• 반도체공학회 논문지
• /
• 제1권1호
• /
• pp.9-13
• /
• 2023

본 연구에서는 SnO₂ 나노입자와 Pd 금속의 이중층으로 구성된 촉매층을 갖는 AlGaN/GaN 이종접합 기반의 상온동작 수소센서를 제작하여 해당 센서의 안정성 개선 연구를 수행하였다. 제작된 센서를 고온 환경이 아닌 상온에서 수소에 노출 및 차단을 반복하며 동작 시켰을 때 시간에 따라 대기전류가 감소하는 불안정한 전류 드리프트 (current drift) 현상이 발생하였지만, 자외선 (UV) 조사를 함께 진행하면서 반복 측정을 하였을 때 해당 불안정성의 가시적인 개선 효과를 이루었다.

• Advances in nano research
• /
• 제16권1호
• /
• pp.53-69
• /
• 2024

Advancements in the technology of building materials has led to diverse applications of nanomaterials with the aim to monitor concrete structures. While there are myriad instances of the use of nanoparticles in building materials, the production of smart nano cement-composites is often expensive. Thereupon, this research aims to discover a sustainable nanomaterial from tyre waste using the pyrolysis process as part of the green manufacturing circle. Here, Nano Structure Tyre-Char (NSTC) is introduced as a zero-dimension carbon-based nanoparticle. The NSTC particles were characterized using various standard characterization techniques. Several salient results for the NSTC particles were obtained using microscopic and spectroscopic techniques. The size of the particles as well as that of the agglomerates were reduced significantly using the milling process and the results were validated through a scanning electron microscope. The crystallite size and crystallinity were found to be ~35nm and 10.42%, respectively. The direct bandgap value of 5.93eV and good optical conductivity at 786 nm were obtained from the ultra violet visible spectroscopy measurements. The thermal analysis reveals the presence of a substantial amount of carbon, the rate of maximum weight loss, and the two stages of phase transformation. The FT-Raman confirms the presence of carboxyl groups and a ID/IG ratio of 0.83. Water contact angle around 140° on the surface implies the highly hydrophobic nature of the material and its low surface energy. This characteristic process assists to obtain a sustainable nanomaterial from waste tyres, contributing to the development of a smart building material.

• 한국잠사곤충학회지
• /
• 제30권1호
• /
• pp.33-39
• /
• 1988

본 시험은 자외선에 의해 구분된 황형광색견(Y.F.C)와 자형광색견(V.F.C)의 견층 sericin이 열수에 대한 성질과 견층 sericin 수용액의 물리적 성질 차이를 조사하고 제사성적에 미치는 영향을 검토한 결과를 요약하면 다음과 같다. 1. 용해온도에 따른 sericin의 용해성은 낮은 온도에서보다 높은 온도에서 Y.F.C와 V.F.C간의 차가 켰다. 2. 용해시간에 따른 sericin의 용해성은 Y.F.C 및 V.F.C 모두 비슷한 경향을 나타냈으나 Y.F.C가 V.F.C. 보다 용해성이 좋았다. 3. 초기 sericin 용해성을 도시하면 용해도가 다른 4개 부분으로 구분할 수 있었고 Y.F.C 및 V.F.C 모두 같은 형태였으나 각 용해속도에 있어서는 차이가 있었다. 4. Sericin 수용액의 표면장력 측정결과 처리후 방치 시간에 따른 변화 속도는 45분 이내에서 V.F.C가 빠르기 때문에 sericin의 용해성을 저하시킬 것으로 사료된다. 5. Sericin 입자의 비용적에 있어서 Y.F.C가 V.F.C 보다 크기 때문에 Y.F.C의 용해성이 좋은 것으로 추정된다. 6. 제사가공 중 견층 sericin 용해량은 Y.F.C가 V.F.C 보다 초기용해속도가 빠르기 때문에 전공정 sericin 유실량이 많았고 이 때문에 실켜기 공정에서 고치실의 풀림새를 향상시킨 것으로 사료된다.

• Journal of Korean Society for Atmospheric Environment
• /
• 제16권E호
• /
• pp.39-46
• /
• 2000

