• 한국자동차공학회논문집
• /
• 제10권6호
• /
• pp.72-79
• /
• 2002

The main objective of this study is to investigate the relationship between chemical structure and higher heating value of reformed diesel fuels by ultrasonic irradiation. In order to analyze the chemical structure changes of the reformed diesel fuels by ultrasonic irradiation, Proton nuclear magnetic resonance spectrometer(1H-NMR) was used and to analyze the effect of higher heating values of these diesel fuels, the bomb calorimeter was used. From the study, following conclusive remarks can be made. 1) The aromatic carbon percentages and higher heating values of the reformed diesel fuels by ultrasonic irradiation increased more than the conventional diesel ones. 2) The aromatics percentages and Branch Index(BI) of the reformed diesel fuels by ultrasonic irradiation decreased more than the conventional diesel ones. 3) The higher heating values on both for conventional fuel and reformed diesel fuels by ultrasonic energy irradiation is directly proportional to aromatic carbon percentages and inversely proportional to aromatic percentages and BI for these fuels.

• Journal of Biosystems Engineering
• /
• 제37권6호
• /
• pp.429-433
• /
• 2012

Purpose: While rapeseed oil, soy bean oil, palm oil and waste cooking oil are being used for biodiesel, the viscosity of them should be lowered for fuel. The most widely used method of decreasing the viscosity of vegetable oil is to convert the vegetable oil into fatty acid methyl ester but is too expensive. This experiment uses ultrasonic energy, instead of converting the vegetable oil into fatty acid methyl ester, to lower the viscosity of the waste cooking oil. Methods: For irradiation treatment, the sample in a beaker was irradiated with ultrasonic energy and the viscosity and temperature were measured with a viscometer. For heating treatment, the sample in a beaker was heated and the viscosity and temperature were measured with a viscometer. Kinematic viscosity was calculated by dividing absolute viscosity with density. Results: The kinematic viscosity of waste cooking oil and cooking oil are up to ten times as high as that of light oil at room temperature. However, the difference of two types of oil decreased by four times as the temperature increased over $83^{\circ}C$. When the viscosity by the treatment of ultrasonic energy irradiation was compared to one by the heating treatment to the waste cooking oil, the viscosity by the treatment of ultrasonic energy irradiation was lower by maximum of 22% and minimum of 12%, than one by the heating treatment. Conclusions: Ultrasonic energy irradiation lowered the viscosity more than the heating treatment did, and ultrasonic energy irradiation has an enormous effect on fuel reforming.

• 한국식품과학회지
• /
• 제51권2호
• /
• pp.103-108
• /
• 2019

본 연구는 더덕 사포닌의 최적 추출 방법을 구명하기 위해 수행되었다. 추출 방법에 따른 lancemasides 함량을 조사하기 위해 환류 추출(MeOH, BuOH), 열수 추출(Hot water), 초음파 추출(ultrasonic bath (40 kHz; continuous irradiation, interval irradiation), ultrasonicator (20 kHz))을 실시하였다. 그 결과, 총 lancemasides함량은 ultrasonic bath (MeOH; continuous irradiation) 추출에서 가장 높았고, ultrasonic bath (water; continuous irradiation) 추출>ultrasonic bath (MeOH; interval irradiation) 추출>ultrasonicator 추출>열수 추출>메탄올 환류 추출>부탄올 환류 추출 순으로 높았다. 따라서 더덕 사포닌의 최적 추출 방법은 MeOH을 이용한 초음파(ultrasonic bath, 40 kHz) 추출이었고, 추출 전 시료 건조 방법은 동결건조보다 음건으로 건조하는 것이 lancemasides 추출에 더 효과적이었다. 또한 초음파 추출 시 추출 시간은 2시간, 추출 온도는 $64^{\circ}C$에서 추출 하는 것이 효과적임을 확인할 수 있었다. 따라서 초음파(ultrasonic bath)추출은 기존에 주로 이용하던 환류 추출 및 분획을 실시했을 때 보다 많은 양의 사포닌(lancemasides)을 추출할 수 있었다. 그리고 추출 시간과 온도와 같은 추출 조건에 따라 aster saponin Hb가 lancemaside류로 성분 변화가 일어나는 것을 확인하였다. 특히 추출 온도가 증가함에 따라 aster saponin의 함량이 줄어들고, lancemaside A의 함량이 증가하는 것으로 보아 추출 온도가 사포닌 성분 변화에 영향을 주는 것으로 사료된다.

• 한국환경보건학회지
• /
• 제21권3호
• /
• pp.102-106
• /
• 1995

This study was performed to examine factors affecting the decompostion of nondegradable polluants(trichloroethylene(TCE), phenol) using ultrasonic irradiation. The TCE and phenol, which are major hazard compounds causing environmental pollution, were not decomposable pollutants by conventional treatment. The results show that the oxidation and reduction reaction of ultrasound produced $H_2O_2$, $H^+$ and $OH^-$ radical, which decomposed pollutants of TCE and phenol in water. It was confirmed that the ultrasonic irradiation showed an excellent removal efficiency for the nondegradable pollutants than any other processes, utilized in the treatment of organic compounds in the industrial wastewater. Conclusively, these results suggest that ultrasonic irradiation may be highly useful for the treatment of wastewaters contaminated organic pollutants, which is difficult to treat economically by conventional process.

