• Proceedings of the KIEE Conference
• /
• 2002.07d
• /
• pp.2653-2655
• /
• 2002

본 연구에서는 UWB(Ultra Wide Band width)기술인 임펄스 기술을 이용하여 초광대역 지반탐사 레이다를 개발하였다. 국내에서 사용되는 지반탐사 레이다는 대부분 수입품에 의존하고 있으며 이는 국내의 토양환경이나 측정 조건 등을 고려하지 않은 제품이기 때문에 기대만큼 만족도를 주지 못하고 있다. 따라서 국내 토양환경의 대부분을 차지하는 점토질에 대한 분석과 함께 지반탐사를 위한 최적의 주파수를 분석하고 이를 바탕으로 국내환경에 적합한 지반탐사 레이다를 개발하고자 하였다. 본 연구에서는 100$\sim$300MHz외 주파수 대역을 가지는 임펄스를 이용하여 지반탐사 레이다 시제품을 개발하였으며 측정결과에서 지하 50cm$\sim$1m 이내에 매설된 금속 매설물들을 모두 검출하였으며 3m 범위까지 레이더 탐지가 가능함을 확인하였다. 기능 구현시 관련 프로그램 및 측정조건 등을 모두 모듈화 하여 향후 기능개선 및 적용분야 확대에 응용이 가능하도록 하였다.

• Proceedings of the IEEK Conference
• /
• 2006.06a
• /
• pp.41-42
• /
• 2006

In this paper, we propose a rapid asynchronous UWB (Ultra Wide Band) position location scheme based on double RTTs (Round-Trip Transmissions). In the proposed scheme, to avoid performance degradation of the position location in harsh multipath channel environments where LoS (Line-of-Sight) components are not always guaranteed, the remaining RTT information is solved from realistic double RTTs. Simulation results in IEEE 802.15.4a UWB channel models reveal that the proposed scheme can achieve closely comparable position location accuracy of the conventional ToA (Time of Arrival) method based on triple RTTs, while reducing the processing delay required for the calculation of the position locations.

• Proceedings of the KIEE Conference
• /
• 2007.10a
• /
• pp.387-388
• /
• 2007

IEEE 802.15.4a의 UWB(ultra-wide band) 방식에서 PHY(physical layer) 시스템에 사용되는 FEC(forward error correction)는 RS(Reed-Solomon) 조직적(systematic) 블록 부호와 1/2의 부호율을 가진 조직적 길쌈 부호의 연접 형태로 이루어져 있다.[1] UWB 신호를 이용한 시스템은 연속적이지 않은 임펄스(impulse) 기반의 신호를 사용하기 때문에 정밀도 면에서 뛰어난 장점을 가진다. 본 논문에서는 IEEE P802.15.4a 표준에 명시되어 있는 FEC를 구현하여 AWG(adaptive white gaussian noise) 채널에서의 SNR(signal to noise ratio)에 따른 BER(bit error rate)을 구함으로써 성능을 분석하였다. 실험에서의 정확한 결과를 얻기 위해 15.4a의 UWB에서의 변조 방식에 따라 신호를 변조한 후 잡음을 삽입하여 결과를 도출하였다.

• ETRI Journal
• /
• v.29 no.5
• /
• pp.670-672
• /
• 2007

An ultra-wideband low-noise amplifier is proposed with operation up to 8.2 GHz. The amplifier is fabricated with a 0.18-${\mu}m$ CMOS process and adopts a two-stage cascode architecture and a simplified Chebyshev filter for high gain, wide band, input-impedance matching, and low noise. The gain of 19.2 dB and minimum noise figure of 3.3 dB are measured over 3.4 to 8.2 GHz while consuming 17.3 mW of power. The Proposed UWB LNA achieves a measured power-gain bandwidth product of 399.4 GHz.

• Journal of Institute of Control, Robotics and Systems
• /
• v.12 no.12
• /
• pp.1231-1234
• /
• 2006

In this study, we detected electromagnetic waves generated in an enclosed switchgear and applied various statistical methods for detecting signals. We calculated the various statistical factors via the appropriate statistical methods. Further, we used these statistics to recognize the characteristics for each pattern by identifying the partial discharge in each case for normal, proceeding and abnormal states. The characteristics of electromagnetic wave patterns occurred in various states at electric power facilities and were used as an output variable for more efficient diagnosis. In this paper, we confirmed that the pattern of partial discharge signal can be used as one of the factors used to analyze the insulation state and to consider while estimating diagnosis of insulation states by recognizing the signal pattern to intelligence. We will utilize the proposed diagnosis method to determine insulation degradation states.

