• 제목/요약/키워드: Ultrasonic cleaner

검색결과 43건 처리시간 0.034초

시멘트 혼합토의 내구성 평가법에 관한 연구 (A Study on Durability Test of Cemented Soils)

  • 박성식;황세훈
    • 한국지반공학회논문집
    • /
    • 제28권11호
    • /
    • pp.79-86
    • /
    • 2012
  • 최근 소량의 시멘트를 혼합한 고결토가 도로 보조기층, 뒤채움재, 가물막이 댐 등 각종 토목 현장에서 많이 사용되고 있다. 이와 같이 시멘트비가 낮은 고결토는 반복되는 건습이나 다양한 풍화작용에 의해 내구성이 저하될 수 있다. 하지만 암석과 달리 고결토의 내구성을 평가하는 방법에 대한 연구는 부족한 실정이다. 따라서 본 연구에서는 기존의 슬레이크 내구성시험과 초음파 세척기를 이용하여 시멘트가 혼합된 고결토의 내구성을 평가하기 위한 시험법을 개발하고자 하였다. 고결모래의 시멘트비(4, 6, 8, 12%)를 달리하여 원기둥 형태의 공시체를 제작한 다음 수중 또는 대기중에서 3일 동안 양생하였다. 3일 양생 후 건조로에서 1일 동안 건조시킨 다음 다시 1일 동안 수침 시킨 후 슬레이크 내구성시험 및 초음파 세척기를 10분 또는 20분 동안 작동하여 시험 전후의 중량 손실 정도를 계산하여 내구성을 평가하였다. 시멘트비가 4%로 상당히 낮은 경우 고결모래의 중량 손실률은 7-25%인 초음파 세척기 시험법에 비해 슬레이크 내구성시험은 30-60%로 상대적으로 높았으나, 시멘트비가 8% 이상인 경우에는 두 시험방법 모두 중량 손실률이 10% 이내로 큰 차이가 없었다. 내구성지수는 시멘트비가 증가할수록 증가하였으며, 대기중 양생한 공시체보다 수중 양생한 공시체의 내구성지수가 높았다. 시멘트비가 낮은 고결토의 내구성을 평가하기에는 중량 손실이 많은 슬레이크 내구성시험보다 본 연구에서 새롭게 제안한 초음파 세척기를 이용한 시험법이 효과적임을 알 수 있었다.

콘택트렌즈 관리방법에 의한 실리콘하이드로겔렌즈의 지방침전물 제거효과 (Evaluation of Contact Lens Care Regimens in Removing Tear Lipids on Silicone Hydrogel Lens)

  • 강유선;이군자;주은희
    • 한국안광학회지
    • /
    • 제15권4호
    • /
    • pp.347-353
    • /
    • 2010
  • 목적: 소프트콘택트렌즈 관리용액에 의한 balafilcon A 재질의 실리콘 하이드로겔렌즈에 부착된 지방 침전물 제거효과를 비교하였다. 방법: Balafilcon A 재질의 실리콘 하이드로겔렌즈를 실험실 조건에서 oleic acid, oleic acid methyl ester, cholesterol이 포함된 식염수에 담가 24시간 동안 오염시켰다. 오염된 콘택트렌즈는 식염수로 헹구어준 후 계면활성세척액, 알콜 성분이 포함된 세척액 및 다목적용액으로 각각 세척하였고, 반복적인 오염과 세척효과를 관찰하기 위해서는 오염과 세척과정을 14회 반복하였다. 초음파의 지방침전물 세척 효과를 관찰하기 위하여 오염된 렌즈에 초음파처리를 한 후 처리하지 않은 렌즈와 비교하였다. 지방침전물은 methanol:chloroform (1:1, v/v) 용액으로 추출하고 고성능액체크로마토그래피로 분석하여 정량하였다. 결과: 실리콘 하이드로겔렌즈의 지방세척효과는 알콜성분을 함유한 세척액이 계면활성세척액 및 다목적용액보다 높았으며, 초음파를 함께 처리해준 경우에는 세척 효과가 상승하였다. 콘택트렌즈 관리용액으로 세척한 후에도 지방침전물은 완전히 제거되지 않아 오염과 세척을 반복한 경우 지방 침전물의 양은 지속적으로 증가하였다. 결론: 실리콘 하이드로겔렌즈에 부착되는 지방 침전물에 대한 소프트 콘택트렌즈용 관리용액의 세척효과는 만족할 수준에 미치지 못하기 때문에 실리콘 하이드로겔렌즈의 지방 침전물 제거에 적합한 세척액의 개발이 필요할 것으로 사료된다.

