• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 학술대회 논문집 정보 및 제어부문
• /
• pp.117-119
• /
• 2004

In order to successfully exploit underwater resources, the first step would be a marine environmental research and exploration on the seafloor. Traditionally one sets up a long-term underwater experimental unit on the seafloor and retrieves the unit later after a certain period time. Essential to these applications is the reliable teleoperation and telemetering of the unit. This study presents ultrasonic-wave remote control system and an underwater sound recognition algorithm that can identify the sound signal without the influence of disturbances due to underwater environmental changes. The proposed method provides a means suitable for units which require low power dissipation and long-time underwater operation. We demonstrate its ability of securing stability and fast sound recognition through experimental methods.

• 한국산학기술학회논문지
• /
• 제10권10호
• /
• pp.2609-2614
• /
• 2009

휴대용 초음파 탐지기(Ultrasonic Detector)는 전기설비에서 발생하는 부분방전, 코로나, 아킹, 트래킹 등과 같은 전기적 방전현상 탐지에 매유 유용하다. 그러나 초음파 탐지기는 측정음의 특성을 사용자가 듣고 판정함으로써 주관적 반응에 의해 그 결과가 좌우되거나 정확히 판정하기 곤란하게 된다. 따라서 초음파 음의 특성을 구별할 수 있는 새로운 분석적 방법이 요구된다. 본 연구에서는 초음파 탐지기에 의해 측정된 코로나, 아킹, 트래킹의 초음파 음을 시각화 할 수 있는 초음파 분석프로그램을 개발하였다. 개발된 프로그램에 의한 분석적 방법을 사용함으로써 초음파 음의 특성에 의존하던 기존의 방식보다 초음파 진단결과의 정확성을 높일 수 있게 된다.

• Journal of Welding and Joining
• /
• 제14권6호
• /
• pp.37-47
• /
• 1996

An ultrasonic testing uses the directivity of the ultrasonic wave which propagates in one direction. The directivity is expressed as the relationship between the propagate direction and its sound pressure. The directivity of ultrasonic wave is related to determination of testing sensitivity, scanning pitch and defect location. This paper investigated the directivity of ultrasonic wave, which scattered from slit defect located in heat-affected zone (HAZ) in butt joint using visualization method. The directivity of shear waves scattered from slit defect were different according to probe direction (far defect, near defect) and probe position (forward movement, maximum echo position, backward movement). The difference of directivity of reflection wave was existed between 2 MHz and 4 MHz angle probes. In the case of 2 MHz angle probe, the directivity of reflection wave was appeared sharp form because of the relation wave length and defect size.

• 대한기계학회논문집B
• /
• 제23권7호
• /
• pp.893-900
• /
• 1999

Measuring temperature with ultrasonic wave apparatus is desirable in the cue of gas below $300^{\circ}$ because of the fact that the temperature of gas is the function of only sound velocity. In this study, being used a heatable wind channel and a blower. the variation of temperature is observed in accordance with flow rate(air velocity). The frequency modulation method is used to measure the temperature which is varying in hot air flow up to $100^{\circ}$. The length changed in the position of ultrasonic sensors is considered. Also. the effects of air velocity at the same temperature and various facing angles of ultrasonic sensors are considered. As a result of this study. it has been found that the temperature in gas flow is correctly measured regardless of both the distance of ultrasonic sensors and the variation of air velocity. and that there is just a little influence of facing angles.

• 정보처리학회논문지B
• /
• 제14B권6호
• /
• pp.407-412
• /
• 2007

초음파 의료 영상기기나 산업용 초음파 검사 시스템의 성능은 초음파 탐촉자의 성능에 의해 크게 좌우된다. 탐촉자의 성능 특성 정보는 보통 제작자가 제공하는 반사원의 초음파 R/F 신호와 주파수 특성에 의해 기술된다. 그러나 집속형 초음파 탐촉자의 경우, 두 자료로는 선명한 C-Scan 이미지를 얻을 수 있다는 것을 보증할 수는 없다. 그래서 집속형 초음파 탐촉자의 성능 평가를 위한 새로운 척도로 상대 초점크기 및 상대 유효초점영역의 모양을 제안한다. 상대 초점의 크기와 상대 유효초점영역의 모양은 쇠구슬로부터 획득된 초음파 R/F 신호를 가상 3차원 영상 복원 프로그램으로 처리하여 얻는다. 제시된 방법은 기존 자료로는 알 수 없었던 탐촉자 성능을 정확히 평가할 수 있었으며, 방법도 간단하여 실제 탐촉자 제작시 불/양품을 쉽게 가려 낼 수 있으며, 탐촉자 경년열화에 따른 성능 저하도 검출할 수 있는 장점을 갖는다. 결과적으로 초음파 영상기기나 산업용 초음파 검사 시스템의 성능을 담보할 수 있다.