• Proceedings of the IEEK Conference
• /
• 2007.07a
• /
• pp.185-186
• /
• 2007

In this paper, We propose the selective detection scheme based on pulse repetition considering Bit Error Rate (BER) performance and complexity of noncoherent Ultra Wide Band (UWB) systems. To consider system complexity, the proposed scheme transmits the UWB signals by pulse repetition at the transmitter, like the conventional Pulse Repetition Coding (PRC). However, to effectively improve BER performance of the system the proposed scheme performs selective detection by estimating the Signal-to-Noise Ratio (SNR) of the received pulse-repeated signal at the receiver. Hence, the proposed scheme effectively improves BER performance of the noncoherent UWB systems without increase of the system complexity, as compared to the conventional PRC algorithm.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.7A
• /
• pp.702-708
• /
• 2006

본 논문에는 초광대역 통신시스템을 위한 주파수 영역의 통계학적 채널 모델을 서술하고 있다. 채널 모렐링은 3개의 사무실 환경, 46개의 송, 수신 위치에서 얻어진 23,000개의 채널응답함수로 부터 얻어졌다. 측정실험을 통해 얻어진 데이터를 바탕으로 주파수 변화에 따른 경로감쇄지수 변화에 대해 서술한 후 전파환경과 가시경로의 존재여부에 따른 수신신호의 확률분포모델을 연구하였다. 마지막으로는 수신된 주파수 톤에 해당하는 수신파워의 표준편차와 같은 통계적 특성들을 고찰하였는데, 가시경로가 존재하는 경우에는 송, 수신기 사이의 거리가 멀어지면서 표준편차 값이 커지고 그에 따라 수신 주파수 톤의 파워가 평균 수신파워에서 일정한 범위 안에 들어올 확률이 떨어지는 것을 알 수 있었다.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.55 no.12
• /
• pp.597-600
• /
• 2006

When the energy of the nanoseconds high voltage pulse with hundreds picoseconds of the pulse rise time is emitted into the free space via an antenna, an ultra wide band electromagnetic wave is generated. This electromagnetic wave is expected to be used in transmitting vast amount of informations to far distance, high performance radars, post-packaging pasteurization of food, the detection of underground buried objects, searching of underground water veins or caves, the treatment of waste water or polluted gases and so forth. Additionally, this technology can be used in EMI(electromagnetic interference) evaluation of measuring instruments or printed circuit boards.

• Journal of Electrical Engineering and Technology
• /
• v.9 no.4
• /
• pp.1375-1384
• /
• 2014

Flashover of power transmission line insulators is a major threat to the reliable operation of power system. This paper deals with the flashover prediction of polymeric insulators used in power transmission line applications using the novel condition monitoring technique developed by PD signal time-frequency map and neural network technique. Laboratory experiments on polymeric insulators were carried out as per IEC 60507 under AC voltage, at different humidity and contamination levels using NaCl as a contaminant. Partial discharge signals were acquired using advanced ultra wide band detection system. Salient features from the Time-Frequency map and PRPD pattern at different pollution levels were extracted. The flashover prediction of polymeric insulators was automated using artificial neural network (ANN) with back propagation algorithm (BPA). From the results, it can be speculated that PD signal feature extraction along with back propagation classification is a well suited technique to predict flashover of polymeric insulators.

• Journal of information and communication convergence engineering
• /
• v.9 no.4
• /
• pp.405-410
• /
• 2011

In this paper, a conflict-avoided resource reservation scheme for UWB (Ultra Wide Band) WPAN (Wireless Personal Area Network) with D-MAC (Distributed Medium Access Control) is proposed. Since distributed characteristic of the WiMedia D-MAC supporting DRP (Distributed Reservation Protocol) scheme may cause lots of conflicts, overall performances of the WiMedia D-MAC can be deteriorated. In addition, once a DRP conflict occurs, only one of the DRP reservations involved in that DRP conflict maintains the reserved MASs, while the other DRP reservation must be terminated and DRP negotiations for them have to be re-started. Such DRP termination and renegotiation time delays due to the DRP conflicts can be a critical problem to the mobile devices transceiving real-time QoS traffic streams. Therefore, we propose a mechanism to avoid DRP conflicts by providing a kind of path diversity using relay transmission scheme and demonstrate its performance improvements via simulation results.