초음파 세척기를 이용한 사과의 잔류농약 제거 효과 (Removal Efficiency of Pesticide Residues on Apples by Ultrasonic Cleaner)

  • 윤채혁;박우철;김장억;김충효
    • 한국환경농학회지
    • /
    • 제16권3호
    • /
    • pp.255-258
    • /
    • 1997
  • 초음파 세척기를 이용한 과일의 잔류농약 제거율을 알아보기 위해 사과를 3종의 유기인계 농약(Fenitrothion, Chlorpyrifos, Phethoate)에 침지한 다음 물, 30% Ethanol, 0.2% 합성세제를 세척용매로 하여 초음파 처리 시간별로 잔류농약 젝율을 조사한 결과는 다음과 같다. 물을 세척용매로 사용하였을때 잔류농약 제거율은 초기 30초대에 Fenitrothion 39.2%, Chlorpyrifos 32.0%, Phenthoate 50.4% 이었으나, 초음파 세척시간이 증가하여도 잔류농약 제거율은 감소하는 경향을 나타내었다. 합성세제를 세척용매로 사용하였을 때의 잔류농약 제거율은 5분대에서 Fenitrothion 33.5%, Chlorpyrifos 30.1%, Phenthoate 48.3% 이었으며, 30% Ethanol의 경우는 Fenitrothion이 15분대에서 66.2%, Chlorpyrifos, Phenthoate는 10분대에서 각각 41.7%, 74.2%로 3가지 세척용매 중에서 가장 우수한 것으로 나타났다. 결과적으로 30% Ethanol을 용매로 하여 $10{\sim}15$분간 초음파로 세척하는 것이 가장 효과가 좋은 세척방법이라고 하겠다.

  • PDF

샤워형 초음파 장치를 이용한 농약 제거 효율에 관한 연구 (Study on the elimination of agricultural chemicals using shower type ultrasonic cleaner)

  • 조승인;허웅;김정국
    • 대한기계학회:학술대회논문집
    • /
    • 대한기계학회 2003년도 추계학술대회
    • /
    • pp.905-909
    • /
    • 2003
  • This paper describes a shower type ultrasonic cleaning system using particle acceleration, developed for better effectiveness in washing out agricultural chemicals from fruits or vegetables, compared to the existing bath type ultrasonic cleaning system. The shower type system consists of a signal generator, a transducer, and a spouting nozzle, mainly. The system has been tested based on the method recommended by Korea Food and Drug Administration. It is found that shower type system shows better performance and cost-effectiveness than the bath type system that is commercially available .

  • PDF

음선 기법을 이용한 초음파 음장 해석 (Ultrasonic Field Analysis Using a Sound-Ray Method)

  • 문병환;김진오
    • 한국소음진동공학회:학술대회논문집
    • /
    • 한국소음진동공학회 2001년도 추계학술대회논문집 II
    • /
    • pp.1329-1334
    • /
    • 2001
  • This paper deals with the application of a sound-ray method to the analysis of the sound field in an ultrasonic cleaner. In order to include the wave interference phenomenon, the method has been modified to consider the phase of sound rays, The improved algorithm has been implemented by developing a Visual C++ program, The algorithm has been verified by comparing the analysis results of BEM reported earlier. It has been shown that the algorithm can be used to calculate ultrasonic fields in a cleaning- container with an object to be cleaned.

  • PDF

광중합형 프린터로 제작한 임시 의치용 인공치아의 UV형 초음파 세척에 따른 선형측정 평가 (Linear measurement evaluation according to UV-type ultrasonic cleaning of artificial teeth for temporary dentures manufactured using a light-curing type printer produced by a DLP printer)

  • 김동연;이광영
    • 대한치과기공학회지
    • /
    • 제46권1호
    • /
    • pp.8-14
    • /
    • 2024
  • Purpose: This study compares the deformation of traditional resin dentures to resin dentures printed with digital light processing (DLP). Methods: Eleven edentulous research models were developed. Ten of them were made with traditional resin dentures. The remaining one was prepared for scanning and 3D (three-dimensional) printing. Ten traditional resin dentures were made, with the remaining artificial teeth created using 3D software and a DLP printer. Traditional resin dentures, 3D printed resin denture artificial teeth, and a denture base with artificial teeth were all cleaned simultaneously in an ultrasonic cleaner for 3 minutes. Three groups were assigned four artificial tooth measurement points, which were then measured with digital calipers. The measured data was analyzed using descriptive statistics. The significance test was conducted using a nonparametric test Kruskal-Wallis test due to the small number of specimens (α=0.05). Results: The traditional resin dentures had the lowest strain rate at -0.04%, while the group that manufactured only artificial teeth had the highest strain rate at -0.09%. However, no statistically significant difference was observed between the 3 groups (p>0.05). Conclusion: During ultraviolet-type ultrasonic cleaning, traditional resin dentures (TD group) and denture base with artificial teeth made of DLP (DD group) demonstrated stable durability, whereas the artificial teeth made of DLP (AD group) with only artificial teeth did not show a good deformation rate.

