• Journal of Communications and Networks
• /
• v.5 no.4
• /
• pp.303-308
• /
• 2003

We present a statistical model for the path loss of ultrawideband (UWB) channels in indoor environments. In contrast to our previously reported measurements, the data reported here are for a bandwidth of 6GHz rather than 1.25GHz; they encompass commercial buildings in addition to single-family homes (20 of each); and local spatial averaging is included. As before, the center frequency is 5.0GHz. Separate models are given for commercial and residential environments and, within each category, for lineof sight (LOS) and non-line-of-sight (NLS) paths. All four models have the same mathematical structure, differing only in their numerical parameters. The two new models (LOS and NLS) for residences closely match those derived from the previous measurements, thus affirming the stability of our path loss modeling. We find, also, that the path loss statistics for the two categories of buildings are quite similar.

• ETRI Journal
• /
• v.27 no.5
• /
• pp.579-584
• /
• 2005

A CMOS direct-conversion mixer with a single transistor-level topology is proposed in this paper. Since the single transistor-level topology needs smaller supply voltage than the conventional Gilbert-cell topology, the proposed mixer structure is suitable for a low power and highly integrated RF system-on-a-chip (SoC). The proposed direct-conversion mixer is designed for the multi-band ultra-wideband (UWB) system covering from 3 to 7 GHz. The conversion gain and input P1dB of the mixer are about 3 dB and -10 dBm, respectively, with multi-band RF signals. The mixer consumes 4.3 mA under a 1.8 V supply voltage.

• ETRI Journal
• /
• v.35 no.5
• /
• pp.757-766
• /
• 2013

This paper deals with the estimation of the time of arrival (TOA) of ultra-wideband signals under IEEE 802.15.4a channel models. The proposed approach is based on a randomness test and consists of determining whether an autoregressive (AR) process modeling an energy frame is random or not by using a distance to measure the randomness. The proposed method uses a threshold that is derived analytically according to a preset false alarm probability. To highlight the effectiveness of the developed approach, simulation setups as well as real data experiments are conducted to assess the performance of the new TOA estimation algorithm. Thereby, the proposed method is compared with the cell averaging constant false alarm rate technique, the threshold comparison algorithm, and the technique based on maximum energy selection with search back. The obtained results are promising, considering both simulations and collected real-life data.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38A no.1
• /
• pp.96-107
• /
• 2013

In this study, we examine the effect of spreading sequence matched filtering on the power parameters of ultrawideband (UWB) multiuser interference (MUI) under different multiple access (MA) scenarios. More specifically, we investigate the manner in which the length of the sequence MF affects the average power, peak power, and the peak-to-average ratio (PAR) of the matched filtered version of an MUI signal. The results of the analysis performed for a simplified scenario are supported by the simulation results obtained for a realistic multipath environment.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.12A
• /
• pp.1177-1184
• /
• 2008

Non-line-of-sight (NLOS) propagation can severely weaken the accuracy of ranging and localization in wireless location systems. NLOS bias mitigation techniques have recently been proposed to relieve the NLOS effects, but positively rely on the capability to accurately distinguish between LOS and NLOS propagation scenarios. This paper proposes an energy-capture-based NLOS identification method for LDR-UWB systems, based on the analysis of the characteristics of the channel impulse response (CIR). With this proposed energy capture method, the probability of successfully identifying NLOS is much improved than the existing methods, such as the kurtosis method, the strongest path compare method, etc. This NLOS identification method can be employed in adaptive modulation scheme to decrease bit error ratio (BER) level for certain signal-to-noise ratio (SNR). The BER performance with the adaptive modulation can be significantly enhanced by selecting proper modulation method with the knowledge of channel information from the proposed NLOS identification method.

