• Nuclear Engineering and Technology
• /
• 제42권5호
• /
• pp.546-551
• /
• 2010

The objective of this research is to estimate the crack location and size of a carbon steel pipe by using a laser ultrasound guided wave for the wall thinning evaluation of an elbow. The wall thinning of the carbon steel pipe is one of the most serious problems in nuclear power plants, especially the wall thinning of the carbon steel elbow caused by Flow-Accelerated Corrosion (FAC). Therefore, a non-destructive inspection method of elbow is essential for the nuclear power plants to operate safely. The specimens used in this study were carbon steel elbows, which represented the main elements of real nuclear power plants. The shape of the wall thinning was an oval with a width of 120mm, a length of 80mm, and a depth of 5mm. The L(0,1) and L(0,2) modes variation of the ultrasound guided wave signal is obtained from the response of the laser generation/air-coupled detection ultrasonic hybrid system represent the characteristics of the defect. The trends of these characteristics and signal processing were used to estimate the size and location of wall thinning.

• Corrosion Science and Technology
• /
• 제7권5호
• /
• pp.274-282
• /
• 2008

Ships' hull is typically protected by a combination of protective coating system and electrical cathodic protection system, which has been an economical and effective measure for ship's hull to date. However, ships' rudder and adjacent hull areas are known to be subjected to premature corrosion damages, which require more frequent coating repair than other hull areas. Conventional organic coating system for ship's hull has been known only to remain intact just for 2~3 months on the rudder and adjacent area, especially for the fast-going ships such as container carriers or naval vessels. In this study, special organic/inorganic coating materials, which are commercially available, were tested in terms of cavitation resistance as an alternative to existing rudder & hull protection system. Both standard ultrasonic tester and in-house developed ultra water jet test method were employed as a means to evaluate their performance against cavitation induced damages. Additionally, the overall cost evaluation and workability at actual shipyard were discussed.

• The Journal of the Acoustical Society of Korea
• /
• 제17권1E호
• /
• pp.44-53
• /
• 1998

Bolt degradation has become a major issue in the nuclear industry since the 1980's due to failure during operation. If small cracks in stud bolt are not detected early enough, they grow rapidly and cause catastrophic disasters. Their detection, despite its importance, is known to be a very difficult problem due to the complicated structures of the stud bolts. This paper presents a method of detecting and sizing a small crack in the root between two adjacent crests in threads. The key idea is from the fact that the Rayleigh wave propagates slowly along a crack from the tip to the opening and is reflected from the opening mouth. When there exists a crack, a small delayed pulse due to the Rayleigh wave is detected between large regularly spaced pulses from the thread. The delay time is the same as the propagation delay time of the slow Rayleigh wave and is proportional to the size of the crack. To efficiently detect the slow Rayleigh wave, three methods based on digital signal processing are proposed : modified wave shaping, dynamic predictive deconvolution, and dynamic predictive deconvolution combined with wave shaping.

• 한국재료학회지
• /
• 제19권3호
• /
• pp.156-162
• /
• 2009

Lubricant-based nanofluids were prepared by dispersing carbon nanoparticles in gear oil. In this study, the effects of the particle size, shape and dispersity of the particles on the tribological properties of nanofluids were investigated. Dispersion experiments were conducted with a high-speed bead mill and an ultrasonic homogenizer, and the surfaces of the nanoparticles were simultaneously modified with several dispersants. The effective thermal conductivity of the nanofluids was measured by the transient hot-wire method, and the tribological behaviors of the nanofluids were also investigated with a disk-on-disk tribo-tester. The results of this study clearly showed that the combination of the nanoparticles, the deagglomeration process, the dispersant and the dispersion solvent is very important for the dispersity and tribological properties of nanofluids. Lubricant-based nanofluids showed relatively low thermal conductivity enhancement, but they were highly effective in decreasing the frictional heat that was generated. For nanofluids containing 0.1vol.% graphite particles in an oil lubricant, The friction coefficient in the boundary and fluid lubrication range was reduced to approximately 70% of the original value of pure lubricant.

• Journal of Welding and Joining
• /
• 제31권4호
• /
• pp.73-79
• /
• 2013

Burr grinding, Tungsten Inert Gas (TIG) dressing, ultrasonic impact treatment, and peening are used to improve fatigue life in steel structures. These methods improve the fatigue life of weld joints by hardening the weld toe, by improving the bead shape, and by creating the compressive residual stress. In this study, a new post-weld treatment method improving the weld bead shape and metal structure at the welding zone using Friction Stir Processing (FSP), a welding process, is proposed to enhance fatigue life. For that, a pin-shaped tool and processing condition employing Friction Stir Processing (FSP) is established through experiments. Experimental results revealed that fatigue life is improved by around 50% compared to as-welded fatigue specimens by reducing the stress concentration at the weld toe and by generating a metal structure finer than that of flux-cored arc welding (FCAW).

