• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2013년도 제45회 하계 정기학술대회 초록집
• /
• pp.264.2-264.2
• /
• 2013

Molecular layer deposition (MLD) is sequential, self-limiting surface reaction to form conformal and ultrathin polymer film. This technique generally uses bifunctional precursors for stepwise sequential surface reaction and entirely organic polymer films. Also, in comparison with solution-based technique, because MLD is vapor-phase deposition based on ALD, it allows epitaxial growth of molecular layer on substrate and is especially good for surface reaction or coating of nanostructure such as nanopore, nanochannel, nanwire array and so on. In this study, polyurea film that consisted of phenylenediisocyanate and phenylenediamine was formed by MLD technique. In situ Fourier Transform Infrared (FTIR) measurement on high surface area SiO2 substrate was used to monitor the growth of polyurethane and polyurea film. Also, to investigate orientation of chemical bonding formed polymer film, plan-polarized grazing angle FTIR spectroscopy was used and it showed epitaxial growth and uniform orientation of chemical bones of polyurea films.

• 전기화학회지
• /
• 제20권2호
• /
• pp.41-48
• /
• 2017

폴리올레핀 분리막의 내열성을 향상시키면서도 전기화학특성 개선을 위해 RF Magnetron Sputter기반으로 수십 나노미터 수준의 세라믹 층이 코팅된 내열 분리막을 제조하였다. 분리막 원단의 열적 손상없이 코팅 시간을 최소화하기 위한 증착 조건을 최적화 하였고, 이를 기반으로 제조된 내열 분리막의 물리적, 전기화학적 평가를 진행하였다. 약 20 nm의 $Al_2O_3$가 코팅된 Polypropylene(PP) 분리막은 원단 분리막 대비 통기 특성 (원단: 211.3 sec/100 mL, 코팅 분리막: 250.8 sec/100 mL)은 떨어졌으나, 열 수축율 (원단: 19.4%, 코팅 분리막: 0.0% @ $140^{\circ}C$ & 30 min), 전해액 Uptake(원단: 176%, 코팅 분리막: 190%) 및 이온전도도 (원단: 0.700 mS/cm, 코팅 분리막: 0.877 mS/cm)는 모두 향상되었다. 그 결과, 2032-type Half-cell($LiMn_2O_4/Li$)을 이용한 전기화학적 평가에서도, 향상된 율별 특성과 유사한 수명 특성을 나타내었다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2011년도 제41회 하계 정기 학술대회 초록집
• /
• pp.217-217
• /
• 2011

Recently, demand for thermally stable metal nanoparticles suitable for chemical reactions at high temperatures has increased to the point to require a solution to nanoparticle coalescence. Thermal stability of metal nanoparticles can be achieved by adopting core-shell models and encapsulating supported metal nanoparticles with mesoporous oxides [1,2]. However, to understand the role of metal-support interactions on catalytic activity and for surface analysis of complex structures, we developed a novel catalyst design by coating an ultra-thin layer of titania on Pt supported silica ($SiO_2/Pt@TiO_2$). This structure provides higher metal dispersion (~52% Pt/silica), high thermal stability (~600$^{\circ}C$) and maximization of the interaction between Pt and titania. The high thermal stability of $SiO_2/Pt@TiO_2$ enabled the investigation of CO oxidation studies at high temperatures, including ignition behavior, which is otherwise not possible on bare Pt nanoparticles due to sintering [3]. It was found that this hybrid catalyst exhibited a lower activation energy for CO oxidation because of the metal-support interaction. The concept of an ultra-thin active metal oxide coating on supported nanoparticles opens-up new avenues for synthesis of various hybrid nanocatalysts with combinations of different metals and oxides to investigate important model reactions at high-temperatures and in industrial reactions.

