investigation as model materials and they are AA 2024 and AA 1100 aluminum alloys. The geometrical parameters employed in analysis include punch corner radius and punch nose angle. The geometry of punch follows basically the recommendation of ICFG and some variations of punch geometry are adopted to obtain quantitative information on the effect of geometrical parameters on material flow. Extensive simulation has been conducted by applying the rigid-plastic finite element method to the backward can extrusion process under different geometrical, material, and interface conditions. The simulation results are summarized in terms of surface expansion at different reduction in height, deformation patterns including pressure distributions along the interface between workpiece and punch, comparison of surface expansion between two model materials, geometrical and interfacial parametric effects on surface expansion, and load-stroke relationships.

• 에너지공학
• /
• 제21권4호
• /
• pp.411-418
• /
• 2012

본 연구에서는 가솔린 엔진 자동차의 엔진 폐열 회수를 위한 이중 회로 랭킨 사이클 시스템에서 용적형 팽창기의 설계 팽창비에 따른 성능 해석이 수행되었다. 자동차 엔진 폐열 이용 랭킨 사이클 시스템에 사용되는 용적형 팽창기는 운전 조건에 따라 설계 팽창비가 운전 압력비보다 낮은 저팽창 조건과 설계 팽창비가 운전 압력비보다 높은 과팽창 조건으로 운전되므로 탈설계 조건에서 성능 예측이 중요하다. 또한 용적형 팽창기는 자동차 적용시 팽창효율 뿐만 아니라 부피와 무게를 최소화하는 것이 매우 중요하므로 이를 고려한 설계 팽창비의 최적화가 요구된다. 본 연구에서는 용적형 팽창기의 탈설계 조건에서 성능 예측을 통해 팽창효율과 팽창기의 용적을 동시에 고려하여 설계 팽창비를 목표 운전 압력비보다 낮도록 하여 저팽창 운전을 하도록 설계 하는 것이 유리함을 제시하였다.

• 대한치과교정학회지
• /
• 제25권6호
• /
• pp.733-746
• /
• 1995

In narrow maxillary arch, midpalatal suture can be readily opened in growing children with maxillary palatal expansion. In adult patients, narrow maxilla is generally treated surgically because their growth are deemed completed due to their age. However, in patients under 25, midpalatal suture may not be closed. In addition, maxillary expansion may depend upon the closure of other maxillary sutures, which generally remain open at this stage. The present study attempted suture openings with palatal expansion on 5 female patients in their early 20's. The opening was successful in 4 patients, while only one patient showed no suture opening. In all 4 subjects, no discomfort or pain was present during s\expansion, and the successful suture opening was confirmed on occlusal x-rays. Therefore, for those patients with narrow maxilla in their early 20's, rapid palatal expansion or slow palatal expansion may offer a simple and less complicated option which, if successful, may preclude the need for surgery and thereby circumvent the psychological and financial burdens for the patients.

• Geomechanics and Engineering
• /
• 제25권4호
• /
• pp.283-294
• /
• 2021

This paper presents a rigorous solution for spherical cavity expansion in unsaturated soils under constant suction condition. The hydraulic behavior that describes the saturation-suction relationship is modeled by a void ratio-dependent soil-water characteristic curve, which allows the hydraulic behavior to fully couple with the mechanical behavior that is described by an extended critical state soil model for unsaturated soil through the specific volume. Considering the boundary condition and introducing an auxiliary coordinate, the problem is formulated to a system of first-order differential equations with three principal stress components and suction as basic unknowns, which is solved as an initial value problem. Parameter analyses are conducted to investigate the effects of suction and the overconsolidation ratio on the overall expansion responses, including the pressure-expansion response, the distribution of the stress components around the cavity, and the stress path of the soil during cavity expansion. The results reveal that the expansion pressures and the distribution of the stress components in unsaturated soils are generally higher than those in saturated soils due to the existence of suction.

• 한국항공우주학회지
• /
• 제31권2호
• /
• pp.35-40
• /
• 2003

홀 확장법은 홀 주위에 압축 잔류응력을 생성시켜 홀에서의 균열발생을 지연시키고 피로수명을 향상시키기 위한 효과적인 방법이다. 여러 연구들이 이러한 이로운 효과에 초점을 맞추어 온 반면, 홀 확장 잔류응력이 존재하는 홀 쪽으로 성장해 가는 균열의 피로균열 성장에 관해서는 연구가 거의 이루어져 있지 않다. 본 논문의 목적은 홀 확장 잔류응력하의 피로특성을 평가하는 것이다. 중앙 홀을 갖는 평판에 대해 홀 확장법을 적용한 후 피로시험을 수행하여 홀 확장 잔류응력이 피로수명에 미치는 영향을 평가하였다. 또한 CT 시험편에 홀 확장법을 적용하여 잔류응력을 생성시킨 후 피로균열성장 시험을 수행하여, 홀 확장 잔류응력에 의한 피로균열성장 특성의 변화를 고찰하였고, 홀 확장률의 영향을 평가하였다.

• Structural Engineering and Mechanics
• /
• 제61권6호
• /
• pp.795-806
• /
• 2017

According to the characteristics of continuous beam bridges, the relative displacement is too large to collision or even girder falling under earthquakes. A device named Cable-sliding Modular Expansion Joints(CMEJs) that can control the relative displacement and avoid collision under different ground motions is proposed. Working principle and mechanical model is described. This paper design the CMEJs, establish the restoring force model, verify the force model of this device by the pseudo-static tests, and describe and analyze results of the tests, and then based on a triple continuous beam bridge that has different heights of piers, a 3D model with or without CMEJs were established under Conventional System (CS) and Seismic Isolation System (SIS). The results show that this device can control the relative displacement and avoid collisions. The combination of isolation technology and CMEJs can be more effective to achieve both functions, but it need to take measures to prevent girder falling due to the displacement between pier and beam under large earthquakes.