• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 추계학술대회 논문집
• /
• pp.250-253
• /
• 2002

The operation of surface and edge finishing is the last and essential process of parts machining, because a product is completed as an assembly. Therefore, the quality of the finished parts has a direct effect upon the performance of the product. Especially, the edge quality depending on the burr control process is very important. A number of deburring processes have been developed for macro burrs such as barreling, brushing, chemical methods, etc. However, micro burr removal when piercing a very thin plate is very difficult, because this badly deteriorates the surface quality of the processed part. When ultrasonic wave is propagated in liquids, it forms an infinitude of micro bubbles. These bubbles generate extremely strong force, which removes micro burrs. In ultrasonic micro deburring, the problem is that burrs are not removed completely, because only components of the explosive force directly act on the burrs, which is not enough. An attempt was made to remove the burrs using ultrasonic vibration in water with SiC as an abrasive agent. Because of the abrasive, smoother edges have been achieved. There are many control parameters in ultrasonic deburring such as abrasive size, ultrasonic frequency and amplitude, distance between tool and workpiece, tilt angle of workpiece etc. This study focuses on how distance and tilt angle influence deburring effect. A number of experiments for these parameters have been carried out, and then the effect of each parameter analyzed.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 하계종합학술대회 논문집(5)
• /
• pp.113-116
• /
• 2002

In this paper, we propose the sound-mapping algorithm of the detected obstacle by ultrasonic sensors. We apply this algorithm to a Obstacle alarm for the visually impaired. In our system, we acquire obstacles information using ultrasonic sensors, and transform two-dimensional and distance information into sound-imaging information and vibrator with azimuth (direction) and distance. We implement this system with ultrasonic sensors to more effective expression of the obstacle information. The distance of an obstacle can be expressed by sound pressure level, and azimuth of the obstacles can be expressed by inter-aural time difference (ITD) and inter-aural level difference (ILD) that are two important cues in a binaural system. These are the principal cues for sound localization, to detect sound source. In this system, the obstacle is substituted with a sound source. The visually impaired receive sound information of obstacles by headphone.

• Journal of Welding and Joining
• /
• 제18권5호
• /
• pp.77-83
• /
• 2000

This study proposes the analysis and evaluation method of time series ultrasonic signal using the attractor analysis. Features extracted from time series signal analyze quantitatively characteristics of weld defects. For this purpose, analysis objective in this study is fractal dimension and attractor quadrant feature. Trajectory changes in the attractor indicated a substantial difference in fractal characteristics resulting from distance shifts such as parts of head and flange even though the types of defects are identified. These difference in characteristics of weld defects enables the evaluation of unique characteristics of defects in the weld zone. In quantitative fractal feature extraction, feature values of 3.848 in the case of part of head(crack) and 4.102 in the case of part of web(side hole) and 3.711 in the case of part of flange(crack) were proposed on the basis of fractal dimensions. Proposed attractor analysis and DAC in this study can enhance the precision rate of ultrasonic evaluation for defect signals of rail weld zone such as side hole and crack.

• 비파괴검사학회지
• /
• 제10권1호
• /
• pp.10-17
• /
• 1990

Recently, object recognition ultrasonic sensor is being used with automatization of industrial machine. Points which characterize the object can be deleted by measuring the propagation time of ultrasonic impulse and azimuth which gives its maximum amplitude, and from these points shape, position and orientation of the object are deduced. A new measuring method is adopted, where the distance to the object is calculated by sound reflection time which is measured from O-cross point of sound wave, and azimuth is measured by angle indicating maximum amplitude. The measuring accuracy of 1.0mm for distance and $0.5-2^{\circ}$ for azimuth have been accomplished. By rotational scanning of sensor the characteristic point of an object can be known and it gives the information of its shape, position and orientation. Experimental results showed that the object of some complicated shape can be recognized, which suggest its applicability to robot.

• 한국안전학회지
• /
• 제20권1호
• /
• pp.30-35
• /
• 2005

This study proposes construction of through transmission for weld defects detection of rail weld zone from ultrasonic signals. For these purposes, the ultrasonic signals for defects(porosity and crack) of weld zone in rails are acquired in the type of time series data and echo strength. 6 lines in the distance amplitude characteristics curve(DACC) indicated damage evaluation standard of weld zone in rails. The acquired ultrasonic signals agree flirty well with the mesured results of reference block and sensitivity block(defect location beam propagation distance, echo strength, etc). The proposed construction of through transmission in this study can be used for weld defects detection of rail weld zone.

