• Journal of Biomedical Engineering Research
• /
• v.17 no.3
• /
• pp.365-372
• /
• 1996

The researches to acquire diagnostic parameters from ultrasonic images are advanced with the progress of the digital image processing technique. Especially, the detection of endocardial boundary is very important in ultrasonic images, because endocardial boundary is used as a clinical parameter to estimate both the cardiac area and the variation of cardiac volume. Various methods to detect cardiac boundary are proposed, but these are insufficient to detect boundary. In this paper, an algorithm that detects the endocardial boundary, expanding the cavity region from the center using statistical information, is proposed The value of mean and sty:nd, wd deviation in cavity region is lower than those in muscle re- gion. Therefore, if we define the multiplication of mean and standard deviation as homogeneous coefficient, it can lead to conclusion that the pixels with small variation of these coefficleno are cavity region, and extraction of endocardial boundary from cavity region is possible. The proposed method detected endocardial boundary more effectively than edge based or threshold based method and is robuster to noise than radial searching method that has high dependency for center position.

• Journal of Acupuncture Research
• /
• v.33 no.3
• /
• pp.17-28
• /
• 2016

Objectives : This study was designed to investigate the analgesic effects of Taxus cuspidata pharmacopuncture(TCP) at KI03 on formalin-induced pain in rats and to evaluate the efficiency of different extraction methods of Taxus cuspidata(TC). Methods : 30 rats were divided into 5 groups, each consisting of 6 rats. Each of the groups was treated two times. The first treatment for its right KI03 was as follows: rats were treated with normal saline(NOR), normal saline(CON), hot-water extraction of TC(W), ethanol extraction of TC(E), and ultrasonification extraction of TC(U). The second treatment was given 35 mins after the first one. Rats in NOR were treated with normal saline at their hind-paw. All groups, except NOR, were treated with formalin(5 %, $40{\mu}{\ell}$) at their hind-paw. To evaluate pain behavior, Ultrasonic vocalization(USV) was examined to be around 18~30 kHz. After analysis of USV, blood samples were taken from the rats for analysis of Substance P, aspartate aminotransferase(AST) and alanine aminotransferase(ALT). Results : In the experimental groups, USV was significantly decreased compared with CON and similar to that of NOR in the early phase. But there were no significant differences among the three extraction methods of TC. In addition, Substance P of W was significantly decreased. AST and ALT activation showed no significant differences among the 5 groups. Conclusion : These results show that regardless of extraction methods of TC, TCP at KI03 has analgesic effects in the early phase on formalin-induced pain in rats. In particular, hot-water extraction of TC significantly reduces Substance P activation.

• Journal of Institute of Control, Robotics and Systems
• /
• v.10 no.9
• /
• pp.779-784
• /
• 2004

This paper describes a sonic polygonal multiple reflection range sensor (SPMRS), which uses multiple reflection properties usually ignored in ultrasonic sensors as disturbances or noises. Targets such as a plane, corner, edge, or cylinder in indoor environments can easily be detected by the multiple reflection patterns obtained with a SPMRS system. Target classification and feature data extraction, such as distance and azimuth to the target, are computed simultaneously by considering the geometrical relationships between the detected targets, and finally the environment model is generated by refining the detected targets. In addition, the narrow field of view of a sonar range sensor is increased and the scanning time is reduced by active motion of the SPMRS stepping servomechanism.

• Journal of the Korean Society for Precision Engineering
• /
• v.16 no.8
• /
• pp.170-177
• /
• 1999

과공정 알루미늄 실리콘 합금 (Hypereutectic Al-Si Alloy, A390)은 내마멸성 및 우수한 강성에 의해서 자동차 부품에 많이 사용되고 있다. 본 연구에서는 초음파 진동 절삭에 의한 과공정 알루미늄 실리콘 합금의 가공성과 실리콘 석출의 실험적 연구를 수행 하였다. 최적 공구와 가공조건의 선정 실험을 통하여 보다 효과적인 초음파 진동 절삭을 수행하였으며, 과공정 알루미늄 실리콘 합금의 가공 표면거칠기와 실리콘 석출은 절삭속도와 절삭깊이와 밀접한 연관성을 갖고 있다.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2014.10a
• /
• pp.550-554
• /
• 2014

Regarding thin films in MEMS/NEMS structures, the exact evaluation of mechanical properties is very essential to enhance the reliability of their design and manufacturing. However, such methods as a tensile test and a resonance test, general methods to measure elastic moduli, cannot be applied to thin films since its thickness is so small. This work concerns guided wave based elastic modulus measurement method. To this end, guided wave excitation and detection system using a pulsed laser and a laser interferometry has been established. Also an elastic modulus extraction algorithm from the measured guided wave signal was developed. Finally, it was applied to actual thin film structures such as Ni-Si and Al-Si multilayers. From experimental results, we confirm that the proposed method has considerable feasibility to measure elastic properties of thin films.

