• Journal of Dairy Science and Biotechnology
• /
• v.25 no.2
• /
• pp.5-10
• /
• 2007

Ultrasonication was employed to prepare solid lipid nanoparticles (SLN) for smart probiotic nanoparticles as a nanofood. The model probiotic material, lactocin from Lactobacillus plantarum (CBT-LP2), was incorporated into SLN. The CBT-LP2 loaded SLN (CBT-LP2-SLN) were spherical in the photograph of scanning electron microscope (SEM). The particle size measured by laser diffraction (LD) was found to be $97.3{\pm}8.2nm$. Zeta potential analyzer suggested the zeta potential of LP-SLN was $-29.36{\pm}3.68$ mV in distilled water. The entrapment efficiency (EE%) was determined with the sephadex gel chromatogram and high-performance liquid chromatogram (HPLC), and up to 90.59% of nanofood was incorporated. Stability evaluation showed relatively long-term stability with only slight particle growth (P>0.05) after storage at room temperature for 4 weeks. Therefore, ultrasonication is demonstrated to be a simple, available and effective method to prepare high quality SLN loaded probiotic material.

• Journal of Biosystems Engineering
• /
• v.28 no.4
• /
• pp.325-334
• /
• 2003

Pinosylvin, a stilbenoid phytoalexin, is a health ingredient to be extracted from pine leaves. In this study, ultrasonication-assisted extraction process for manufacturing extracts with high content of pinosylvin from pine leaves was investigated. As process and system variables, ultrasonic power, sonication time and solvent ratio were selected. According to the experimental results, the effective yield of pinosylvin increased with the increase of ultrasonic power and sonication time and the decrease of solvent ratio. When the ultrasonic power of 2400 W/L was added to the solution of pulverized pine leaves of 8 g per 1 L of a solvent for 10 minutes, yield of extracts and purity, effective yield and concentration ratio of pinosylvin were 0.3166 g/g, 0.7247 mg/g, 0.2294 mg/g and 23.0, respectively.

• Korean Journal of Pharmacognosy
• /
• v.46 no.2
• /
• pp.154-159
• /
• 2015

This study was to evaluate the effect of isopropyl alcohol fraction of ultrasonication processed ginseng flower buds(GFB-IF) on the collagen synthesis activity and inhibition of MMP-1 suppression in UV-irradiated human dermal fibroblasts. The higher contents of ginsenoside Rg2(8.234%), Rh1(5.749%), F4(3.881%) in isopropyl alcohol fraction of ginseng flower buds obtained by ultrasonication process at 600W(100℃) for 16 hours. GFB-IF had collagen synthesis effect. GFB-IF induced a significant dose-dependent decrease in the expression for MMP-1 protein. These results suggest that GFB-IF is a potential candidate for the prevention and treatment of wrinkle improving.

• Bulletin of the Korean Chemical Society
• /
• v.32 no.4
• /
• pp.1179-1182
• /
• 2011

In the present work, successful implementation of ultrasound irradiations for the rapid synthesis of 1,5-benzodiazepine derivatives under solvent-free conditions is demonstrated. Use of a novel catalyst i.e. camphor sulphonic acid in combination with ultrasound technique is reported for the first time. Comparative study for the synthesis of 1,5-benzodiazepines using conventional as well as ultrasonication method is discussed.

• Natural Product Sciences
• /
• v.21 no.2
• /
• pp.93-97
• /
• 2015

The purpose of this study was to develop a new ginseng (Panax ginseng) flower buds extract with the high concentration of ginsenoside Rg3, Rg5, Rk1, Rh1 and F4, the Red ginseng special component. Chemical transformation from the ginseng saponin glycosides to the prosapogenin was analyzed by the HPLC. The ginseng flower buds were processed at the several treatment conditions of the ultrasonication (Oscillator 600W, Vibrator 600W) and vinegar (about 14% acidity). The result of UVGFB-480 was the butanol fraction of ginseng flower buds that had been processed with ultrasonication and vinegar for 480 minutes gained the highest amount of ginsenoside Rg5 (3.548%), Rh1 (2.037%), Rk1 (1.821%), Rg3 (1.580%) and F4 (1.535%). The ginsenoside Rg5 of UVGFB-480 was found to contain 14.3 times as high as ginseng flower buds extracts (GFB, 0.249%).

