• 대한치과기공학회지
• /
• 제43권3호
• /
• pp.84-92
• /
• 2021

Purpose: The purpose of this study was to compare the dimension safety evaluation between a general ultrasonic cleaner and an ultrasonic cleaner equipped with UV-C (ultraviolet-C). Methods: An edentulous model was prepared. A denture base and an occlusal rim were fabricated, and scanning was performed. After scanning, a denture base and full arch artificial teeth were designed. The full arch artificial teeth were printed using a three-dimensional printer (n=10). The residual resin was washed with alcohol and then scanned (reference data). The printed specimens were classified and cleaned using a general ultrasonic cleaner (GU group) and an ultrasonic cleaner equipped with UV-C (UC group). After each washing, a rescan was performed (scan data). Reference data and scan data were superimposed using overlapping software. Data were statistically analyzed using the Mann-Whitney test (α=0.05). Results: In the deviation values of full arch artificial teeth, the GU group showed a high deviation of 18.02 ㎛ and the UC group showed a low deviation of 15.02 ㎛. The two groups demonstrated a statistically significant difference (p<0.05). Conclusion: Full arch artificial teeth prepared using photopolymerized resin were deformed according to the temperature of water generated in the ultrasonic cleaner. It is judged that there is no deformation according to the UV-C ultrasonic cleaner.

• 복식문화연구
• /
• 제11권6호
• /
• pp.956-966
• /
• 2003

The purpose of study is to find out a suitable cleaning method for excavated textiles of Jeon-ui Lee(1570∼1647). The textiles were excavated from her tomb in 1997, and her descendents put them in a box without any treatment and kept them in the warehouse since then. We used two kinds of silk as samples, non-dyed and dyed textile. The experiment was performed by 8 kinds of wet cleaning and dry cleaning methods, an ultrasonic cleaner was used in the wet cleaning, decane and perchloroethylene were used as solvents in the dry cleaning. The use of the ultrasonic cleaner in the wet cleaning method did not show any damage to the fibers of the textiles and it not only cleaned well but also was safe for the fugitive dyes. It resulted in more effective cleaning when the detergent was used together. Therefore, it is effective to use the ultrasonic cleaning on the delicate historical textiles and helpful to the operator's safety and environment.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• 제9권4호
• /
• pp.321-326
• /
• 2009

The mobile air cleaner analyzes a distribution of polluted air to purify the air fast, calculates an optimal position and moves the position so that it can remove indoor dust more quickly. At this time, the self-localization is necessary to make the mobile air cleaner move accurately to the calculated position. This paper proposed a self-localization algorithm having high accuracy without complicated calculation and implemented it by combining a ultrasonic sensor and video processing technologies, so that it is suitable for a mobile air cleaner, and as a test result, the mean error of $\pm1cm$ appeared between the actually measured position and the calculated position.

• 복식
• /
• 제54권1호
• /
• pp.1-10
• /
• 2004

The purpose of this study was to compare the efficiency of four different cleaning method of silk and to fabrics, which were excavated from the sixteenth century tombs. The four cleaning methods were hand washing in water and hand washing in solvent, washing in ultrasonic cleaner, and using of ultrasonic gun after washing in ultrasonic cleaner. The following is the result of the experiment: ㆍBoth silk and jute fabrics shrank the most after hand-wash in water. This cleaning method decreased their thickness the most but changed their strength the least. However, the color of the fabric changed the most after had-wash in water. This washing method might discolor the dyed fabric, so one must check the condition of the fabric thoroughly before washing it. ㆍThe weight and the thickness of the fabric changed little after ultrasonic cleaning. This cleaning method, therefore. is less efficient than hand-water-wash. The use of ultrasonic gun after ultrasonic wash for partial cleansing enhanced the efficiency a little. Nevertheless, this method left stain around the area where the gun was used, and the injected water could damage the fabric. ㆍThe excavated fabric became softer in the cleaning process as the dirt was washed away. In both cases of silk and jute fabrics cleaning, solvent made the fabric softer than water. Washed in solvent, the fabric did not swell. But water penetrated to the fiber during the cleaning process and made the fabric swell. When the water evaporates, the swollen fiber structure collapses and the fabric become stiff. Ultrasonic wash did not cause much change in the flexibility of the fabric, for this method does not remove the dirt as effectively as the other method.

• The Journal of the Acoustical Society of Korea
• /
• 제16권1E호
• /
• pp.49-56
• /
• 1997

Ultrasonic cleaning at high frequency around 1 MHz, called megasonic cleaning, is commonly used to remove particles less than 1 ㎛ by generating high frequency accelerations on the cleaning objects. Cleaning is performed in an ultrasonically-excited liquid contained in a double-structured container. Ultrasonic waves generated by piezoelectric transducers propagate in the outer container and are transmitted through the inner container. The bottom of the inner container is inclined to make oblique incidence of the ultrasonic wave in order to raise the efficiency of the transmission through the bottom plate. This work deals with the efficiency of the transmission, which directly affects the cleaning performance. The transmission characteristics of the ultrasonic wave in the megasonic cleaner have been obtained analytically and numerically for the variations of some parameters, such as the thickness and inclined angle of the bottom plate of the inner container and the chemical ratio and temperature of the cleaning liquid. The calculated results have yielded the optimum cleaning condition in terms of the sound power transmitted into the cleaning liquid.

