• 제목/요약/키워드: Ultraviolet Irradiation

검색결과 542건 처리시간 0.022초

광학이성 유기단분자막 전류특성 (Current Properties Of Photoisomerization Organic Monolayer)

  • 김동관;강용철;이경섭
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 1999년도 추계학술대회 논문집
    • /
    • pp.487-490
    • /
    • 1999
  • The Maxwell displacement current was generated from 4-octyl-4'-(5-carboxyl-pentamethyleneoxy)- azobenzene (denoted as 8A5H) monolayer Langmuir-Blodgett films prepared on Cr/Au-coated glass substrates due to trans-cis photoisomerization of 8A5H by application of alternate irradiation with UV light and Visible light. The displacement current was generated due to the trans-to-CIS photoisomerization by irradiation with ultraviolet light($\lambda_1$=360nm). Whereas the displacement current was generated in the opposite direction due to the cis-to-trans photoisomerization by photoirradiation with visible light($\lambda_2$=450nm). Finally, We concluded that Displacement current change according to power capacity photoirradiation, the more higher generate the more higher power capacity magnitude.

  • PDF

PCEMA 광폴리머의 광중합 작용을 이용한 액정배향 (Liquid crystal alignment by photo-dimerization reaction of PCEMA photo polymer)

  • 황정연;서대식
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 1999년도 추계학술대회 논문집
    • /
    • pp.541-544
    • /
    • 1999
  • We synthesised a novel photo-alignment material of PCEMA (poly(cinnamolyethyl methacrylate)) on photo-dimerization reaction. Next we investigated the electro-optical (EO) characteristics of photo-aligned twisted nematic (TN)-liquid crystal display (LCD) with linearly polarized ultraviolet (UV) light irradiation on PCEHA surface. The excellent voltage-transmittance characteristics of photo-aligned TN-LCD on PCEMA surface were obtained. The threshold voltage of photo-aligned TN-LCD decreases with increasing the UV light irradiation time on PCEMA surface. Also, the response time of photo-aligned TN-LCD on PCEMA surface is almost the same as rubbing-aligned TN-LCD.

  • PDF

자외선 조사된 HTV 실리콘 고무의 표면열화 분석 (Analysis of the Surface Degradation in UV-irradiated High-Temperature Vulcanized Silicone Rubber)

  • 연복희;이태호;허창수;이종한
    • 한국전기전자재료학회논문지
    • /
    • 제13권5호
    • /
    • pp.411-419
    • /
    • 2000
  • In this paper we have investigated the surface degradation by ultraviolet-irradiation in high-temperature vulcanized silicone rubber. Through the measurement of surface potential decay by corona-charging and of contact angle it is found that the change of surface electrostatic properties and the decrease of contact angle under UV-radiation. For the changes in micro-morphological and chemical structure of the UV-treated silicone rubber we utilized several analytical techniques such as SEM, ATR-FTIR,XPS. From this study it is shown that the chemical reactions(scissoring of side chain(S-$CH_3$) cross-linking and branching) occur on the surface of silicone rubber during the UV-irradiation. Also we obtained the results of the loss of low molecular weight chain by cross-linking and oxidation reaction.

  • PDF

Poly(vinyl)cinnamate막을 이용한 A-TN-LCD의 전기광학 특성 (Investigation of Electro-optical Characteristics in A-TN-LCD on Poly(vinyl)cinnamate Surfaces)

  • 서대식;박지호;이보호
    • E2M - 전기 전자와 첨단 소재
    • /
    • 제10권6호
    • /
    • pp.576-580
    • /
    • 1997
  • In this paper, the viewing angle characteristics of amorphous (a) - twisted nematic (TN)-liquid crystal display (LCD) on poly(vinyl)cinnamate (PVC) surface with UV (ultraviolet) light irradiation were investigated. It was found that the threshold voltage increases with increasing the polymerization of PVC surfaces. We observed that the domain size of a-TN-LCD decreases with increasing the photo polymerization by increasing UV light irradiation time on PVC films. Also, we observed that the viewing angle of a-TN-LCD increased with increasing the photo polymerization on PVC surfaces. Finally, we consider that the viewing angle of a-TN-LCD on PVC surfaces is large compared to a-TN-LCD on polyimide (PI) surface.

  • PDF

Synthesis of Hybrid Fullerene Oxide[C60(O)n, (n≥1)] - Silver Nanoparticle Composites and Their Catalytic Activity for Reduction of 2-, 3-, 4-Nitroaniline

  • Park, Jeong Hoon;Ko, Jeong Won;Ko, Weon Bae
    • Elastomers and Composites
    • /
    • 제54권3호
    • /
    • pp.252-256
    • /
    • 2019
  • Fullerene oxide[$C_{60}(O)_n$, ($n{\geq}1$)] was synthesized by dissolving fullerene[$C_{60}$] and 3-chloroperoxybenzoic acid in toluene under refluxing condition for 5 h. Hybrid fullerene oxide-silver nanoparticle composites were synthesized by dissolving fullerene oxide and silver nitrate[$AgNO_3$] in diethylene glycol under ultrasonic irradiation for 3 h. The synthesized hybrid nanocomposites were characterized by X-ray diffraction, scanning electron microscopy, and ultraviolet-visible[UV-vis] spectroscopy. The catalytic activity for the reduction of various nitroanilines[NAs] was identified by UV-vis spectrophotometer. The efficiency of the catalytic reduction by the synthesized hybrid nanocomposites has an order of 4-NA > 2-NA > 3-NA.