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2017.06a
• /
• pp.213-213
• /
• 2017

High quality seed of proso millet that has high germination percentage, germination speed, and uniformity demanded to increases rates of mechanization in cereal crop cultivation. In order to improve germination characteristics, proso millet seeds were treated with red light, ultrasonication and liquid smoke (LS) solution that generated from hickory wood. All treatments were performed in seed priming solution with 100mM $NH_4NO_3$ at $15^{\circ}C$ for 24hrs under aeration condition. Seeds were exposed under light intensity of 2000 lux for 15m, 30m, 60m, and 120m in priming solution. Ultrasonic treatment was performed at 60%, 80%, and 100% intensity of 21.6 KHz for 5m, 10m, and 20m in priming solution. For LS treatment seed were soaked in 0%, 0.5%, 1.0%, 5.0% and 10.0% of diluted solution with $dH_2O$ or 100mM $NH_4NO_3$ solution. The effect of seed treatment was evaluated with germination percentage (GP), mean germination time (MGT), germination index (GI), germination rate (GR), Germination uniformity (GU) and heath seed percentage (HS). Our results demonstrate that red light (15min) or ultrasonication (21.6kHz, 5min) treatment improved MGT, GI, GR, and GU comparing to untreated control. Importantly, we show that LS treatments have significant effect on the health seedling and germination characteristics. Proso millet seeds that treated with 5% LS solution for 24hrs improves HS up to 97% that similar results obtained in 100mM $NH_4NO_3$ priming for 24hrs. The combined treatment with LS solution and 100mM $NH_4NO_3$ priming were not effective in all treatments. Our results demonstrate that treating seeds with LS or 100mM $NH_4NO_3$ priming or ultrasonication improves germination characteristics. The methods described here will help advance research using this species by increasing the germination performance at which successive seed pellet process.

• Food Science of Animal Resources
• /
• v.40 no.6
• /
• pp.1044-1054
• /
• 2020

This study was performed to investigate the effects of lotus leaf hot water extracts treatment on the quality and stability of eggs using impregnation treatment through ultrasonication during storage. A total of 480 eggs were categorized into four treatment groups (n=30 each)-non-treated (CON), soaked for 30 min in lotus leaf hot water extracts without ultrasonication (T1), sonicated in distilled water (T2), and sonicated in lotus leaf hot water extracts (T3)-and stored for 15 d at 30℃. The egg weight, Haugh unit (HU), egg grade, albumen height, yolk color, eggshell thickness, eggshell breaking strength, and weight loss were measured for egg quality assessment. 2-Thiobarbituric acid reactive substance (TBARS) and volatile basic nitrogen (VBN) contents were measured as stability indicators. Additionally, total phenolic contents (TPC), total flavonoid contents (TFC), and 1,1-diphenyl-2-picrylhydrazyl (DPPH) radical scavenging activity were evaluated. The HU, egg grade, albumen height, and yolk color of T3 were significantly higher than those of CON (p<0.05). No significant differences in eggshell thickness and eggshell breaking strength are observed among the groups. The weight loss of T3 was significantly lower than that of the other groups during storage (p<0.05). The application of lotus leaf hot water extracts also significantly reduced TBARS and VBN (p<0.05). The TPC, TFC, and DPPH radical scavenging activity of T3 were significantly higher than those of the other groups (p<0.05). These results suggest that lotus leaf hot water extracts may be useful as a natural ingredient for improving the quality and stability of eggs during storage.

