• 한국정밀공학회지
• /
• 제31권7호
• /
• pp.561-567
• /
• 2014

Precision injection mold is an essential element in order to manufacture small and precision plastic lenses used for phone camera. There are many critical factors to meet the requested specifications of high quality plastic lenses. One of the main issues to realize high quality is minimizing decenter value, which becomes more critical as pixel numbers increases. This study suggests the method to minimize decenter value by modifying ejecting structure of the mold. Decenter value of injection-molded lens decreased to 1 ${\mu}m$ level from 5 ${\mu}m$ by applying suggested ejecting method. Also, we also developed BIS (Built-in Sensor) based smart mold system, which has pressure and temperature sensors inside of the mold. Pressure and temperature profiles from cavities are obtained and can be used for deduction of optimal injection molding condition, filling imbalance evaluation, status monitoring of injection molding and prediction of lens quality.

• Applied Science and Convergence Technology
• /
• 제25권6호
• /
• pp.108-115
• /
• 2016

Even if ion pumps are widely and mostly used in ultra-high vacuum (UHV) conditions, virtually every existing ion pump has its maximum pumping speed around 1E-6 mbar (1E-4 Pa). Discharge intensity in the ion pump Penning cell is defined as the current divided by pressure (I/P). This quantity reflects the rate of cathode bombardment by ions, which underlies all of the various pumping mechanisms that occur in ion pumps (chemisorption on sputtered material, ion burial, etc.), and therefore is an indication of pumping speed. A study has been performed to evaluate the influence of magnetic fields and cell dimensions on the ion pump discharge intensity and consequently on the pumping speed at different pressures. As a result, a combination of parameters has been developed in order to design and build an ion pump with the pumping speed peak shifted towards lower pressures. Experimental results with several different test set-ups are presented and a prototype of a new 200 l/s ion pump with the maximum pumping speed in the 1E-8 mbar (1E-6 Pa) is described. A model of the system has also been developed to provide a framework for understanding the experimental observations.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2004년도 제22회 춘계학술대회논문집
• /
• pp.320-324
• /
• 2004

Laser Propulsion is a device that generates thrust using laser energy. Laser-driven In-Tube Accelerator (LITA) has been developed at Tohoku University. LITA is a laser propulsion system that accelerates an object not in an open air but in a tube. Experiments of vertical launching and pressure measurement on the tube wall were carried out and in order to observe the initial state of plasma and blast wave, the visualization experiment was carried out using the shadowgraph method. In this study, the time variation of pressure on the tube wall is numerically simulated solving Euler equation. In order to model the laser energy, heat source function added to the frozen flow Euler equation. Plasma size from the shadowgraph images was used for the initial condition of laser energy input. For verification of the modeling, these results were compared with the previous experimental and numerical results. From these verifications, an analysis of LITA performance will be investigated.

• 생약학회지
• /
• 제50권2호
• /
• pp.102-111
• /
• 2019

Inflammation that is considered to be mainly related to pathogenesis of atopic dermatitis (AD) is the biological response of a host to stimuli, such as cellular injury or infection. In this study, we investigated the anti-inflammatory and anti-oxidative activities of white ginseng roots by ultra high pressure extraction (Gin-UHP), fermentation followed by ultra high pressure extraction (Gin-UHPF), and polyol extraction (Gin-POL). As a result, ginseng extracts were able to decrease the secretion of pro-inflammatory cytokines (interleukin-8 and tumor necrosis factor-alpha) and immunoglobulin E. Also, Gin-POL had the highest DPPH radical scavenging activity and when we compared the SOD-like activity, Gin-UHP had the highest. Moreover, we looked into the effect of these ginseng extracts on anti-aging to show the possible usefulness as a raw material of cosmetics. As a result, ginseng extracts were able to reduce the production of melanin, and inhibit the tyrosinase and elastase activities in a dose-dependent manner. The extracts also decreased the expression of MMP-1 and had a significant hyaluronidase inhibitory activity. Taken together, these results demonstrate that ginseng extracts may have an improvement effect on AD by using its anti-inflammatory and antioxidant properties.

• 콘크리트학회논문집
• /
• 제22권3호
• /
• pp.287-295
• /
• 2010

본 연구에 사용한 시멘트는 보통 포틀랜드 시멘트이며, 공극 최소화를 위한 충전재는 미세석영을 사용하였고 고강도화에 따른 취성파괴 문제를 개선하기위해 강섬유를 사용하여 압축강도 300 MPa 이상의 초고강도 분체콘크리트를 개발 하고자 하였다. 콘크리트의 강도를 크게 향상시키기 위한 연구의 일환으로 계면영역의 부착강도를 향상시킬 수 있는 크기 0.6 mm 이하의 규사, 백운석, 보크사이트, 페로실리콘을 선정한 후 각각의 배합비, 양생조건을 달리하여 압축강도를 비교분석 하였다. 초고강도 분체콘크리트는 보통콘크리트와 달리 사용재료의 영향이 대단히 중요하다. 분체 콘크리트의 압축강도 측정 결과 페로실리콘 > 보크사이트 > 백운석 > 규사 순으로 골재의 강도가 압축강도에 큰 영향을 미치는 경향을 알 수 있었으며 페로실리콘의 경우 시멘트 중량 기준하여 혼입량 110%일 때 가장 큰 강도를 나타내었다. SEM 촬영 결과 C-S-H수화물이 비교적 많이 생성되었고, 고온고압양생으로 토버모라이트와 조놀라이트가 생성된 것을 확인 하였다. 또한 골재의 세립화, 분체의 치밀충전화 및 반응성 재료의 사용으로 인해 페이스트가 고강도화 되고, 강섬유를 사용하여 인성을 보강함으로써, 28일 압축강도 341 MPa의 초고강도 분체콘크리트를 성공적으로 개발 하였다.

