• Composites Research
• /
• v.12 no.6
• /
• pp.74-82
• /
• 1999

The static and fatigue characteristics of polyurethane foam cored sandwich structures are investigated. Three types of the specimens with the glass fabric faces and the polyurethane foam core are used; non-stitched. stitched, and stiffened sandwich specimen. Especially additional structural reinforcements with the twisted polyester and glass fiber for thickness direction are made to stitched sandwich structure panel to minimize the delamination of structure which is stitched the upper and lower faces through the core and the resin is impregnated Into stitched fiber with the characteristics of low viscosity of resin at resin flow temperature and cured together with during the curing process. Bending strength of stitched specimen which is 50 mm $50{\times}50{\;}mm$ pitched is improved by 50 % as com-pared with non-stitched specimen and stiffened specimen is improved 10 times more than non-stitched structure. After fatigue testing of $10^6$cycles by 20% of ultimate load under monotonic load, the bending fatigue strength of non-stitched specimen is decreased by 27% of monotonic bending strength, 39% for stitched structure and 20% for stiffened specimen. To verify the aging effect of polyurethane form core, Ultrasonic C-scanning equipment is used to detect the damage of skin laminate alone after fatigue test. From results of UT C-scan images, there is no defect that can be damaged occurred during fatigue test. It is concluded that the decrease of bending strength for foam cored sandwich specimen is caused by the decrease of stiffness due to the aging of polyurethane foam core during fatigue cycles.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.32 no.2
• /
• pp.162-169
• /
• 2012

This study detected SCC defects of dissimilar metal welded(STS304 and SA106 Gr. b) pipes using the ultrasonic infrared thermography method and the lock-in image treatment method among infrared thermography method. The infrared excitement equipment has 250 Watt of output and 20 kHz of frequency. By using the ultrasound infrared thermography method, the internal defects of dissimilar metal weld joints of pipes used at nuclear power plants could get detected. By an actual PT test, it was observed that the cracks inside the pipe existed not as a single crack but rather as a multiple cracks within a certain area and generated a hot spot image of a broad area on the thermography image. In addition, UT technology could not easily defects detected by the width of $10\;{\mu}m$ fine hair cracks. but, ultrasound infrared thermography technique was defect detected.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.275-275
• /
• 2010

국제핵융합실험로 (ITER)의 블랑켓 일차벽 조달 자격 획득을 위한 검증시험을 수행하여 1단계를 2009년 완료하였고, 2단계는 2011년 예정으로 진행 중이다. 우리나라는 이미 1단계 검증시험에서 2 개의 일차벽 목업 (First Wall Qualification Mockup ; FWQM)을 제출하여 시험을 성공적으로 통과하였고, 2단계 검증 시험을 위해 semi-prototype 제작 기술 및 시험 기술을 개발 중이다. 블랑켓 일차벽 검증 시험 및 제작 기술을 확보하기 위한 고유접합법 개발을 위해서 표준 크기($80\;mm{\times}80\;mm$)의 목업을 제작하여 국내 고열부하 시험 시설에서 접합 방법의 타당성을 확인하였다. 표준목업은 HIP (Hot Isostatic Pressing) 접합법으로 stainless steel과 Cu 냉각부를 제작하고, 다시 $80\;mm{\times}80\;mm$ Be tile을 HIP 방법으로 냉각부에 접합하여 제작한다. 고유접합법 개발을 위해서 Be과 Cu 냉각부 계면에 Cr($1\;{\mu}m$)/Cu($10\;{\mu}m$), Ti($5\;{\mu}m$)/Cu($10\;{\mu}m$) 층을 코팅하여 Be 접합 성능을 개선하였으며, 기존의 접합 계면과 차별화된 기술을 확보하였다. 표준목업의 전체 크기는 $80\;mmW{\times}80\;mmL{\times}84\;mmH$ 이고, 1차로 총 6개, 2차로 4개를 제작하였으며 제작 과정 및 제작 전후에 파괴검사, 비파괴검사를 수행하여 접합의 건전성을 확인하였다. 제작 완료된 표준 목업은 냉각 관로를 장착하여 국내의 고열부하 시험시설인 KoHLT-1에 장착하여 성능 시험을 수행하였다. 고열부하 시험 시설의 냉각수 조건은, 온도 $25^{\circ}C$(실온), 유량 0.15 kg/sec이고, 고열 부하 조건에서는 0.5, 1.0, $1.5\;MW/m^2$의 screening 시험을 거친 후 1.5 MW/m2에서 cycle 시험을 진행하였다. 각 목업의 고열부하 시험을 마친 후 비파괴 검사의 일환으로 UT(Ultrasonic test) 시험을 수행하여 열부하 시험 전후의 목업 건전성을 확인하였다. 고유접합법을 이용하여 개발한 표준 목업의 고열부하 시험을 통해서 접합법의 타당성 및 건전성을 확인하였고, 향후 블랑켓일차벽 조달 검증 2단계 시험에서 semi-prototype 제작 및 고열부하 시험에 대비하고, ITER 관련 핵심 기술 개발 목표를 달성할 것이다.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.34 no.2
• /
• pp.176-183
• /
• 2014

Acoustic emission testing (AET) of cylinders is advantageous in that it can be directly conducted on cylinders installed in a car, without needing to dissemble them on a real-time basis. Therefore, users prefer AET over other nondestructive testing methods. Owing to these advantages of AET, it has been approved by the Department of Transportation of the U.S. as a safety evaluation method for pressure containers or as an alternative to the hydroproof testing method. This paper presents a study of the quantitative evaluation criteria for a container having ultrasonic testing defects and also for Type 1 and Type 2 gas cylinders, which are defective seamless pressure containers provided by NK, a manufacturer of pressure containers. For the Type 1 cylinder, the process from crack growth to leak was observed in a repetitive fatigue test using a 113 L container according to ASTM E 1419-02. Further, for the Type 2 cylinder, integrity was evaluated using a 119 L sound container and a container damaged by hydraulic pressure, by the slow-fill method according to ASTM E 2191-02. Based on the AET results of the Type 1 and Type 2 cylinders, quantitative evaluation criteria were established for a defective and non-defective container.