• Journal of Oral Medicine and Pain
• /
• 제8권1호
• /
• pp.33-41
• /
• 1983

The authors observed the ultrastructure of oral leukoplakia simplex of gingiva, buccal mucosa, tongue and alveolar ridge. For the purpose of clearly defining the lesions under investigation in this study, leukoplakias were cinsidered to be any white patches on the oral mucous membranes that could not be removed by rubbing and could not be classified clinically or microscopically as another diagnosable disease. The tissue to be examined were embedded in paraffin for light microscopic study. The tissue to be examined under the electronomicroscope were fixed in 2.5% glutaraldehyde in 0.1M cacodylate buffer and 1% osmic acid in 0.1M cacodylate buffer, dehydrated with guaded alchol, and treated with propylene oxide, and embedded in Epon.Ultrathin sections were obtained by LKB III ultrotome, stained with uranyl acetate/lead citrate, and examined with Corinth 500EM. The results were as follows : 1. Epithelium of leukoplakia consisted of stratum basale, stratum spinosum, stratum granulosum and stratum corneum. 2. There was hyperorthokerotosis or hyperparakeratosis. 3. Granular cells contained a lot number of membrane coating granule showing lamellar structure, clearing ot codensation, and a lot of keratohyaline granule varied in size. 4. An increased concentration of tonofilaments and an increased number of desmosomes were found in the stratum spinosum. 5. Basal lamina generally showed its continuity, but in some locatoins, its interreption and multiplication appeared.

• Applied Microscopy
• /
• 제10권1_2호
• /
• pp.7-17
• /
• 1980

Electron microscope radioautography introduced by Liquier-Milward (1956) is now used routinely in many laboratories. Most of the technical difficulties in specimen preparation have been overcome. This method is modified from loop method for improvement of EM radioautographic techniques. The advantages of this method are: 1. the use of single specimens on small corks and of a large wire loop, allows the experimenter to avoid the blemishes in the membrane; 2. the surfactant dioctyl sodium sulphosuccinate is added to diluted ILford L4, thus greatly prolonging the period of time over which good emulsion layers can be made; 3. corks can be handled in perspex holder which allows about 20 specimens to be developed simultaneously. The steps of the method comprise: 1. Cut ribbons of ultrathin sections of silver interference colour 2. Pick them up on formvar-coated 200 mesh grids 3. Prestaining of tissues 4. Coat the specimens with a thin layer of carbon by evaporation (30-60A) 5. Mount the specimens on corks (about 1cm apical diameter) using double-sided scotch tape 6. Emulsion coating; a. Take a 250m1 beaker, place it on the pan of a sliding weight balance and weigh it. Add 10 grams extra to the beam. Add pieces of ILford L4 emulsion to the beaker until the balance is swinging freely. Add the 20ml of distilled water that was previously measured out. b. Surfactant dioctyl sodium sulphosuccinate is added to diluted ILford L4. 7. Prepare a series of membranes of gelled emulsion with the wire loop and apply one to each cork-borne specimen. 8. Put the specimens away to expose by pushing the corks into short length of PVC tubing, each tube having a small hole in the side 9. Place the tubes in small boxes together with silica gel. 10. Exposure 11. Developer - Kodak Microdol X for 3 minutes 12. Fixer - A perspex holder can be manufactured which allows 20 specimens to be developed simultaneously. 12. Fixer - 30% sodium thiosulfate for 10 minutes 13. Examination with Siemens Elmiskop 1A electron microscope

• Journal of Ceramic Processing Research
• /
• 제22권2호
• /
• pp.192-199
• /
• 2021

Peony flower-like γ-Ga₂O₃ nanosheets (γ-Ga₂O₃ NSs) were synthesized and carbon layers were coated on their surfaces using a simple hydrothermal process with subsequent carbonization. The γ-Ga₂O₃ NSs comprised ultrathin layers, which are tens of nanometers in thickness. The carbon-coated γ-Ga₂O₃ NS (γ-Ga₂O₃@C NS) electrode exhibited a specific capacity of 598 mAh g^-1 at 200 cycles, at a current density of 0.5 A g^-1, higher than that of γ-Ga₂O₃ NSs (60 mAh g^-1). Furthermore, a specific capacity of 100 mAh g^-1 at 5 A g^-1 was achieved owing to the low charge transfer resistance through the carbon layers. This study suggests that two-dimensional γ-Ga₂O₃@C NSs with both large specific area and high charge carrier transport are promising active materials for lithium-ion battery anodes with better electrochemical performance.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2013년도 춘계학술대회 논문집
• /
• pp.835-841
• /
• 2013