Photochemical Studies of Schiff Base Cu(II) Complex: (1) UV-Irradiation of N,$N^{\prime}$-bis(salicylidene)ethylenediamine copper(II)

  • 안병태
    • Bulletin of the Korean Chemical Society
    • /
    • 제16권3호
    • /
    • pp.202-204
    • /
    • 1995
  • The ultraviolet photochemistry of N,N'-bis(salicylidene)ethylenediamine copper(II), Cu(sal)2en, was investigated with low pressure mercury lamp. Redution of Cu(Ⅱ) and formation of Cl- were shown on 254 nm irradiation both for aerated and deaerated chlorinated hydrocarbon solvent such as CH2Cl2, chloroform, and 1,2-dichloroethane. Relatively long lived $({\tau}=100{\mu}sec)$ intermediate was detected by flash photolysis. Overall photo-process can be described as the formation of Cl- and new copper complex, product(1) by chlorohydrocarbon mediation, photoinduced reduction by abstraction of halogen from solvent, followed by redox induced substitution of axial ligand with chlorine. Product(1) is possibly Cu(III) chlorosalicylaldeimido complex and cyclic -CH2CH2- moiety is absent in the structure. 247nm band of Cu(sal)2en should contain ligand to metal charge transfer character.

The Anti-calcification Effect of Dithiobispropionimidate, Carbodiimide and Ultraviolet Irradiation Cross-linking Compared to Glutaraldehyde in Rabbit Implantation Models

  • Park, Samina;Kim, Soo Hwan;Lim, Hong-Gook;Lim, Cheong;Kim, Yong Jin
    • Journal of Chest Surgery
    • /
    • 제46권1호
    • /
    • pp.1-13
    • /
    • 2013
  • Background: Glutaraldehyde (GA) is a widely used cross-linking agent for improving mechanical properties and resistance to enzymatic degradation of collagenous tissue, but it has several drawbacks such as calcification and cytotoxicity. The aim of this study was to find the alternative effective cross-linking methods to GA. Materials and Methods: Bovine pericardium was processed with GA with ethanol+octanol and glycine detoxification, and polyethylene glycol (PG) space filler, dimethyl 3,3'-dithiobispropionimidate (DTBP), 1-ethyl-3-(3-dimethylaminopropyl) carbodiimide (EDC) treatment, and the physical fixation of ultraviolet irradiation were done. The biologic material properties of variously treated pericardial tissues were assessed by biochemical, mechanical and histological tests. Treated pericardial tissues were also implanted subcutaneously or intramuscularly into the rabbit for 10 weeks to assess the xenoreactive antibody response of immunoglobulin G and M, their anti-calcification effect. Results: The biochemical and mechanical properties of EDC fixed pericardial tissues were comparable to the GA fixed tissue. The cytotoxicity was lowest in space filler treated GA fixed group. In rabbit subcutaneous or intramuscular implantation models, decellularization, space filler, EDC treatment group showed significantly lower calcium content than GA only and DTBP treatment group (p<0.05, analysis of variance). The titer of anti $Gal{\alpha}1-3Gal{\beta}1$-4GlcNAc-R antibodies did not change in the postimplantation serial enzyme-linked immunosorbent assay. Hematoxylin and eosin and von Kossa staining showed that decellularization, space filler, EDC, and ultraviolet treatment had less inflammatory cell infiltration and calcium deposits. Conclusion: The decellularization process, PG filler, and EDC treatments are good alternative cross-linking methods compared to GA only fixation and primary amine of DTBP treatment for cardiovascular xenograft preservation in terms of the collagen cross-linking stability and in vivo anti-calcification effects.

Nd:YAG 레이저의 근적외선과 자외선 펄스를 이용한 NiP 하드디스크 기층의 세척 (Cleaning of Nip Hard Disk Substrate Using Near-Infrared and Ultraviolet Irradiation of Nd:Yag Laser Pulses)

  • 김동식
    • 한국레이저가공학회:학술대회논문집
    • /
    • 한국레이저가공학회 2000년도 추계학술발표대회 논문개요집
    • /
    • pp.23-26
    • /
    • 2000
  • This paper introduces a cleaning process for removing submicron-sized particles from NiP hard disk substrates by the liquid-assisted laser cleaning technique. Measurements of cleaning performance and time-resolved optical diagnostics are performed to analyze the physical mechanism of contaminant removal. The results reveal that nanosecond laser pulses are effective for removing the contaminants regardless of the wavelength and that a thermal mechanism involving explosive vaporization of liquid dominates the cleaning process.

  • PDF

Nd:YAG 레이저의 근적외선과 자외선 펄스를 이용한 NiP 하드디스크 기층의 세척 (Cleaning of NiP Hard Disk Substrate Using Near-Infrared and Ultraviolet Irradiation of Nd:YAG Laser Pulses)

  • 김동식
    • 한국레이저가공학회지
    • /
    • 제4권2호
    • /
    • pp.39-45
    • /
    • 2001
  • This paper introduces a cleaning process for removing submicron-sized particles from NiP hard disk substrates by the liquid-assisted laser cleaning technique. Measurements of cleaning Performance and time-resolved optical diagnostics are Performed to analyze the physical mechanism of contaminant removal. The results reveal that nanosecond laser pulses are effective for removing the contaminants regardless of the wavelength and that a thermal mechanism involving explosive vaporization of liquid dominates the cleaning process.

  • PDF