• Journal of Electrical Engineering and Technology
• /
• v.13 no.2
• /
• pp.928-935
• /
• 2018

In this paper, a compact fully printable bandpass filter is suggested for a low-frequency channel 3.2 GHz ~ 3.7 GHz in the Ultra-Wideband (UWB) communication system. It is featured with a small geometry of $0.5{\lambda}_g/15$ and a low insertion loss despite using FR4 as a cheap substrate of a high dielectric loss. This is made possible by generating zeroth-order-resonance (ZOR) from one cell comprising two series resonances obviously separated from one shunt resonance as a third-order bandpass filter. Especially, the series resonance elements are combined with spur-lines bent by 90 degrees, which makes the port-impedance matched well and eliminates spurious hikes in the stopband, while the overall size remains almost unchanged. The design is carried out by setting up the equivalent circuit and the circuit simulation is checked by the full-wave EM analysis. The structure is manufactured and measured to show that the circuit modeling and EM simulation results agree with the measured data.

• Proceedings of the IEEK Conference
• /
• 2003.11c
• /
• pp.216-219
• /
• 2003

In this paper, we present performance analysis of an IEEE P802.15.3a high rate wireless personal area network transceiver. This physical layer standard uses QOSK as its sub-channel modulation scheme and orthogonal frequency domain modulation (OFDM) for sub-bands. OFDM is used for each sub-band so that multi-path effects are absorbed by equalizer and guard, and fading can be approximately modeled as additive white Gaussian noise. In multi-band ultra-wideband system, DAC quantization error is important noise source since high resolution conversion cannot be used due to high power consumption. Simulation result shows that, to get 640-Mbps throughput, at least 5-bits precision is necessary to maintain bit-error rate under 10$\^$-2/, which can be lowered, with channel coding, to 10$\^$-6/ that is the bit-error rate required by IEEE 802.15 upper protocol layer, in 4-meter LOS fading channel.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.1A
• /
• pp.34-43
• /
• 2007

In the IEEE 802.15.3 Medium Access Control (MAC) protocol, Simultaneously Operating Piconets (SOPs) are linked by the parent/child (P/C) or parent/neighbor (P/N) configuration, which work on a Time Division Multiple Access (TDMA) basis. This provides interference mitigation but the overall throughput is limited because the SOPs share the channel time exclusively. The protocol is not efficient for SOPs if we focus on the combination of interference mitigation and high throughput maintenance. In this paper Public Channel Time Allocation (Public CTA) is proposed, which is able to greatly reduce the inter-piconet interference (IPI) and achieve greater throughput without much loss of link success probability (LSP) in the SOPs. The simulation results based on the SOPs of Direct Sequence Ultra Wideband (DS-UWB) system demonstrate that the proposed scheme effectively supports the coexistence of SOPs, and it can not only significantly improve the overall throughput of SOPs but also maintain high LSP.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.49 no.7
• /
• pp.65-70
• /
• 2012

In this paper, a compact UWB (Ultra Wideband) BPF(Band-Pass Filter) with dual notched bands is proposed using a hybrid Composited Right-Left Handed (CRLH) and Defected Ground Structure (DGS). To avoid the interferences such as Wireless LAN (Center frequency: 2.4GHz and 5.8GHz), the CRLH is employed to obtain the dual notched bands and the DGS is used to obtain the wide stop-band above the pass-band. The fabricated filter has good performance and has more than 30dB rejection at the center frequency of 2.4 GHz and 5.8GHz. The dual notched bands are easily movable by changing the CRLH parameter. Also the insertion loss is less than 0.4dB in the lower pass-band and 0.7dB in the upper pass-band, and it has small group delay variation less than 0.6ns. The size of the fabricated filter is very compact (17mm*17mm).

• Journal of the Institute of Electronics and Information Engineers
• /
• v.52 no.4
• /
• pp.17-22
• /
• 2015

In this paper, we propose a cooperative vehicle communication scheme for high transmission efficiency and coverage extension under multipath fading environment of moving vehicle networks. The proposed scheme uses a Network coding scheme for improvement of receiving performance by using virtual Multiple-Input Multiple-Output(MIMO) transmit diversity. Simulation results have shown that the proposed scheme also provides alleviated Inter Symbol Interference(ISI) and Inter Channel Interference(ICI) as well as Signal-to-Noise Ratio(SNR) improvement and improve 3dB compared to the conventional scheme, since it can utilize the good properties of spatial diversity and coding gain by using virtual MIMO configuration. In this paper, we propose simulations of Ultra-Wideband(UWB) communication system to show validity by using the MATLAB.