Modern solid-state gyroscopes (HRG) with hemispherical resonators from high-purity quartz glass and special surface superfinishing and ultrathin gold coating become the best instruments for precise-grade inertial reference units (IRU) targeting long-term space missions. Designing of these sensors could be a notable contribution into development of Korea as a space nation. In participial, 40mm diameter thin-shell resonator from high-purity fused quartz, fabricated as a single-piece with its supporting stem has been designed, machined, etched, tuned, tested, and delivered by STM Co. (ATS of Ukraine) several years ago; an extremely-high Q-factor (upto 10~20 millions) has been shown. Understanding of the best way how to match such a unique sensor with inner glass assembly of the gyro means how to use the high potential in a maximal extent; and this has become the urgent task. Inner quartz glass assembly has a very thin indium (In) layer soldered the resonator and its silica base (case), but effects of internal resonances between operational modal pair of the shell-cup and its side (parasitic) modes can notable degrade the potential of the sensor as a whole, instead of so low level of resonator's intrinsic losses. Unfortunately, there are special combinations of dimensions of the parts (so-called, "resonant sizes"), when intensive losses of energy occurs. The authors proposed to use the length of stem's fixture as an additional design parameter to avoid such cases. So-called, a cyclic scheme of finite element method (FEM) and ANSYS software were employed to estimate different combinations of gyro assembly parameters. This variant has no mismatches of numerical origin due to FEM's discrete mesh. The optimum length and dangerous "resonant lengths" have been found. The special attention has been paid to analyses of 3D effects in a cup-stem transient zone, including determination of a difference between the positions of geometrical Pole of the resonant hemisphere and of its "dynamical Pole", i.e., its real zone of oscillation node. Boundary effects between the shell (cup) and 3D short "beams" (inner and outer stems) have been ranged. The results of the numerical experiments have been compared with the classic model of a quasi-hemispherical shell band with inextensional midsurface, and the solution using Rayleigh's functions of the $1^{st}$ and $2^{nd}$ kinds. To guarantee the truth of the recommended sizes to a designer of the real device, the analytical and FEM results have been compared with experimental data for a party of real resonators. The consistency of the results obtained by different means has been shown with errors less than 5%. The results notably differ from the data published earlier by different researchers.

• 멤브레인
• /
• 제6권3호
• /
• pp.173-181
• /
• 1996

실리콘 코팅한 복합막을 이용하여 톨로엔이나 메탄올 같은 휘발성 유기화합물의 제거 및 회수에 관한 연구를 수행하였다. 사용된 막은 코팅층의 두께가 얇고($~1\mu$m), 지지층의 기고율이 커서 투과저항은 적었으며 코팅층과 지지층은 플라즈마 중합에 의해 결합되어 있어서 높은 압력에도 견딜 수 있었다. Feed의 유속은 60cc/min. 이하일 때 사용된 모듈에 위해 휘발성 유기화합물의 제거율은 96~99%이었으며, feed의 농도가 높을수록 제거율은 더 증가하였다. 이 공정은 휘발성 유기화합물의 농도가 높고 유속이 낮은 흐름을 처리하는데 아주 적합함을 알 수 있었다. 사용된 막을 통한 휘발성 유기 화합물들의 투과도는 $4~30 \times 10^{-9}gmol/sec \cdot cm^{2}\cdot cmHg$이었고, 질소의 투과도는 $3~9 \times 10^{-10}gmol/sec \cdot cm^{2} \cdot cmHg$의 범위에 있었다. 휘발성 유기화합물과 질소의 선택도는 유속과 휘발성 유기화합물의 농도에 따라 톨루엔/질소의 경우 10~55, 메탄올/질소의 경우 15~125의 값을 얻었다.