• 환경위생공학
• /
• 제10권1호
• /
• pp.76-84
• /
• 1995

This study was performed to examine the factors influenced on the decomposition of nondegradable organic pollutants( Tricholoroethylene,Benzene ) in aqueous by ultrasonic irradiation. The TCE( Tricholoroethylene ) and Benzene are major hazard compounds causing environmental Pollution and not decomposable substances by conventional treatment. The results shows that the oxidation and reduction reaction of ultrasonic Irradiation was formed the H$_{2}$O$_{2}$ , H$^{+}$ and OH$^{-}$ radical, and then theses was decomposed pollutants of TCE and Benzene in aqueous. We were conformed that the ultrasonic irradiation was excellent in removal efficiency of the nondegradable organic substances any other than processes and utilized the treatment of organic compounds in the industrial wastewater. Conclusively, these results suggest that ultrasonic irradiation may be extremely useful for the treatment of wastewater contaminated organic pollutants, which is difficult to treat economically by conventional treatment.

• 한국자동차공학회논문집
• /
• 제11권1호
• /
• pp.64-71
• /
• 2003

In order to analyze the effect of the chemical structure and the cetane number of reformed diesel fuels by ultrasonic energy irradiation, proton nuclear magnetic resonance spectrometer$(^1H-NMR)$ was used. From the study, following conclusive remarks can be made. 1) Branch Index(BI), aromatics percentages, and alpha methyl radical$(H_{\alpha})$ of the reformed diesel fuels by ultrasonic energy irradiation decreased more than the conventional ones. 2) All the cetane numbers which were calculated from carbon type structure and hydrogen type distribution of the reformed diesel fuels increased more than the conventional ones. 3) It is more reasonable to predict cetane number equation from carbon type structure than from hydrogen type distribution. 4) BI, aromatics percentages, and $H_{\alpha}$ on both for conventional fuel and reformed diesel fuels by ultrasonic energy irradiation are inversely proportional to cetane number fur these fuels.

• 한국물환경학회지
• /
• 제18권4호
• /
• pp.411-419
• /
• 2002

In this study, the series of ultrasonic irradiation for removal of refractory aromatic compounds has been selected as a model reaction in the batch reactor system in order to obtain the reaction kinetics. The products obtained from the ultrasonic irradiation were analysed by GC and GC/MSD. The decomposition of benzene produced toluene, phenol, and C1-C4 compounds, while the intermediates during the ultrasonic irradiation of 2,4-Dichlorophenol(DCP) were phenol, HCl, catechol, hydroquinone, and benzoquinone. It was found that more than 80% of benzene, and 2,4-DCP solutions were removed within 2 hours in all reaction conditions. The reaction order in the degradation of these three compounds was verified as pseudo-zero or first order. From the fore-mentioned results, it can be concluded that the refractory organic compounds could be removed by the ultrasonic irradiation with radicals, such as $H{\cdot}$ and $OH{\cdot}$ radical causing the high increase of pressure and temperature. Finally, it appeared that the technology using ultrasonic irradiation can be applied to the treatment of refractory compounds which are difficult to be decomposed by the conventional methods.

• 한국자동차공학회논문집
• /
• 제23권2호
• /
• pp.214-220
• /
• 2015

Since resources of fossil fuels are limited, development of alternative energies is emphasized and research on new-regenerative energy is actively in progress worldwide. In present research, physical and chemical characteristics of mixed fuel are analyzed in detail for the different mixture rate of conventional and bio-diesel and ultrasonic irradiation time. Experimental setup consists of ultrasonic generator, vibrator, horn, and reflector. Various physical and chemical characteristics of fuel are investigated for volumetric mixture rate of bio-diesel from 0 to 100%. As results, viscosity and surface tension is increased as mixture rate of bio-diesel is increased. Also, molecular splits and reunions are increased and decreased repeatedly after some period of time as ultrasonic energy irradiation time is increased. As conclusion of experiments, Olefin rate, Branch index, and Aromatic rate are influenced by ultrasonic irradiation time.

• Journal of Microbiology and Biotechnology
• /
• 제9권3호
• /
• pp.243-248
• /
• 1999

Ultrasonic wave technology was employed to improve filtration performance and ethanol production in a bioreactor equipped with an internal ceramic-membrane filter module. The filtration performance was found to depend on the power and the pattern of ultrasonic wave irradiation. Under the optimized conditions (irradiation time: 25 see, period: 5 min, and ultrasonic power: 60 W), the flux was improved with the periodic-pause method by 200-700％ compared with the control (with no irradiation), while the improvement was only 30 to 90％ without the periodic-pause method. The final ethanol concentration also increased slightly. However, in a more severe condition (irradiation time: 2.5 min, period: 5 min, and ultrasonic power: 110 W), the irradiation of ultrasonic waves was observed to disturb cell integrity and viability, and thus to decrease ethanol production.

• 한국주조공학회지
• /
• 제22권5호
• /
• pp.238-244
• /
• 2002

Water and oil were completely synthesised with ultrasonic vibration energy irradiation. Pure Pb were added into Al melt during irradiated the ultrasonic vibration energy in 750. And the ultrasonic vibration energy was applied to Al-Pb melt to enhance the miscibility. Microstructural analysis, thermal analysis and X-ray diffraction analysis were carried out to evaluate the effect of the ultrasonic vibration energy on the castability and microstructural reliability. (1) Using the ultrasonic vibration energy irradiation, the complete mixing of water and oil was obtained. (2) The microstructure was refined by the application of ultrasonic vibration energy in Al-Pb alloys. (3) Relatively large Pb particles, $5{\mu}m$ were most distributed alone the grain boundaries with fine Pb particles evenly distributed in the matrix. (4) The solubility of Ph in Al-Pb alloys was increases up to 5% with the application of ultrasonic vibration energy.