• 디지털산업정보학회논문지
• /
• 제10권1호
• /
• pp.73-79
• /
• 2014

In this study, the unmanned vehicle to develop a preliminary step, we were facilities for Automated Guided Vehicle (AGV) simulator is designed and implemented. Industry is increasingly the more advanced automation and management systems need to be efficient. These studies are at least 24-hour continuous unmanned vehicles and personnel can result in reduction of labor costs. In addition, safety accidents can be minimized in the industry as an effect of intelligent AGV is essential. This study is the initial step for the development of AGV. manufactured simulator to Simulation and drives the performance of the system is evaluated. The configuration of the simulator, ultrasonic sensors, infrared sensors, and using the obstacle were to follow a given path. In addition, two-way communication between the host computer and the main processor that was. communication method that IEE802.11 meets the standard is applied to high-speed wireless LAN systems, each of the sensor information is calculated. AGV having a drive shaft 4 of the four wheels are respectively independent structure. AGV's main processor is driven using a high-performance DSP, and the controller controls the steering device of the load could be significantly reduced.

• 대한의용생체공학회:의공학회지
• /
• 제30권3호
• /
• pp.233-240
• /
• 2009

Using a spatial compound imaging technique in a medical ultrasound imaging system, the average speed of sound in a medium of interest is measured, and imaging of its distribution is implemented. When the brightness reaches the highest level in an ultrasonic image obtained as the speed of sound used in focusing is varied, it turns out that the focusing has been accomplished satisfactorily and that the speed of sound which has been adopted becomes the sought-after average speed of sound. Because spatial compound imaging provides many different views of the same object, the adverse effect of erroneous speed-of-sound estimation tends to be more severe in compound imaging than in plain B-mode imaging. Thus, in compound imaging, the average speed of sound even in the case of speckled images can be accurately estimated by observing the brightness change due to different speeds of sound employed. Using this new method that offers spatial diversity, we can construct an image of the speed of sound distribution in a phantom embedded with a 10-mm diameter plastic cylinder whose speed of sound is different from that of the background. The speed of sound in the cylinder is found to be different from that of the surrounding medium.

• Composites Research
• /
• 제18권3호
• /
• pp.1-6
• /
• 2005

탄소나노섬유는 기계적, 전기적, 화학적, 열적 성질 등의 우수하고, 독특한 특성을 가진다. 이러한 탄소나노섬유의 우수한 물성에도 불구하고, 탄소나노섬유가 강화된 고분자 복합재료의 물성은 비례적으로 증가하지 않는다. 이러한 원인은 탄소나노섬유가 고분자 재료 내에 고루 분산되지 못하기 때문이다. 본 연구에서는 복합재료의 기계적 물성을 향상시키기 위해, 탄소나노섬유가 강화된 하이브리드 복합재료에 대한 연구를 수행하였다. 탄소나노섬유의 고른 분산을 위해, 초음파 분산장치를 이용한 용융 혼합방법을 이용하였고, 전자현미경(SEM)을 통해 탄소나노섬유의 분산정도를 확인하였으며, 만능시험기(UTM)를 이용하여 탄소나노섬유가 강화된 하이브리드 복합재료의 기계적 물성을 평가하였다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2006년도 하계종합학술대회
• /
• pp.923-924
• /
• 2006

In this paper, we propose the sensor fusing method for the obstacle avoidance of guiding robot for the visually impaired In our system, we acquire obstacles distances information using ultrasonic sensors, and its width is acquired by image sensor. We also compute avoidance angle using are distance and width information gained by sensor. After the robot avoid the obstacle by computed angle, the robot returns to its original path using odometry. The robot consists of the SA1110-based controller, sensory part using sonar array and image sensor, and motion part using differential drive for climbing stairs. This system use the embedded linux for OS, and also is developed by the QT/Embedded for GUI.

• 대한화학회지
• /
• 제34권6호
• /
• pp.555-560
• /
• 1990

$YBa_2Cu_3O_{7-x}$ 초전도 필름을 초음파에 의한 aerosol spray 법을 이용하여 YSZ (yttria stabilized zirconia) 및 SrTi$O_3$의 (100) 결정면 위에 만들었다. 초전도상은 세 단계의 과정을 거쳐서 형성되었다 : (가) 이트륨, 바륨, 구리의 질산염을 화학 양론비로 섞어 만든 용액을 250$^{\circ}C$로 가열된 기질에 분무하여, (나) 형성된 필름을 공기 중에서 550$^{\circ}C$로 예열하고, (다) 흐르는 산소 분위기에서 950$^{\circ}C$로 소결한 뒤 노냉하였다. 필름의 저하을 dc four-point probe 법으로 측정하여 액체질소 온도 이상에서 초전도성을 확인하였다.