• ETRI Journal
• /
• v.29 no.5
• /
• pp.676-678
• /
• 2007

In this letter, we propose a cognitive ultra-wideband radio scheme which is based on a modified chirp waveform. Therefore, it requires only time domain processing in the cognitive radio systems and reduces system complexity and power consumption.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.44 no.11
• /
• pp.1-10
• /
• 2007

In this paper, we proposed channel estimation scheme for LR-UWB system which has low data rate for WPAN in IEEE 802.15.4a. At the transmitter, we proposed dynamic power level allocation depends on channel condition in specific period when we modulate signal. We use two orthogonal code to estimate channel at once. It can estimate channel more accurately by using two code which shows good correlation characteristic then it can estimate more accurately by spreading gain. Using estimated channel condition, we synchronize symbol timing of transmitted signal. Then determined power allocation scheme and channel information is transmitted to transmiter side. Finally, using these information, transmiter side change the power level of repeated pulse to adopt to channel condition. Simulation is performed under S-V channel for LR-WPAN in IEEE 802.15.4a and we compare the performance with a different type of receiver type. We use coherent and non-coherent method at the receiver. Simulation result shows us at the NLOS channal performance evaluation is greater than that of LOS channel and the result is independent of receiver type. In the NLOS channel, as the signal delay spreading is big, performance evaluation is also increased.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.5A
• /
• pp.401-407
• /
• 2009

The multi-band (MB) ultra-wideband (UWB) communication system divides its available frequency spectrum in 3.1 to 10.6GHz into 16 sub-bands, which leads to inherent disparities between carrier frequencies of each sub-band. For instance, the highest carrier frequency is 2.65 times higher than the lowest one. Since the propagation loss is proportional to the square of the transmission frequency, the propagation loss on the sub-band having the highest carrier frequency is approximately 7 times larger than that on the sub-band having the lowest carrier frequency, which results in disparities between received signal powers on each sub-band. In this paper, we propose a novel correlation scheme for frequency hopping (FH) MB UWB communications, where the correlation time is adaptively adjusted relative to the sub-band, which reduces the disparity between the received signal energies on each sub-band. Such compensation for lower received powers on sub-bands having higher carrier frequency leads to an improvement on the total average bit error rate (BER) of the entire FH MB UWB communication system. We analyze the performance of the proposed correlation scheme in Nakagami fading channels, and it is shown that the performance gain provided by the proposed correlator is more significant as the Nakagami fading index n increases (i.e., better channel conditions).

• IEIE Transactions on Smart Processing and Computing
• /
• v.6 no.1
• /
• pp.10-17
• /
• 2017

We propose classification algorithms for human and dog movement. The proposed algorithms use micro-Doppler signals obtained from humans and dogs moving in four different directions. A two-stage classifier based on a support vector machine (SVM) is proposed, which uses a radial-based function (RBF) kernel and $16^{th}$-order linear predictive code (LPC) coefficients as feature vectors. With the proposed algorithms, we obtain the best classification results when a first-level SVM classifies the type of movement, and then, a second-level SVM classifies the moving object. We obtain the correct classification probability 95.54% of the time, on average. Next, to deal with the difficult classification problem of human and dog running, we propose a two-layer convolutional neural network (CNN). The proposed CNN is composed of six ($6{\times}6$) convolution filters at the first and second layers, with ($5{\times}5$) max pooling for the first layer and ($2{\times}2$) max pooling for the second layer. The proposed CNN-based classifier adopts an auto regressive spectrogram as the feature image obtained from the $16^{th}$-order LPC vectors for a specific time duration. The proposed CNN exhibits 100% classification accuracy and outperforms the SVM-based classifier. These results show that the proposed classifiers can be used for human and dog classification systems and also for classification problems using data obtained from an ultra-wideband (UWB) sensor.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.17 no.2
• /
• pp.387-392
• /
• 2022

