• 한국음향학회지
• /
• 제18권5호
• /
• pp.83-90
• /
• 1999

본 논문에서는 초음파 회절 토모그라피를 위한 FBP와 BFP 영상복원 알고리즘에 관한 분해능을 연구하였다. 고정좌표계를 사용한 수정된 FBP 영상복원 알고리즘과 평면구조물에 적합한 BFP 영상복원 알고리즘을 이용하여 복원할 수 있는 토모그라픽 영상에 대한 분해능을 분석할 수 있는 모호함수를 유도하고 모의실험을 통하여 얻은 측방향 및 축방향 분해능을 분석하였다. 분석결과, FBP 영상복원 알고리즘에 대한 측방향 및 축방향의 3dB분해능은 각각 0.27파장, 0.70파장을 얻었으며, 또한 BFP 영상복원 알고리즘에 대한 측방향 및 축방향 분해능도 각각 0.39파장과 0.98파장으로 정량적으로 결정하였다. 따라서 본 연구를 통하여 수정된 FBP 영상복원 알고리즘과 BFP 영상복원 알고리즘은 회절 토모그라피를 위한 영상복원에 유용하게 이용할 수 있음을 확인하였다.

• 오토저널
• /
• 제14권5호
• /
• pp.107-116
• /
• 1992

Recently, it is gradually raised necessity that interface is measured accurately and managed in industrial circle and medical world. An Ultrasonic wave transmitted from a focused beam tranducer is being expected as a powerful tool for NDE of the delamination. The Ultrasonic NDE of the delamination is based on the form of the wave reflected from the interface. In this study results, automatically repeated discrimination analysis method can be devided in the category of all kinds of defects on semiconductor package, and also can be possible to have a sampling of partial delamination.

• 비파괴검사학회지
• /
• 제10권2호
• /
• pp.43-49
• /
• 1990

Ultrasonic testing is one of the most useful NDT method for detection of microdefect in the opaque materials. Recently, many applications of the ultrasonic techniques have been extended widely in the new field like electron is and advanced materials. From the result of the experiment, we have hardly found out a crack in the internal parts of the resin and a delamination between chip and resin because of poor performance of the system.

• 산업기술연구
• /
• 제8권
• /
• pp.65-70
• /
• 1988

The intensity of ultrasound in liquid is calculated by improved analytic method. Helmholtz equation or Rayleigh's proposition does not offer the analytic solution. Considering a bounded medium, the use of the image source method in electromagnetic thoery gives a new way of calculating the total ultrasonic intensity in liquid. Some methods of measuring the intensities are also mentioned.

• 한국항행학회논문지
• /
• 제15권5호
• /
• pp.696-704
• /
• 2011

본 논문에서는 단일 카메라와 초음파센서 데이터를 융합하는 이동 로봇 주행제어 알고리즘을 제안하였다. 이진화 영상처리를 위한 임계값을 영상 정보와 초음파센서 정보를 이용하는 퍼지추론기법으로 설정하였다. 임계값을 상황에 따라 가변하면 조도가 낮은 환경에서도 장애물 인식이 향상된다. 카메라 영상 정보와 초음파 센서 정보를 융합하여 장애물에 대한 격자지도를 생성하고 원궤적 경로기법으로 장애물을 회피하도록 한다. 제안된 알고리즘의 성능을 입증하기 위하여 조도가 낮은 실내와 좁은 복도에서 Pioneer 2-DX 이동로봇의 주행제어에 적용하였다.

• 한국가시화정보학회지
• /
• 제3권1호
• /
• pp.78-89
• /
• 2005

An experimental study was carried out to investigate the effect of local ultrasonic forcing on a turbulent boundary layer. Stereoscopic particle image velocimetry (SPIV) was used to probe the characteristics of the flow. A ultrasonic forcing system was made by adhering six ultrasonic transducers to the local flat plate. Cavitation which generates uncountable minute air-bubbles having fast wall normal velocity occurs when ultrasonic was projected into water. The SPIV results showed that the wall normal mean velocity is increased in a boundary layer dramatically and the streamwise mean velocity is reduced. The skin friction coefficient (C$_{f}$) decreases 60$\%$and gradually recovers at the downstream. The ultrasonic forcing reduces wall-region streamwise turbulent intensity, however, streamwise turbulent intensity is increased away from the wall. Wall-normal turbulent intensity is almost the same near the wall but it increases away from the wall. In the vicinity of the wall, Reynold shear stress, sweep strength and production of turbulent kinetic energy were decreased. This suggests that the streamwise vortical structures are lifted by ultrasonic forcing and then skin friction is reduced.

• 비파괴검사학회지
• /
• 제32권5호
• /
• pp.564-572
• /
• 2012

본 논저에서는 하모닉 영상을 소개하고, 그 원리를 및 물리적 특성을 기존 초음파 영상과 대비하여 기술한다. 인체 조직의 경계에서 반사하는 초음파 에코를 이용한 기존의 초음파 영상의 원리를 제시하고 하모닉 성분을 생성하는 비선형 초음파 전파 과정을 개념적으로 기술한다. 초음파 에코 신호로부터 하모닉 성분을 효율적으로 추출하는 pulse inversion technique를 소개하고 구현된 하모닉 영상이 종래의 초음파 영상과 비교하여 장점을 요약한다. 하모닉의 생성 기전에 따라 하모닉 영상을 분류하고 하모닉 영상을 기존의 초음파 영상과 비교한다. 하모닉 영상의 임상적 중요성, 향후 전망 및 새로운 연구 분야를 언급한다.

• 제어로봇시스템학회논문지
• /
• 제21권4호
• /
• pp.315-320
• /
• 2015

This paper describes the implemenation of localization and visualization scheme to find out an ultrasonic source caused by defects of a power distribution line equipment. To increase the fault detection performance, $2{\times}4$ sensor array is configured with MEMS ultrasonic sensors, and from the sensor signals aquired, the azimuth and elevation angles of the ultrasonic source is estimated based on the delay-sum beam forming method. Also, to visualize the estimated location, it is marked on the background image. Experimental results show applicability of the present technique.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 1998년도 추계학술대회 논문집
• /
• pp.60-65
• /
• 1998

Recently, It is gradually raised necessity that thickness of thin film is measured accuracy and managed in industrial circles and medical world. Ultrasonic Signal processing method is likely to become a very powerful method for NDE method of detection of microdefects and thickness measurement of thin film below the limit of Ultrasonic distance resolution in the opaque materials, provides useful information that cannot be obtained by a conventional measuring system. In the present research, considering a thin film below the limit of Ultrasonic distance resolution sandwiched between three substances as acoustical analysis model, demonstrated the usefulness of ultrasonic Signal processing technique using information of ultrasonic frequency for NDE of measurements of thin film thickness, sound velocity, and step height, regardless of interference phenomenon

• 제어로봇시스템학회논문지
• /
• 제4권6호
• /
• pp.747-752
• /
• 1998

Ultrasonic sensors have been widely used to recognize the working environment for a mobile robot. However, their intrinsic problems, such as specular reflection, wide beam angle, and slow propagation velocity, require an excessive number of sensors to be integrated for achieving the sensing goal. This paper proposes a new measurement scheme which uses only two sets of ultrasonic sensors to determine the location and the type of a target surface. By measuring the time difference between the returned signals from the target surface, which are generated by two transmitters with 1 ㎳ difference, it classifies the type and determines the size of the target surface. Since the proposed sensor system uses only two sets of ultrasonic sensors to recognize and localize the target surface, it significantly simplifies the sensing system and reduces the signal processing time so that the working environment can be recognized in real time.