• Title/Summary/Keyword: Ugii Nuur

Search Result 5, Processing Time 0.017 seconds

Distribution of Fe-Mn Ore in Ugii Nuur, Mongolia Using Magnetic Data (자력자료를 이용한 몽골 우기누르 철-망간 분포 특성)

  • Park, Gyesoon;Lee, Bum-Han;Kim, In-Joon;Heo, Chul-Ho
    • Journal of the Korean earth science society
    • /
    • v.35 no.6
    • /
    • pp.422-428
    • /
    • 2014
  • Korea Institute of Geoscience and Mineral Resources (KIGAM) and Mineral Resources Authority of Mongolia (MRAM) performed a joint survey on Ugii Nuur Fe-Mn mineralized area. Following the survey, we carried out magnetic survey and 3D magnetic susceptibility inversion. Based on the inversion results, basic feasibility study and 3D imaging of Fe-Mn mineralized area were performed using 3D geological modeling technique. Using the distribution of total magnetic field data, we were confirmed for the possibility of horizontal extension of ore bodies from surface outcrops. The 3D magnetic susceptibility model, which is highly related with Fe content, analyzed by inversion shows that the ore bodies of Deposit 1 and Deposit 2 are extended to the underground and ore bodies that are not exposed on the surface are largely distributed in the underground. If we perform the integration analysis using this magnetic susceptibility model and the ore grade data analyzed by drilling survey, it is possible to carry out the effective potential evaluation of Ugii Nuur Fe-Mn ore deposit.

Resource Estimation of Ugii Nuur Fe-Mn Occurrence Area, Mongolia (몽골 우기누르 철-망간 산출지 자원량 평가)

  • Lee, Bum Han;Kim, In Joon;Heo, Chul-Ho
    • Journal of the Mineralogical Society of Korea
    • /
    • v.28 no.1
    • /
    • pp.1-7
    • /
    • 2015
  • Korea Institute of Geoscience and Mineral Resources (KIGAM) and Mineral Resources Authority of Mongolia (MRAM) performed test drilling in the right side of Deposit 2 in Ugii Nuur Fe-Mn occurrence area, Mongolia. It was decided to perform the drilling with 65 degree of drilling angle due to the technological limit of low angle drilling and designed to find ore bodies in cores between 50 m and 70 m. Ore bodies were found in lower depths than expected probably due to the folds in the subsurface in three drilling sites other than drilling position 3. Ore body in drilling position 3 was found in the similar depths with the expected depths. In drilling position 1, high Fe bearing ore body (more than 40%) was found between 47.45 and 50 m and between 56.35 and 57.1 m. The rest of ore body in drilling position 1 and ore bodies in other three sites have low Fe contents with about 10% of Fe. In drilling position 1, maximum and average Mn contents are about 10% and 1%, respectively, and in other three sites, average Mn contents are about 0.2%. Whereas Mn contents are low, Fe and Mn contents show very similar variations with varying depths, suggesting that they were moved and concentrated together in the ore genesis process. Proved resources estimated for the ore bodies confirmed by drilling are Fe 231,661 tonne with 11.82% of the average Fe grade. Possible resources supposing that ore bodies of DP-1 and DP-2 are connected and those of DP-3 and DP-4 are connected are Fe 4,415,296 tonne with 11.82% of the average Fe grade. The possibility of development of this area based on the estimated resources is low because the ore grade is low.

A Comparative Analysis between 3D Geological Modeling and Magnetic Data of Fe-Mn Ore in Ugii Nuur, Mongolia (몽골 우기누르 철-망간 부존 지역의 3차원 지질모델과 자력탐사 결과의 비교분석)

  • Lee, Jeong-a;Yu, Jaehyung;Park, Gyesoon;Lee, Bum han;Kim, In-Joon;Heo, Chul-Ho
    • Economic and Environmental Geology
    • /
    • v.48 no.4
    • /
    • pp.313-324
    • /
    • 2015
  • This study constructed a 3D geological model for Uggi Nuur Fe-Mn mineralization zone in Mongolia, and the 3D geological distribution is cross-analyzed with magnetic anomaly distribution to figure out relationship between ore zone and subsurface geology. As a result of 4 step 3D modeling procedures including geological cross section, surface modeling, foliation modeling and solid modeling, the geology of the both study area is bordered by faults in NW direction with Munguntessj formation being located in the west side of the fault while Yashill formation is located on the other side of the fault. Moreover, the strike direction of foliation in the both formation shows same directional pattern with the NW faults. The magnetic anomaly distribution reveals that higher anomaly values are concentrated to near the ground surface. The analyses of 3 dimensional distribution between subsurface geology and magnetic anomaly indicates that higher anomaly is mainly distributed over the Munguntessj formation as a elongated lens bodies whereas the magnetic anomaly is evenly found in the both of Munguntessj formation and Yashill formation in the study area 2. It infers that volcanic activities associated mineralization occurred during silurian period, and the mineralized zone is thought to be realigned along the geological structures caused by later stage tectonic activities.