Improved Cleaning Method for Dental Instruments

  • Kim, In-Geol;Lee, Yun-Ji
    • Journal of Korean Dental Science
    • /
    • 제3권2호
    • /
    • pp.26-33
    • /
    • 2010
  • We searched at the "PubMed.gov" and "jendodon.com" sites to conduct a literature review on dental instruments that are reused in clinical settings and on infection control involving pre-disinfection or sterilization cleaning/rinsing. The keyword "dental clean" was used for the Web search. We found the present official definition of instrument cleaning performed prior to disinfection or sterilization rather limiting ("removal of foreign matter (soil, organism, etc.) from the instruments"). Thus, we proposed to expand the definition to include the removal of oils applied to protect the metallic instruments and from corrosion, stains, and rust resulting from the frequent reuse of the instruments. Clinicians are found to clean their dental instruments (a) immediately after treating their patients or (b) following their treatment but not immediately afterward. In the latter case, we recommend presoaking to be added. Ultrasonic sterilization of 5~15 minutes is found to be more effective in terms of eliminating residual matter from the instruments compared to other methods. To check on the cleaning results, we recommend visual inspection, which can be quick and practical in clinical settings. The latest products being developed and marketed on the market address the related problems. Nonetheless, research must be continued on the effects of presoak, cleaning/rinsing, disinfection, and high-temperature or heating-based sterilization on the dental instruments and on dental clinicians' practices in cleaning, disinfection, and sterilization. We advise dental clinicians to select the proper cleaning methods and detergents for their instruments to help eliminate or prevent corrosion, staining, and rusting, to reduce the maintenance costs, and to ensure user-friendly instruments/apparatuses.

  • PDF

소형 금속방사성폐기물 제염장치 개발 : 자기장 연삭핀과 초음파 세정기의 응용 (Smart Decontamination Device for Small-size Radioactive Scrap Metal Waste : Using Abrasion pin in Rotating Magnetic Field and Ultrasonic Wave Cleaner)

  • 홍용호;박수리;한상욱;김병직
    • 방사성폐기물학회지
    • /
    • 제12권1호
    • /
    • pp.79-88
    • /
    • 2014
  • 원자력이용시설에서 발생한 작은 크기의 금속 조각들을 효과적으로 제염하는 스마트 장치를 개발하였다. 이 장치는 자성연마재를 포함한 영역의 자속밀도를 연속적으로 변화시키는 방법과 초음파를 이용하는 다중 제염장치이다. 한편, 제염 효율을 높이기 위해 제염 장치가 제염 대상 전체에 작용하도록 장치들의 구성을 수정하였다. 개발된 장치들의 최적 작동조건을 도출하여 샘플로 선정한 소형의 금속방사성페기물에 대하여 자기장과 초음파제염을 각각 15분간 실시하였다. 그 결과 제염계수의 범위는18~56으로 크게 향상되었으며 제염 후 모든 샘플은 백그라운드(BKG)값 이하로 확인되었다.

Bath-type 초음파(超音波) 세척기(洗滌器)를 이용(利用)한 태양전지모듈 접착제(接着劑) EVA(Ethylene Vinyl Acetate) 분해특성(分解特性) (Decomposition of EVA(Ethylene vinyl acetate) used as an adhesion of photovoltaic(PV) module by ultrasonic irradiation in bath-type cleaner)

  • 김영진;이재영
    • 자원리싸이클링
    • /
    • 제20권6호
    • /
    • pp.50-55
    • /
    • 2011
  • 태양전지(Photovoltaic, PV) 모듈의 층간 접착제로 사용된 EVA(Ethylene Vinyl Acetate)를 초음파 조사(irradiation)를 이용하여, 선택적으로 분해함으로써 모듈 내 실리콘웨이퍼(Si-wafer)로 제조된 셀(cell)을 분리, 회수하는 연구를 진행하였다. 본 실험에 사용한 초음파 발생장치는 bath-type의 초음파 세척기 (Output: 130 W, Frequency: 40 kHz)로, PV모듈과의 거리는 2 cm로 고정하고 유기용매 종류, 농도, 온도를 조절하면서 EVA 분해 및 셀의 분리 최적 조건을 도출하였다. $55^{\circ}C$, 5M인 조건에서는 용매 종류에 상관없이 160 min 이내에 EVA층의 완전 분해는 가능하였으나, 분해과정 중 발현되는 팽창현상(swelling)에 의해 셀의 일부분이 파손된 상태로 회수되었다. 반면에 $65^{\circ}C$, 5M조건에서는 셀의 파손이 억제된 상태로 회수 가능하였으며, 이는 온도 상승에 의해 EVA 성분의 분해속도가 상승되고, 이로 인해 EVA층의 팽창현상이 발현되기 전에 분해가 일어난 결과라고 판단된다.

A Study on Optimization of Megasonic Cleaning Process for Manufacturing LCD

  • Kim, Young-Sook;Kim, Hie-Sik;Park, Gi-Sang
    • 제어로봇시스템학회:학술대회논문집
    • /
    • 제어로봇시스템학회 2001년도 ICCAS
    • /
    • pp.97.4-97
    • /
    • 2001
  • Recently, TFT LCD (thin film transistor liquid crystal display) manufacturing industry is more concerned with the ways of cleaning large TFT LCD´s with high pixed density than ever Ultrasonic cleaners with high frequencies like 1MHz (megasonic cleaners) are effective in removing very small particles without causing mechanical damage to the surface. In this study a megasonic cleaner for TFT LCD manufacturing process is developed and the performance is evaluated through experiments. The experimental results show that the developed magasonic cleaners is effective in removing very small particle from the LCD panel.

  • PDF