• 산업식품공학
• /
• 제13권2호
• /
• pp.122-129
• /
• 2009

자외선 살균소독기의 유효성을 검정하기 위하여 스테인리스스틸 컵 바닥에서 E. coli를 대상으로 살균력을 측정하고 살균패턴을 조사하였다. 스테인리스스틸 컵 바닥의 자외선 강도는 컵의 위치에 따라 큰 차이를 보였다. 중앙부에 놓인 컵의 바닥에서는 높은 자외선 강도를 보인 반면 외곽으로 갈수록 자외선 강도는 급격하게 약화되었으며, 이러한 편차는 상단 선반에서 가장 심하였고 중단 및 하단선반으로 갈수록 완화되었다. E. coli를 대상으로 한 스테인리스스틸 컵 바닥에서 살균효과는 컵 바닥의 자외선 강도와 살균시간에 비례하였다. 자외선에 의한 E. coli 살균패턴은 tailing을 수반하는 의사 1차반응으로 나타났으며 각 구간의 살균속도상수를 산출한 결과 초기 살균속도상수 ($K_{1}$)는 위치에 따라 큰 차이를 보인 반면 후기 살균속도상수($K_{2}$)는 위치에 따른 차이가 크지 않았다. 현장에서 자외선 살균소독기를 용이하게 사용할 수 있도록 일정 살균치를 얻는데 필요한 자외선 조사시간을 산출하는 방정식을 제시하였다.

• 상하수도학회지
• /
• 제33권6호
• /
• pp.469-480
• /
• 2019

This study was conducted to evaluate the degradation and mineralization of PPCPs (Pharmaceuticals and Personal Care Products) using a CBD(Collimated Beam Device) of UV/H₂O₂ advanced oxidation process. The decomposition rate of each substance was regarded as the first reaction rate to the ultraviolet irradiation dose. The decomposition rate constants for PPCPs were determined by the concentration of hydrogen peroxide and ultraviolet irradiation intensity. If the decomposition rate constant is large, the PPCPs concentration decreases rapidly. According to the decomposition rate constant, chlortetracycline and sulfamethoxazole are expected to be sufficiently removed by UV irradiation only without the addition of hydrogen peroxide. In the case of carbamazepine, however, very high UV dose was required in the absence of hydrogen peroxide. Other PPCPs required an appropriate concentration of hydrogen peroxide and ultraviolet irradiation intensity. The UV dose required to remove 90% of each PPCPs using the degradation rate constant can be calculated according to the concentration of hydrogen peroxide in each sample. Using this reaction rate, the optimum UV dose and hydrogen peroxide concentration for achieving the target removal rate can be obtained by the target PPCPs and water properties. It can be a necessary data to establish design and operating conditions such as UV lamp type, quantity and hydrogen peroxide concentration depending on the residence time for the most economical operation.

• 해양환경안전학회지
• /
• 제8권2호
• /
• pp.23-27
• /
• 2002

Reballasting at sea, as recommended by the IMO guidelines, currently provides the best-available measure to reduce the risk of transfer of harmful aquatic organisms, but is subject to serious ship-safety limits. It is therefore extremely important that alternative, effective ballast water management and treatment methods are developed as soon as possible, to replace reballasting at sea. Filtration-Ultraviolet radiation-Electrolytic process (FUE) was evaluated for disinfection of seawater used In ballast water Optimal current density and UV light intensity were 2.0A/dm$^2$ and, 220㎼/$\textrm{cm}^2$/m with which 100% reduction time was 2sec in a Ultraviolet radiation-Electrolytic process. This study showed that FUE process was effective for the disinfection of commonly isolated bacteria and bacillus from ballast water.

• 천문학회보
• /
• 제35권1호
• /
• pp.76.2-76.2
• /
• 2010

We report the extended far-ultraviolet (FUV) halo of NGC 891 above the galactic plane. The FUV intensity distribution is well described by two exponential components, one with the scale height of ~0.34 kpc and the other of ~2.3 kpc. The extraplanar FUV halo is traceable up to > 5 kpc. The FUV halo is attributable to scattered-off starlight by extraplanar dust. Using Monte-Carlo radiative transfer simulations, the FUV intensity distribution along the minor axis is found to be well modeled with two dust comonents. Its implications are discussed.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2009년도 제37회 하계학술대회 초록집
• /
• pp.368-368
• /
• 2009