Characteristics of Fe-Mn Mineralization in Ugii Nuur and Tamir Gol, Mongolia (몽골 우기누르와 타미르골의 철-망간 부존 특성)

  • Lee, Bum Han;Park, Gye Soon;Kim, In Joon;Lee, Gilljae;Heo, Chul-Ho;Koh, Sang-Mo
    • Journal of the Mineralogical Society of Korea
    • /
    • v.25 no.4
    • /
    • pp.313-322
    • /
    • 2012
  • 몽골 우기누르 지역 철-망간 광상과 타미르골 지역 철 광상의 광체는 먼곤체지 층 내에 렌즈상으로 협재되는 특성을 갖는다. 이러한 광상은 캠브리아 기에서 실루리아기에 이르는 화산 기원의 퇴적형 광상인 타미르골-요루골 광상구에 해당된다. 우기누르 지역의 철-망간 광체와 타미르골 지역의 철광체는 주로 규암과 편암을 모암으로 하여 먼곤체지 층 내에 렌즈상으로 협재되어 있다. 우기누르지역의 편암이 주로 세리사이트 편암인 데 비해 타미르골 지역은 주로 백운모 편암이 나타나는 차이를 갖는다. 또한 우기누르 지역의 광석은 망간이10에서 12% 함유되나 타미르골 지역의 광석은 망간이 1% 이하로 함량이 낮은 특성을 갖는다. 우기누르 철 망간 광상의 철 광물은 주로 자철석, 적철석이 우세하게 나타나고 기타 철 산화물과 황철석이 미량으로 수반되어 나타나며, 망간 광물은 주로스페사틴, 버네사이트가 우세하게 나타나고 기타망간 산화물이 수반되어 나타난다. 타미르골 지역의 철 광석은 자철석이 우세하게 나타나고 적철석이 수반되며 황철석, 철 산화물, 탄산질 철 등이 미량으로 수반되어 나타난다. 우기누르 철-망간 광상에 대한 육상 자력탐사 결과 높은 자기 이상값을보이는 영역이 지표에서 확인된 광체의 방향과 같은 약 $N30^{\circ}W$ 방향으로 나타나며 지표에서 확인된 광체 이외에 지표에 드러나지 않은 부분에서도 연장되는 것이 확인되었다.

General Geochemical Characteristics of Dashinchilen Nb-Ta and Sant Cu Occurrences in Southeastern Part of Khangai Area, Mongolia (몽골 항가이 남동부 지역 다신칠렌 탄탈륨-니오븀 및 산트 동 산출지의 지구화학적 특성 개요)

  • Kim, In Joon;Lee, Bum Han;Heo, Chul-Ho
    • Economic and Environmental Geology
    • /
    • v.46 no.5
    • /
    • pp.455-468
    • /
    • 2013
  • We performed reconnaissance survey on Dashinchilen Nb-Ta REE area and Sant Cu area which are located in southeastern part of Khangai rare metals mineralized belt. In Dashinchilen area, Nb and Ta have been found in pegmatitic granite that is largely distributed in the survey area and muscovite in pegmatite which is an intrusion in paleozoic sedimentary rocks which are mostly composed of sandstone. While grades of Nb and Ta are not high, an outcrop that has high Th and U contents (542 ppm of Th and 56.9 ppm of U) has been found. Average and maximum REE contents in the survey area is three times and seven times, respectively, larger than average REE contents in the crust of the Earth. In Sant area, copper oxides such as malachite has been found in quartzite in paleozoic sedimentary rocks. A sedimentary rock formation that has high grade of Mn (12.4-34.6 %) has been found in the survey area. This sedimentary rock formation is the same formation with that of Ugii Nuur Fe-Mn mineralization which is located about 200 km northwest of the survey area. Average and maximum REE contents in the survey area is two and half times and seven times, respectively, larger than average REE contents in the crust of the Earth. According to the factor analysis for the data of the geochemical analysis, Nb and Ta in Dashinchilen area are highly correlated with muscovite and Cu in Sant area is highly correlated with Mo, Sn, and Bi. Furthermore, the factor analysis results show that Fe in Sant area was deposited with rare earth elements.