Volatile Organic Compounds (VOCs) are considered as the precursors of atmospheric ozone and photochemical smog formation. In particular, chemical plants have produced a lot of VOCs and thus they have been forced to reduce or remove air emissions from the on-site chemical facilities. For the effective removal of VOCs produced in the chemical plants, the authors employed a titanium oxide(TiO$_2$) mediated photo-catalytic oxidation method. The initiation methods employed in this study to produce oxygen radicals for th photo-catalytic oxidation of the VOCs were Ultra-Violet(UV), Non-Thermal Plasma(NTS), and a combination of Uv and NTP. This study focused on a comparison of the removal efficiencies of VOCs as a function of the initiation method such as NTP and/or UV techniques. Removal efficiency change of VOCs as was investigated as a function of the wavelength of the UV lamp(254, 302, and 365 nm) and the degree of TiO$_2$ coating (10 and 30%). In this study, it was identified that removal efficiencies if the VOCs under the normal air environment were much better than those under the nitrogen gas environment containing small amount of oxygen. Removal efficiency by NTP technique was much better than the UV or the combination of UV and NTP techniques. In a comparison if UV wavelengths employed, it was found that shorter wavelength showed better removal efficiency, compared with longer ones. When the removal efficiencies of VOCs were compared in terms of the degree of TiO$_2$ coating, the higher TiO$_2$coating showed better removal efficiency that the lower TiO$_2$ coating

• Fibers and Polymers
• /
• 제7권4호
• /
• pp.442-445
• /
• 2006

The purpose of this study was to compare the subjective fabric hand evaluation and wear comfort of PET treated by Ultraviolet and to evaluate the subjective results from the investigation of microclimate temperature. The subjective hand evaluation was performed by 20 subjects (age: 20-25) with 5-point scale questionnaires to investigate the change of PET knit fabrics treated for different times, specifically, 0, 30 and 90 minutes. The questionnaires were composite with 8 questions; roughness, smoothness, wetness, stiffness, coolness, touch, preference, and comfort. In order to evaluate sensations of wear comfort, we made garments with UV treated fabric and five female students were tested. They walked at the speed of 6.7 km/ hr for 15 minutes in an environment, which was controlled at $29^{\circ}C,\;75{\pm}5%$ RH. Before and after exercising, the microclimate under clothing and subjective wear comfort was measured. The results of subjective evaluation of fabric hand were that untreated and treated for 30 minutes PET were recognized as similar and have a good evaluation on comfort, preference, and touch. According to the result of wear comfort, clothing treated by UV for 90 minutes had the lowest value on the thermal and humidity sensations. In addition, the value of tactile and comfort sensation was the highest on the clothing treated by UV for 90 minutes. In the case of objective evaluation, PET treated for 90 minutes was the lowest on microclimate humidity. PET irradiated by UV for 90 minutes was more 'cool' in thermal sensation and more 'dry' in wet sensation. Accordingly, it was consistent with the result of subjective wear comfort.

• 폴리머
• /
• 제29권6호
• /
• pp.588-592
• /
• 2005

자외선을 차단할 목적으로, 단일 모재를 사용함으로써 기존 방법이 갖고 있는 차단제의 적층에 따른 두께 증가와 접착제의 반응 온도에 따른 변형 등의 단점을 개선하고자 하였다. 화장품 용기 및 옥외용으로 사용 가능한 고분자 필름(폴리카보네이트) 표면에 이온 조사를 통하여 고분자 표면을 개질하였다. 표면 개질된 필름의 280$\∼$400 nm 사이 자외선 차단 특성, 표면의 화학 및 형태 변화 특성, 자외선에 대한 저항성을 W분광기, FTIR(ATR)과AFM, UV 촉진 내광성 시험기를 이용하여 측정하였다. 분석 결과, 개질된 고분자 필름은 자외선 전 영역을 차단할 수 있었고 이온의 주입량에 따라 차단율을 자유롭게 변화시킬 수 있었다. 이는 이온들의 주입으로 인한 고분자의 표면 화학 변화에 기인한다. 개질된 고분자 표면은 nm수준으로, 별도의 차단제가 필요없는 하나의 모재로, 자외선 차단을 위해 활용 할 수 있으리라 판단된다. 또한 자외선 조사에 따른 고분자의 색 변화 및 자외선 투과 특성 변화가 없음을 확인하여 일상 생활환경에서 지속적인 자외선 차단 방법으로 사용 가능하리라 기대할 수 있었다.

• 한국재료학회지
• /
• 제12권11호
• /
• pp.840-844
• /
• 2002

A spherical $BaMgAl_{10}$ $O_{17}$ :Eu phosphor has been synthesized by a multi-step precipitation route. In order to successfully synthesize the phosphor with spherical shape, the hydrated-alumina particles should be controlled for spherical shape. In this process, the hydroxypropyl cellulose (HPC) was used as a dispersing reagent. This reagent plays an important role in that the particles were controlled to have the uniform size of sub-micron. The final product prepared by the multi-step precipitation method maintained spherical shape with uniform size of 0.4$\mu\textrm{m}$. It can be seen in X-ray diffraction patterns, formation of the single phase of $BaMgAl_{10}$ $O_{17}$ :Eu phosphor prepared by the multi-step precipitation method at $1350^{\circ}C$. Also, the emission spectra of spherical $BaMgAl_{O}$ $10_{17}$ :Eu phosphor in the present case was compared with those of commercially-available blue phosphor under VUV (Vacuum Ultra Violet) excitation. The luminescence process of the $BaMgAl_{10}$ $O_{17}$ :Eu phosphor is characterized by the $4f^{6}$$5d^1$longrightarrow4f$^{7}$ transition (blue) of the $Eu^{2+}$ ion acting as an activating center and the maximum luminescence intensity was obtained by reduction treatment at 145$0^{\circ}C$.