• 보존과학회지
• /
• 제32권4호
• /
• pp.501-510
• /
• 2016

생칠(L), 정제칠(TL), 생칠과 아교를 배합한 천연접착제(LG), 우루시올과 아교를 배합한 천연접착제(UG)의 자외선에 의한 노화 특성을 비교 분석하기 위해 도막 시편에 자외선을 조사하고 광택도, 주사전자현미경분석, 적외선분광분석, 인장전단 접착강도 측정을 수행하였다. 천연접착제 LG, UG의 광택 저하 속도는 생칠보다 다소 느렸고 손실률도 생칠보다 낮았다. 또한 생칠 도막의 표면은 자외선 노출 시간에 따라 다당류 층이 드러나 구형이 손상되면서 크랙이 발생한 것으로 관찰되었고 천연접착제 LG와 UG는 매끄러운 표면이 계속 유지됨을 관찰하였다. FT-IR 분석 결과 생칠과 정제칠 도막에서 자외선 조사 시간이 증가할수록 전체적으로 피크 세기가 감소하였고 천연접착제 LG는 변화가 없는 것으로 나타났다. 천연접착제 UG에서는 일부 피크가 사라졌고 전체적으로 세기가 감소했다. 생칠의 인장전단 접착강도는 자외선 노출 600시간 이후로 강도 값이 크게 떨어지는 것에 비해 천연접착제 LG와 UG의 접착강도는 다소 감소하거나 유지되었다. 선행연구 결과와 비교하면 옻과 아교를 이용한 천연접착제는 생칠에 비해 고온 고습에서도 큰 변화를 나타내지 않았고 자외선 조건에서도 물성을 유지하므로 생칠에 비해 내구적인 것으로 나타났다.

• Journal of Applied Biological Chemistry
• /
• 제58권1호
• /
• pp.25-29
• /
• 2015

The determination of the optimum conditions for the conversion of ergosterol to vitamin $D_2$ in shitake mushrooms (Lentinula edodes) was studied using response surface methodology (RSM). The effects of the three main variables ambient temperature ($20-40^{\circ}C$), exposure time (60-180 min), and irradiation intensity ($0.6-1.8W/m^2$) were investigated. According to the RSM ridge analysis, the optimum conditions were as follows: ambient temperature of $34.2^{\circ}C$, exposure time of 175.6 min, and irradiation intensity of $1.41W/m^2$. Under these optimum conditions, the maximum vitamin $D_2$ content of $117.93{\mu}g/g$ in shitake mushrooms was obtained, which agreed fairly well with the predicted value of $122.60{\mu}g/g$.

• 한국재료학회지
• /
• 제16권3호
• /
• pp.163-167
• /
• 2006

The transition of europium-doped gadolinium oxide phosphor to gadolinium borate phosphor with the concentration of boron in the spray pyrolysis was investigated. The particles prepared from spray solution below 10 wt% boric acid of prepared phosphor had crystal structure of $Gd_2O_3:Eu$ phosphor, in which the crystallinity of the particles decreased with increasing the boron concentration. A single phase $GdBO_3:Eu$ phosphor particles were prepared from spray solution above 50 wt% boric acid of prepared phosphor. The phosphor particles prepared from spray solution with 20 wt% boric acid of prepared phosphor had no XRD peaks of $Gd_2O_3:Eu$ and $GdBO_3:Eu$ Therefore the phosphor particles prepared from spray solution with 20 wt% boric acid of prepared phosphor had the lowest photoluminescence intensity under ultraviolet and vacuum ultraviolet. $GdBO_3:Eu$ and $Gd_2O_3:Eu$ phosphor particles prepared from spray solutions with proper concentrations of boric acid had good photoluminescence intensity under vacuum ultraviolet. The morphology of the phosphor particles were strongly affected by the concentrations of boric acid added into spray solution.

• 조명전기설비학회논문지
• /
• 제26권4호
• /
• pp.35-40
• /
• 2012

In this study, the ultraviolet (UV) intensity of polymer insulator was measured using the Anti-Reflective (AR) coating lens on the occurrence of corona discharge. The UV intensity was compared before and after the AR coating. Under the 200-260[nm] of UV lens, the reflection rate before AR coating was 7.5~5.5[%] with 85-89[%] of transmission rate. After AR coating, however, the reflection rate decreased to 1.3~1.22[%] with improved transmission (97.4~97.6[%]). Then, the UV intensity by distance was measured in the polymer insulator. According to the measurement, the UV intensity increased 6.5 times at 37.5[%] of Vm/Vbd with 5[m] of distance. As distance increased, the growth rate declined. As high voltage increased, in addition, AR coating was less effective due to the count error caused by the UV sensor pulse signal overlap. Therefore, it appears that it would be more effective to detect corona discharge with 5[m] or less of distance at diagnosis of power facilities by AR coating and UV sensor sensitivity.

• 한국염색가공학회지
• /
• 제23권3호
• /
• pp.179-186
• /
• 2011

For the application of Jeju scoria scattered around the island as a natural dye, cotton fabrics were dyed with the dye and their properties were measured including dyeability, colorfastness, antibacterial activity, deodorization efficiency, ultraviolet protection, and far-infrared emission. The dyed cotton fabrics were in yellowish red and optimal dyeing conditions were obtained with a colorant concentration of 25%(o.w.b) at a temperature of $80^{\circ}C$ for the dyeing time of 120 minutes. The ratings of colorfastness to light, rubbing, perspiration, and washing were 8, 5, 5, and 4~5 respectively. After 15 wash cycles, colorfastness remained as much as 4~5 rating. The cotton fabric dyed with Jeju scoria demonstrated excellent antimicrobial activity and deodorization efficiency of 99.9% and 93.9% respectively. Ultraviolet protection factor was 50+. Far-infrared emission rate and far-infrared emission intensity were 90% and 362(W/$m^2{\cdot}{\mu}m$) respectively. The Jeju scoria can be introduced as a new colorant for the natural dyeing of cotton.