In addition to complying with access standards for facilities that require infection control (operating rooms, delivery rooms, intensive care units, etc.) in accordance with the 2019 Medical Care Act Enforcement Regulations, entry, exit, contact information, etc. for entry and exit, the criteria for entering and exiting special rooms of medical institutions have been revised so that records of facts are kept for one year. However, even now, the inconvenience continues due to the fact that such contents are created by hand or due to errors. For this reason, this study designed and implemented a system that provides automatic opening, closing, and accessing record storage functions for authorized users using IoT devices and UWB technology, and we expected that the convenience of the visitors and systemized access control will be possible.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2021.10a
• /
• pp.603-605
• /
• 2021

With the expansion of the indoor service-providing robot market and the electrification of automobiles, research on autonomous driving is being actively conducted. In general, in the case of outside, the location is mainly recognized through GPS, and location positioning is performed indoors using technologies such as WiFi, UWB (Ultra-Wide Band), VLP, LiDAR, and Vision. In this paper, we introduce a system for location-positioning using LED lights with different color temperatures in an indoor environment. After installing LED lights in a simulated environment such as a tunnel, it was shown that information about the current location can be obtained through the analysis of chromaticity values according to location. Through this, it is expected to be able to obtain information about the location of the vehicle in the tunnel and the movement of the device in a room such as a warehouse or a factory.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.17 no.1
• /
• pp.25-30
• /
• 2024

Smart City, a key application area of the AIoT (Artificial Intelligence of Things), provides various services in safety, security, and healthcare sectors through location tracking and location-based services. an IPS (Indoor Positioning System) is required to implement location-based services, and wireless communication technologies such as WiFi, UWB (Ultra-wideband), and BLE (Bluetooth Low Energy) are being applied. BLE, which enables data transmission and reception with low power consumption, can be applied to various IoT devices such as sensors and beacons at a low cost, making it one of the most suitable wireless communication technologies for indoor positioning. BLE utilizes the RSSI (Received Signal Strength Indicator) to estimate the distance, but due to the influence of multipath fading, which causes variations in signal strength, it results in an error of several meters. In this paper, we conducted research on a path loss model that can be applied to BLE IPS for proximity services, and confirmed that optimizing the free space propagation loss coefficient can reduce the distance error between the Tx and Rx devices.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2002.05c
• /
• pp.160-164
• /
• 2002

A special discharge cell containing a free conducting particle was used to generate the discharges in $SF_6$. The analog bandwidth of the measurement system exceeded 5 GHz. The measured signals were processed to compensate for the response of the measurement system. The discharge current rise time was in the range of 70 ps, while its full-width half-maximum was 120 ps. Single and double current pulses of positive and negative polarities were measured. Likewise, these pulses were compared with the measurement obtained using a conventional partial discharge detector of the IEC60270 type

• Journal of The Institute of Information and Telecommunication Facilities Engineering
• /
• v.9 no.1
• /
• pp.29-34
• /
• 2010

In this study, we realized the broadband home gateway system of dual mode based upon EDR 2~3Mbps transmission speed and 300Mbps of 802.11n, In broadcasting and telecommunication convergence networks to deliver multimedia services, high-quality home. The bluetooth module is designed to use general low rate data speed service and the 802.11n module also is designed to use high rate speed service at various home network situation. The dual mode home gateway system, bluetooth and 802.l1n module, is well realized for many specification such as emission power, spurious power, impedance matching, frequency channel test.

• Journal of Satellite, Information and Communications
• /
• v.8 no.4
• /
• pp.64-69
• /
• 2013

Recently, users who are interested in the service at indoor spaces is increasing. An indoor positioning system can minimize a range of positioning error using a variety of wireless communication infrastructure. Also, the system improves an indoor positioning accuracy by combining a mobile communication network. However, flexible positioning technologies regardless of an environment are insufficient. Therefore, this is time for a systematic study on an indoor positioning system business model. This paper classify differences between an indoor positioning system technology and outdoor positioning system technology. And we research a construction and application of the indoor positioning system that is adapted a wireless communication system (Wi-Fi, Bluetooth, RFID, UWE, Fingerprint, etc.) in domestic and foreign. We present a successful model of indoor positioning system and the development for future systems.