• 대한화학회지
• /
• 제39권7호
• /
• pp.559-563
• /
• 1995

인도네시아 Manado만의 Sulawesi에서 채집한 KB cancer cell line에 대해 in vitro로 활성을 갖는 해면 Luffariella sp.으로부터 Germacrene alcohol(1), Aaptamine(2) 및 Hexacyclic terpene(3)을 분리하였으며, 1에대한 spectral data는 문헌치와 비교${\cdot}$분석하여 수정하였다. 이들을 $^1H$, $^13C$ NMR, $^1H$ $^13C$(bond) Heteronuclear Multiple Quantum Coherence Spectroscopy(HMQC), $^1H$$^13C$(2 and 3 bond)Heteronuclear Multiple Bond Correlation Spectroscopy(HMBC), Electron Impact Mass Spectroscopy(EI ms), UV 및 IR에 의해 밝혔다.

• 천문학회보
• /
• 제40권1호
• /
• pp.53.2-53.2
• /
• 2015

Fiber Bragg gratings (FBGs) are the most compact and reliable method of suppressing atmospheric emission lines in the infrared for ground-based telescopes. It has been proved that real FBGs based filters were able to eliminate 63 bright sky lines with minimal interline losses in 2011 (GNOSIS). Inscribing FBGs on multi-core fibers offers advantages. Compared to arrays of individual SMFs, the multi-core fiber Bragg grating (MCFBG) is greatly reduced in size, resistant to damage, simple to fabricate, and easy to taper into a photonics lantern (PRAXIS). Multi-mode fibers should be used and the number of modes has to be large enough to capture a sufficient amount of light from the telescope. However, the fiber Bragg gratings can only be inscribed in the single-mode fiber. A photonic lantern bi-directionally converts multi-mode to single-mode. The number of cores in MCFBGs corresponds to the mode. For a writing system consisting of a single ultra-violet (UV) laser and phase mask, the standard writing method is insufficient to produce uniform MCFBGs due to the spatial variations of the field at each core within the fiber. Most significant technical challenges are consequences of the side-on illumination of the fiber. Firstly, the fiber cladding acts as a cylindrical lens, narrowing the incident beam as it passes through the air-cladding interface. Consequently, cores receive reduced or zero illumination, while the focusing induces variations in the power at those that are exposed. The second effect is the shadowing of the furthest cores by the cores nearest to the light source. Due to a higher refractive index of cores than the cladding, diffraction occurs at each core-cladding interface as well as cores absorb the light. As a result, any core that is located directly behind another in the beam path is underexposed or exposed to a distorted interference pattern from what phase mask originally generates. Technologies are discussed to overcome the problems and recent experimental results are presented as well as simulation results.

• 대한화학회지
• /
• 제11권3호
• /
• pp.111-116
• /
• 1967

韓國 山野에 野生하는 참조팝나무 Spiraea Koreana Nakai(Spiraeceae)엽으로 부터 m.p. 182~$184^{\circ}C$의 苦味를 갖인 Alkaloid를 無色 柱狀의 結晶으로 얻었다.(收得率 0.13%). 이 物質은 光學的으로 活性이며(比旋光度$[{\alpha}]d^{19}+3.4^{\circ}$ in $CHCl_3$), Mass Spectrometry에 依해 決定한 分子式은 $C_{23}H_{33}NO_3$이다. 文獻未記載의 것임으로 Spirajine이라 命名하였다. Spiraea Koreane N. 葉 中에는 이 外에도 다른 2種의 알칼로이드가 微量으로 含有되어 있음을 Thin Layer Chromatography로 確認하였으나 結晶으로는 못 얻었다. Spirajine의 部分化學構造에 對해 化學反應, UV, IR, NMR, MS, ORD 等으로 分析檢討함과 아울러 Mass Spectrogram의 Cracking Pattern으로부터의 Fragmentation Analysis의 結果, 分子 中 Cyclohexane 및 Cyclopentane 고리들을 갖으며 그 中 하나는 ${\alpha},{\beta}$ 不飽和 Cyclohexenone고리이고 그 外에 methyl基, 카보닐基, 水酸基, N-Methyl基 等 여러 作用基의 存在를 決定하였다.