• 한국전기전자재료학회논문지
• /
• 제36권2호
• /
• pp.191-196
• /
• 2023

In this paper, for the application of ultrasonic cleaners for cleaning dentures and transparent braces, Pb(Mn_1/3Nb_2/3)O₃-Pb(Ni_1/3 Nb_2/3)O₃-Pb(Zr,Ti)O₃ [PMN-PNN-PZT] system ceramics were manufactured and their dielectric and piezoelectric properties were investigated. Overall the best properties suitable for the device applications such as ultrasonic cleaner were obtained from the ceramics sintered at 920℃: bulk density of 7.8 g/cm³, the dielectric constant (ε_r) of 1,689, piezoelectric charge constant (d₃₃) of 433 pC/N, planar electromechanical coupling factor (k_p) of 0.64, mechanical quality factor (Qm) of 835, S₁₁^E of 13.37 (10^-12 N/m²), and Curie temperature of 315℃ By using the physical properties of this composition, the ultrasonic cleaner was designed and simulated using the commercial ATILA software. For the three-layered ceramics with the dimension of 25 mm × 25 mm × 2.5mm, an excellent displacement of 8.998 10^-3 m) and the sound pressure of 147.68 dB were recorded.

• 한국안광학회지
• /
• 제16권1호
• /
• pp.31-40
• /
• 2011

목적: 본 연구는 안경원에서의 안경용 초음파세척기를 이용한 소프트렌즈 세척 실태를 조사하고 세척용기를 달리하였을 때의 단백질 제거 효과를 비교하기 위하여 수행되었다. 방법: 서울시 소재 75개 안경원을 대상으로 소프트렌즈 세척 실태에 관한 설문조사를 실시하였다. 또한 인공누액을 사용하여 소프트렌즈에 인위적으로 단백질을 침착시킨 후 세척용기를 달리하여 안경용 초음파세척기로 세척한 후 단백질 잔존량을 측정함으로써 세척효율을 비교하였다. 또한 반복적인 초음파 세척으로 인한 소프트렌즈의 표면과 습윤성 변화를 분석하였다. 결과: 안경원에서 콘택트렌즈 세척에 안경용 초음파세척기를 이용하는 주목적은 신속함 때문임을 확인하였다. 세척용기로 플라스틱 렌즈 용기와 유리병 렌즈용기를 사용하고 안경용 초음파세척기로 소프트렌즈를 세척한 경우 유리병 렌즈용기를 사용하였을 때 세척효율이 높은 경향을 보였으나 유의성 있는 차이는 아니었다. 한편 반복적인 초음파 처리로 인하여 소프트렌즈의 표면과 습윤성의 변화가 나타남을 관찰할 수 있었다. 결론: 안경용 초음파세척기 이용 시 세척용기로 플라스틱 렌즈용기와 유리병 렌즈용기의 사용이 모두 효과적이었지만 반복적인 초음파 세척 시에는 세척용기를 사용하였다 하더라도 초음파로 인한 소프트렌즈의 변성이 우려되므로 주의를 기울여 사용하여야 것이다.

• 한국안광학회지
• /
• 제15권3호
• /
• pp.227-234
• /
• 2010

목적: 안경용 초음파세척기를 이용하여 소프트콘택트렌즈의 단백질 침전물 세척 효과와 콘택트렌즈의 변수에 미치는 영향을 조사하였다. 방법: 단백질을 오염시킨 etafilcon A 재질의 소프트콘택트렌즈를 다목적용액에 넣어 안경용 초음파세척기와 콘택트렌즈용 초음파세척기를 사용하여 세척하고 대조군의 콘택트렌즈는 다목적용액으로 세척한 후 콘택트렌즈에 남아있는 단백질을 추출하여 정량하였고 콘택트렌즈의 전체지름, 베이스커브, 중심두께, 도수 및 함수율의 변화를 측정하였으며 주사전자현미경(scanning electron microscope)으로 콘택트렌즈 표면을 관찰하였다. 결과: 단백질을 오염시킨 etafilcon A 재질의 콘택트렌즈는 다목적용액에 의해 6.08%의 세척효과를 보였고, 다목적용액에 콘택트렌즈를 넣고 초음파세척기로 세척한 경우에는 시간에 따라 안경용 초음파세척기에서는 23.73~33.92%, 콘택트렌즈용 초음파세척기에서는 0~12.99%의 세척효과를 보였다. 결론: 안경용 초음파세척기로 세척한 콘택트렌즈에서 변수 및 표면 변화는 관찰되지 않았다. 결론: 안경원에서 사용하는 안경용 초음파세척기는 소프트콘택트렌즈의 단백질 침전물 제거에 효과적이고 변수 변화를 유발하지 않아 안경원에서 진단용 소프트렌즈의 세척에 활용될 수 있을 것으로 사료된다.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2003년도 추계학술발표대회 논문집
• /
• pp.29-32
• /
• 2003

Multi -walled carbon nanotube(MWNT)/poly(methyl methacrylate) composites were fabricate d through film casting. Manufacturing process was established using a ultrasonic cleaner and a homogenizer. Acetone was used as a solvent to melt PMMA and mix with MWNT. The ultrasonic cleaner performed an important role in producing MWNT/MMA nanocomposites. Ultrasonic energy was utilized to disperse MWNT in acetone. Also, melting PMMA in acetone and mixing MWNT and PMMA were achieved using the homogenizer. It was confirmed that the nanohlbes were well dispersed in PMMA according to SEM images.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 1997년도 춘계학술대회논문집; 경주코오롱호텔; 22-23 May 1997
• /
• pp.656-661
• /
• 1997

Ultrasonic cleaning at high frequency near 1MHz, called megasonic cleaning, is commonly used to remove particles less than 1.mu.m by generating accelerations on them. Ultrasonic waves generated from piezoelectric transducers are transmitted through a non-metallic inner container which is used to isolate a cleaning object from metallic ions. The transmission characteristics of a double-structured megasonic cleaner on the variations of parameters such as the thickness and oblique angle of a inner container, chemical ratio of a cleaning agent and temperature and transmittivity are investigated. The results are used to determine an optimum cleaning condition.