• Journal of Ginseng Research
• /
• v.42 no.4
• /
• pp.540-548
• /
• 2018

Background: Acute hepatic failure is a life-threatening critical condition associated with rapid deterioration of liver function and liver transplantation. Several studies have shown that Panax ginseng Mayer has antidiabetic and hepatoprotective effects. However, the hepatoprotective effect of ginseng berry is still unveiled. In this study, we evaluated the hepatoprotective effects of ultrasonication-processed ginseng berry extract (UGBE) on acute hepatic failure model in rats. Methods: Ginseng berry extract (GBE) was ultrasonically processed. The GBE, silymarin, and UGBE were orally administered to male Sprague-Dawley rats for 4 wk. Twenty-four h after the last administration, rats were challenged with D-galactosamine (D-GalN)/lipopolysaccharide (LPS). Results: After ultrasonication, the component ratio of ginsenosides Rg2, Rg3, Rh1, Rh4, Rk1, Rk3, and F4 in GBE had been elevated. Administration of UGBE significantly increased the survival rate of D-GalN/LPS-challenged rats. Pretreatment with UGBE significantly decreased serum alanine aminotransferase, aspartate aminotransferase, and total bilirubin levels in D-GalN/LPS-challenged rats in a dose-dependent manner. The levels of enzymatic markers for oxidative stress (superoxide dismutase, glutathione peroxidase, catalase, and glutathione) were increased by UGBE treatment in a dose-dependent manner. Tumor necrosis factor alphalevel, inducible nitric oxide synthase activities, and nitric oxide productions were reduced by UGBE treatment. In addition, hemeoxygenase-1 levels in liver were also significantly increased in the UGBE-treated group. The protein expression of toll-like receptor 4 was decreased by UGBE administration. Hematoxylin and eosin staining results also supported the results of this study showing normal appearance of liver histopathology in the UGBE-treated group. Conclusion: UGBE showed a great hepatoprotective effect on D-GalN/LPS-challenged rats via the toll-like receptor 4 signaling pathway.

• Carbon letters
• /
• v.27
• /
• pp.64-71
• /
• 2018

$TiO_2$-doped activated carbon fibers (ACFs) were successfully prepared as capacitive deionization (CDI) electrode materials by facile ultrasonication-assisted process. ACFs were treated with titanium isopropoxide (TTIP) and isopropyl alcohol solutions of different concentrations and then calcinated by ultrasonication without heat-treatment. The results show that a certain amount of anatase $TiO_2$ was present on the ACF surface. The specific capacitance of the $TiO_2$-doped ACF electrode was remarkably improved (by 93.8% at scan rate of $50mV\;s^{-1}$) over that of the untreated ACF electrode, despite decreases in the specific surface area and total pore volume upon $TiO_2$ doping. From the CDI experiments, the salt adsorption capacity and charge efficiency of the sample with TTIP percent concentration of 15% were found to considerably increase by 71.9 and 57.1%, respectively. These increases are attributed to the improved wettability of the electrode, which increases the number of surface active sites and facilitates salt ion diffusion in the ACF pores. Additionally, the Ti-OH groups of $TiO_2$ act as electrosorption sites, which increases the electrosorption capacity.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.31 no.1
• /
• pp.1-6
• /
• 2015

Recently, sericin has attracted increasing attention in biomedical and cosmetic research because of its useful properties including acceleration of wound healing, improvement of cell attachment, and inhibition of ultraviolet-B induced apoptosis. However, sericin films have poor mechanical properties, which restricts the application to those fields. In this study, cellulose nanofibril (CNF)/sericin composite films were fabricated by solvent casting, and the effects of ultrasonication time and CNF content on the solution turbidity, molecular conformation, and film mechanical properties of sericin film were examined. As the ultrasonication time increased, the turbidity of the CNF/sericin suspension decreased. Conversely, as the CNF content increased, the turbidity increased. However, ${\beta}$-sheet crystallization and mechanical properties remained almost unchanged by varying the ultrasonication time and CNF content, indicating that CNF is not effective to improve the mechanical properties of sericin films.