• The KSFM Journal of Fluid Machinery
• /
• v.12 no.4
• /
• pp.54-62
• /
• 2009

The feedwater heaters are Critical components in a nuclear power plant. As the operation years of heaters go by, the maintenance costs required for continuous operation increase. When the carbon steel components in nuclear make contact with running fluid, the wall thinning caused by FAC (flow accelerated corrosion) can be generated. Local wall thinning is inevitable at the area around wet steam entrance to be attacked due to the long term operation. Sometimes the shell with thinned wall is eventually ruptured. To identify the relationship between the local wall thinning and fluid behavior of the feedwater heater, the practical data of a plant, which were based on ultrasonic thickness measurement tests, were analyzed and CFD(Computed Fluid Dynamics) analyses were performed.

• Proceedings of the KIEE Conference
• /
• 2003.11c
• /
• pp.830-835
• /
• 2003

This paper describes a sonic polygonal multiple reflection range sensor (SPMRS), which uses multiple reflection properties usually ignored in ultrasonic sensors as disturbances or noises. Targets such as a plane, corner, edge, or cylinder in indoor environments can easily be detected by the multiple reflection patterns obtained with a SPMRS system. Target classification and feature data extraction, such as distance and azimuth to the target, are computed simultaneously by considering the geometrical relationships between the detected targets, and finally the environment model is generated by refining the detected targets. In addition, the narrow field of view of a sonar range sensor is increased and the scanning time is reduced by active motion of the SPMRS stepping servomechanism.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.20 no.4
• /
• pp.1309-1319
• /
• 1996

The research for the classification of the natural defects in welding zone is performd using the neuro-pattern recognition technology. The signal pattern recognition package including the user's defined function is developed to perform the digital signal processing, feature extraction, feature selection and classifier selection, The neural network classifier and the statistical classifiers such as the linear discriminant function classifier and the empirical Bayesian calssifier are compared and discussed. The neuro-pattern recognition technique is applied to the classificaiton of such natural defects as root crack, incomplete penetration, lack of fusion, slag inclusion, porosity, etc. If appropriately learned, the neural network classifier is concluded to be better than the statistical classifiers in the classification of the natural welding defects.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.10
• /
• pp.4927-4935
• /
• 2012

Turmeric is a medicinal herb with various pharmacological activities. Curcumin, demethoxycurcumin(DMC) and bisdemethoxycurcumin(BDMC) were extracted from turmeric by dipping and ultrasonic wave method. And extraction efficiency was identified using solid phase extraction(SPE). The extracted sample were simultaneously separated and analyzed from three kinds of commercial $C_{18}$ reversed-phase high performance liquid chromatography using water and acetonitrile as mobile phase with isocratic elution mode. Flow rate 1.0mL/min, injection volume $10{\mu}L$ and column oven temperature $40^{\circ}C$ at 425nm wavelength has been conducted. From the experimental results, the optimum mobile phase composition of water/acetonitrile 50/50vol% using RS tech column. It is evident that the amount of curcuminoids extracted(extraction time 4h) by 100% MeOH was higher than any aqueous MeOH composition. Finally, in 100% water extraction, the amount(mAU${\times}$mim) of curcuminoids extracted by SPE was 14.3 and 24.5 times respectively higher than ultrasonic wave and dipping method. The shown results can be applied as sources for pharmaceuticals and functional material.

• Journal of Life Science
• /
• v.21 no.1
• /
• pp.56-61
• /
• 2011

This study was performed to investigate effective extract conditions in fronds of the Ostrich fern (Matteuccia struthiopteris) to increase antioxidant compound contents and antioxidant capacity. Powder (1 g) of lyophilizated fronds were mixed with 3 kinds of solvents (MeOH, 80% EtOH and water). Extractions were carried out using not only immersion (room temp.), heating ($60^{\circ}C$) and stirring (200rpm) for 6 hr, but also through sonication in a 42 kHz ultrasonic bath for 15, 30 and 45 min. Extracts were filtrated and measured for contents of soluble solids (SS), total polyphenols (TP; tannic acid as a standard) and total flavonoids (TF; Naringin as a standard). Antioxidant activity was expressed as $RC_{50}$ for DPPH and ABTS radical scavenging. SS (0.317 $g{\cdot}g^{-1}$ db), TP (70.90 $mg{\cdot}g^{-1}$ db) and TF (41.53 $mg{\cdot}g^{-1}$ db) contents reached their highest levels when 30 minute sonication extraction with 80% EtOH was performed, and the highest DPPH and ABTS scavenging activity was observed in the same extraction conditions ($RC_{50}$=0.14 $mg{\cdot}ml^{-1}$ and 0.09 $mg{\cdot}ml^{-1}$, respectively). From the present investigation, it can be concluded that fronds of the ostrich fern can be used as a natural material for antioxidants, and sonication for 15-30 min with 80% EtOH is an ideal extraction method for increasing their antioxidant effects and saving extraction time.