• 한국분무공학회지
• /
• 제18권3호
• /
• pp.126-131
• /
• 2013

This paper describes the effect of ultrasonic frequency(f) on the atomization and deformation characteristics of single water droplet in an acoustic levitation field. To achieve this, the ultrasonic levitator that can control sound pressure and velocity amplitude by changing frequency was installed, and visualization of single water droplet was conducted with high resolution ICCD and CCD camera. At the same time, atomization and deformation characteristics of single water droplet was studied in terms of normalized droplet diameter($d/d_0$), droplet diameter(d) variation and droplet volume(V) variation under different ultrasonic frequency(f) conditions. It was revealed that increase of ultrasonic frequency reduces the droplet diameter. Therefore, it is able to levitate with low sound pressure level. It also induces the wide oscillation range, large diameter and volume variation of water droplet. In conclusion, the increase of ultrasonic frequency(f) can enhance the atomization performance of single water droplet.

• 한국음향학회:학술대회논문집
• /
• 한국음향학회 2002년도 하계학술발표대회 논문집 제21권 1호
• /
• pp.525-528
• /
• 2002

The speed of sound, transmission coefficient, and attenuation are measured around the center frequency 1 and 2 MHz in solid materials such as bone, sediment, rubber, and Lucite materials. Common and different characteristics of such materials in the sound speed, transmission coefficient, and attenuation are discussed. Ambiguities in estimating such acoustic characteristics we also addressed. Ultrasonic properties of the first and second kind waves are clarified for different materials. Discussions are concentrated on classes of sound speed, broadband ultrasonic attenuation (BUA), and correlations of sound speed and BUA with apparent density. New correlations of inverse sound speed square and BUA with apparent density are suggested.

• 대한방사선기술학회지:방사선기술과학
• /
• 제24권1호
• /
• pp.43-48
• /
• 2001

This study deals with the relationship between the magnitude of ultrasonic nonlinear parameter B/A, and sound speed of amount of fat present in biological media to measure B/A system using a wide band ultrasonic transducer. To represent this case, mixtures of egg whites and egg yolk were studied. Even though the differences in density and sound speed of the two egg components were in the range of 1%, B/A increase parabolically as a function of the fat density, which is not in agreement with the Yoshizumi et al's suggestion. In skim milk that does not contain fat, both the B/A and the sound speed increase with the solubility. It is considered that protein could affect these values.

• 비파괴검사학회지
• /
• 제30권3호
• /
• pp.207-211
• /
• 2010

In this paper, the fluid AID(acoustic inspection device) was developed to measure SOS(speed of sound) since fluids used in most of industrial fields have different properties and its equipment is highly expensive. From AID developed, it is intended to get potentially the capability to distinguish the kind of fluid using the measurement by the SOS at various fields. In order to measure the sound speed of specific fluids, the measurement system and ultrasonic sensors are composed. The fluid used in the experimental work are soybean oil, glycerin, diesel oil and the error of time difference due to the container wall is extracted for preliminary experiment. As results, the variations of sound speed according to the temperature change of target fluid were analyzed and the polynomial equations were proposed.

• Journal of the Korean Wood Science and Technology
• /
• 제42권2호
• /
• pp.193-206
• /
• 2014

Residual performance of old architectural wood which has been damaged was measured using Nondestructive Evaluation (NDE). The wood Pole Tester was used to assess ultrasonic velocity inside wood and drill resistance was determined using an IML-resistograph. For ultrasonic measurements squared timber and circular timber's measurements were separately conducted with 1,300 m/s as the standard ultrasonic velocity. The standard wood samples divided into two parts; a non-sound area (below the standard), and a sound area (above the standard). Furthermore, schematization of wood was compared with results naked eye observation. The drilling resistance test was performed for both length and thickness direction in wood. The internal of the drilling was set at 30 cm (length direction), 5 cm (width direction) and 30cm (thickness direction). A non-sound area was defined as that 1) amplitude is below 20% and 2) carbonization and deterioration are related.