• 한국조리학회지
• /
• 제20권4호
• /
• pp.27-36
• /
• 2014

본 연구에서는 초고압 추출공정을 이용하여 전통적인 기존 추출공정과 비교함으로써 초고압 추출공정에 의한 꼬마칼라감자의 항산화 활성 증진을 확인하고자 연구를 수행하였다. 초고압 처리 추출물의 수율이 15분 처리시 2.10, 30분 처리시 2.41%로 추출 수율을 나타내어 일반 열수추출공정(1.73%)과 비교하여 약 1.2~1.4배의 추출수율을 나타내었다. 초고압 공정에 따른 변화 비교에서는 초고압 공정을 병행하였을 시 총 페놀과 플라보노이드 함량이 초고압 공정을 거치지 않은 것보다 다소 증가되는 것으로 보아 활성성분의 용출이 증진된 것으로 보인다. DPPH radical 소거 활성은 30분 초고압 처리한 추출물이 1.0 mg/mL에서 76.21%로 높은 활성을 나타내었으며, 환원력 역시 전체적으로 초고압 공정을 실시하였을 때의 활성이 높게 측정되었다. 초고압 추출이 꼬마칼라감자 내부 조직까지 영향을 주어 세포벽이 깨어지면서 조직 및 구조가 변화한 것으로 판단되며, 이를 통해 수율 및 활성 성분의 용출 증가가 이루어 진 것으로 사료된다. 따라서 꼬마칼라감자의 초고압 추출공정의 최적화를 통한 활성물질의 추출 극대화를 통해 높은 경제적 가치를 이룰 것으로 판단된다.

• 한국전기전자재료학회논문지
• /
• 제11권4호
• /
• pp.261-266
• /
• 1998

In developing the high density memory device, the etching of fine pattern is becoming increasingly important. Therefore, definition of ultra fine line and space pattern and minimization of damage and contamination are essential process. Also, the high density plasma in low operating pressure is necessary. The candidates of high density plasma sources are electron cyclotron resonance plasma, helicon wave plasma, helical resonator, and inductively coupled plasma. In this study, planar type magnetized inductively coupled plasma etcher has been built. The density and temperature of Ar plasma are measured as a function of rf power, flow rate, external magnetic field, and pressure. The oxide etch rate and selectivity to polysilicon are measured as the above mentioned conditions and self-bias voltage.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1994년도 하계학술대회 논문집 C
• /
• pp.1559-1561
• /
• 1994

At present, the principle of puffer action in high current interruption is adopted in almost of the EHV(Extra High Voltage) and UHV(Ultra High Voltage) GCB(Gas Circuit Breakers). The thermal interruption capability of these GCBs critically depends on the pressure rise in the puffer cylinder at current zero. The pressure rise in the puffer cylinder depends on the puffer cylinder volume, flow passage and leakage area in the interrupter, stroke curve etc. Recently commercial CFD(Computational Fluid Dynamics ) packages have been widely adopted to calculate the pressure distribution in the interrupter. However, there are still several problems with it, e.g. very expensive price, moving boundary problem, computation time, difficulty in using the package etc. Thus, the calculation of the puffer cylinder pressure in simple and relatively correct method is essential in early stage of GCB design. In these paper, the model ing technique and computed results for EHV class GCB (HICO, 145kV 40kA and 362kV 40kA GCB) are presented and compared with available measured results.

• 한국수소및신에너지학회논문집
• /
• 제16권3호
• /
• pp.290-295
• /
• 2005

For the application of fuel cell, the content and concentration of impurities in hydrogen stream must be classified. The purpose of this study is to provide analysis tool for the determination of impurities in hydrogen with ultra high purity. To produce UHT hydrogen, we purified hydrogen gas by both getter-based catridge and liquid-nitrogen soaked catridge. We compare two methods and propose new method to know about what is in hydrogen stream.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2003년도 춘계학술대회 논문집
• /
• pp.756-759
• /
• 2003

Steam Generator is one of the most important structural part of nuclear power plant. It is manufactured by welding process of various steel forgings such as shell, head, torus and tube sheet. These steel forgings have been made by open die forging process. After steel melting and ingot making, open die forging has been carried out to get a good quality which means high soundness and homogeniety of the steel forgings by using high capacity hydraulic press. This paper introduced open die forging status and investigated forging method of the ultra large steel forgings which is used for the steam generator of 1000MW nuclear power plant. For the same thing. the type of steel forgings consisting steam generator is classified by shell, head, torus and tube sheet. And corresponding forging processes of the steel forgings have been investigated.