• 제어로봇시스템학회논문지
• /
• 제9권2호
• /
• pp.145-151
• /
• 2003

A global ultrasonic sensor system for self-localization of a mobile robot is proposed in this paper. The global ultrasonic sensor system consists of three or more ultrasonic transmitters fixed at some positions in the world coordinate and receivers in the moving coordinate of a mobile robot. In this global sensor system it is easy to get state vector of the mobile robot in the world coordinate from the distance information between each ultrasonic transmitter and receiver. An extended kalman filter algorithm is used to process the noisy ultrasonic signal and to estimate the state vector. In case of using several independent ultrasonic transmitters, it is necessary to avoid the cross talk among the ultrasonic waves and to synchronize between each ultrasonic transmitter and receiver. The small sized radio frequency modules are adopted to solve the cross talk and the synchronization problem Computer simulation and experiments are carried out to verify the effectiveness of the proposed ultrasonic sensor system.

• 한국전자통신학회논문지
• /
• 제12권1호
• /
• pp.53-60
• /
• 2017

현재 대부분의 초음파를 이용한 거리 측정 기술은 송신부로부터 수신기까지 초음파가 진행하는 시간 즉, TOF(: Time of Flight)를 측정하여 그 동안 음파가 진행한 거리를 산출하는 방법을 활용한다. 이 경우 거리 측정 정확도를 높이기 위해서는 정확한 TOF의 측정이 필요하다. 본 논문은 정확한 TOF를 산출하기 위해 초음파 송수신기의 수학적 모델을 이용하여 수신된 파형의 수학적 모델을 얻어내고 이를 바탕으로 TOF를 산출하는 방식을 제안한다. 이 방식은 트리거링 후부터 수신된 파형를 이미 얻어진 수학적 모델과 최소자승법을 이용하여 비교하여 초음파 신호가 수신기에 도달한 시점을 역으로 추정하는 방식이다. 제안된 방법을 사용할 경우 트리거링 시점의 변동에 의한 영향을 줄일 수 있음을 실험을 통하여 확인하였다.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2013년도 춘계학술대회
• /
• pp.293-298
• /
• 2013

본 연구는 수중 거리 측정을 위한 초음파 센서를 개발한다. 초음파 트랜스듀서는 음파를 발신하고 발신된 음파가 물체에 부딪혀 되돌아오는 반사파를 수신한다. 초음파 드라이버는 반사된 물체까지 거리 측정을 위해 음파의 비행시간을 검출해 음속을 곱한다. 본 연구에서는 비행시간을 검출하기 위해 임계값과 상호 상관 기법을 적용하고 그 결과를 보인다. 반사파가 노이즈에 감염되어 신호의 형태가 왜곡될 때 상호상관 기법은 기준 신호와 수신 신호의 유사성을 이용하여 비행시간을 검출한다. 기준 신호를 수중 환경에 따라 다르게 적용해 반사파와 유사성을 높여 센서의 성능을 향상시킨다. 논문에서는 초음파 센서 드라이버를 설명하고 실험환경에 따른 센서의 성능을 분석한다.

• 대한기계학회논문집A
• /
• 제23권7호
• /
• pp.1065-1074
• /
• 1999

This study proposes the analysis and evaluation method of time series ultrasonic signal using the chaotic feature extraction for ultrasonic pattern recognition. Features extracted from time series data using the chaotic time series signal analysis quantitatively welding defects. For this purpose analysis objective in this study is fractal dimension and Lyapunov exponent. Trajectory changes in the strange attractor indicated that even same type of defects carried substantial difference in chaoticity resulting from distance shills such as 0.5 and 1.0 skip distance. Such differences in chaoticity enables the evaluation of unique features of defects in the weld zone. In experiment fractal(correlation) dimension and Lyapunov exponent extracted from 6dB ultrasonic defect signals of weld zone showed chaoticity. In quantitative chaotic feature extraction, feature values(mean values) of 4.2690 and 0.0907 in the case of porosity and 4.2432 and 0.0888 in the case of incomplete penetration were proposed on the basis of fractal dimension and Lyapunov exponent. Proposed chaotic feature extraction in this study enhances ultrasonic pattern recognition results from defect signals of weld zone such as vertical hole.

• 한국정밀공학회지
• /
• 제14권8호
• /
• pp.49-56
• /
• 1997

In recent years, ultrasonic technics has been widely applied to industrial fields and its application range has been expanded as a result of continuous research and development. This paper is concerned with development of post-processor program for ultrasonic test and two-axis automatic ultrasonic system for application of industrial fields. Test results of ultrasonic test post-processor program and two-axis auto- matic ultrasonic system have a good agreement with results of ultrasonic evaluation for defect detection in industrial fields. Therefore we think that the developed ultrasonic test post-processor program and two- axis automatic ultrasonic system in this work is very useful for application of industrial fields.