• Journal of Communications and Networks
• /
• v.5 no.4
• /
• pp.309-318
• /
• 2003

This paper presents an in-depth study of a UWB indoor radio channel between 1 and 9 GHz, which was used for the subsequent development of a new statistical UWB multipath channel model, focusing on short range indoor scenarios. The channel sounding process was carried out covering different indoor environments, such as laboratories, halls or corridors. A combination of new and traditional parameters has been used to accurately model the channel impulse response in order to perform a precise temporal estimation of the received pulse shape. This model is designed specifically for UWB digital systems, where the received pulse is correlated with an estimated replica of itself. The precision of the model has been verified through the comparison with measured data from equivalent scenarios and cases, and highly satisfactory results were obtained.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2007.10a
• /
• pp.807-810
• /
• 2007

Recently, ultra-wideband (UWB) technology based on the transmission of short duration pulses has gained much interest for its application to wireless communications. UWB small scale channel modeling work, including statistical characterization and potential models, are discussed. The significance, in terms of performance, of the channel impulse response model chosen for the simulation of UWB communications systems is also evaluated. Three traditional models are found to be useful for modeling NLOS UWB channels, but not LOS channels. In this paper, a new model for LOS UWB channels is presented and shown to represent LOS channels much more accurately than the traditional models.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.44 no.5
• /
• pp.76-84
• /
• 2007

In this paper, we measured the propagation characteristics of I-UWB channel in time domain and in frequency domain. The measurements carried out in apartment environment while furniture and household electric appliance. Typical indoor scenarios, including line-of-sight(LOS), non-line-of-sight(NLOS) in room-to-room, within-the-room. A transmitting and receiving antenna is a biconical antenna. Results for indoor propagation measurements are presented for power delay profiles(PDP). We extracted the channel characteristic parameters from a power delay profile. Finally, we designed I-UWB channel model in indoor environment, and I-UWB simulator. The results of simulation shows BER characteristics below $10^{-5}$ for SNR over 20[dB].

• Proceedings of the IEEK Conference
• /
• 2004.06a
• /
• pp.305-308
• /
• 2004

In this paper, we analyze system level and link level performance for MB-OFDM UWB system. we propose physical layer model of MB-OFDM UWB system in MBOA. For this analysis, Base-band channel model from IEEE 802.15 3a was adopted. we considered the channel index parameter to select any one of 100 distinct realizations provided by the IEEE working group. Our experimental results indicate BER values according to Es/No.

• International journal of advanced smart convergence
• /
• v.1 no.1
• /
• pp.27-33
• /
• 2012

In this paper, we analyze and simulate performance of space time block coded (STBC) binary pulse amplitude modulation-direct sequence (BPAM-DS) ultra-wideband (UWB) systems with double binary turbo code in indoor environments for various ubiquitous healthcare (u-healthcare) applications. Indoor wireless channel is modeled as a modified Saleh and Valenzuela (SV) model proposed as a UWB indoor channel model by the IEEE 802.15.SG3a in July 2003. In the STBC encoding process, an Alamouti algorithm for real-valued signals is employed because UWB signals have the type of real signal constellation. It is assumed that the transmitter has knowledge about channel state information. From simulation results, it is shown that the STBC scheme does not have an influence on improving bit error probability performance of the BPAM-DS UWB systems. It is also confirmed that the results of this paper can be applicable for u-healthcare applications.

• 한국정보통신설비학회:학술대회논문집
• /
• 2008.08a
• /
• pp.253-256
• /
• 2008

In this paper, we analyze the performance of RAKE receiver for impulse radio-ultra wide band (IR-UWB) systems in indoor multipath radio channel. Pulse position modulation-time hopping (PPM-TH) signal is considered. And we also consider three types of RAKE receivers, which are ideal RAKE, selective RAKE, and partial RAKE receivers. The indoor channel is modeled as the modified Saleh and Valenzuela (SV) model which has been proposed as a UWB channel model by the IEEE group, IEEE 802.15.SG3a.

• Journal of Advanced Navigation Technology
• /
• v.25 no.5
• /
• pp.357-362
• /
• 2021

UWB(ultra wide band) communication systems employ short pulses to transmit information which spreads the signal energy over a very wide frequency spectrum. Received signal-to-noise power ratio of UWB signals is an important factor in determining the accuracy of a positioning system. As the signal to noise power ratio gets higher, positioning errors decrease since noise becomes less effective. Calculation of signal to noise power ratio as a function of communication distance provides important guidelines for the system design. And the performance of a positioning system also depends heavily on the channel model. As a result of the analysis, it was found that the performance of the received signal to noise power ratio according to the communication distance was better in the LOS channel environment than in the Non LOS(line of sight) channel environment. And as the symbol interval of the preamble signal increases at a specific communication distance, the channel capacity of the UWB system increases.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.2C
• /
• pp.199-205
• /
• 2004

This paper presents a method of UWB channel modeling, which includes the phase characteristics of the UWB channel. This is accomplished by decomposing a UWB pulse into several narrowband signal components. We show the ray-tracing algorithm can be used to acquire the amplitude and the phase of each signal component. Finally, it is shown that the received pulses simulated can have various shapes due to frequency-dependent reflectivity coefficient resulting from the intrinsic nature of ultra-wide bandwidth of a UWB pulse.

• Proceedings of the IEEK Conference
• /
• 2004.06a
• /
• pp.23-26
• /
• 2004

This paper analyzed time delay and phase distortion that generates in multipath and the degree of distortion due to power attenuation factor when UWB system is applied at indoor environment and the effects of indoor structure and material on distortion factors. Based on these distortion factors, channel model similar to actual environment is mathematically described and multipath and the degree of signal distortion generated when UWB system is applied to random environment is tested through channel model simulation and varies distortion factor that UWB system needs to consider in different indoor environment is analyzed.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.11A
• /
• pp.1096-1105
• /
• 2007

In this paper, we propose a solution on interference problem of MB-OFDM UWB system using cognitive radio. We use interference temperature model of cognitive radio that has proposed by FCC for estimating interference signal. Calculating channel capacity of MB-OFDM UWB system with interference temperature, we suggest how to solve interference problem. We have used genetic algorithm in cognitive engine's calculation process. The proposed MB-OFDM UWB System with cognitive radio shows very efficient in solving interference problem.