• The Korean Journal of Food And Nutrition
• /
• v.7 no.4
• /
• pp.332-337
• /
• 1994

The antioxidant activity of solvent extracts isolated from barley leaves was investigated by measuring peroxide value. The fractions of methanol extract obtained from preparative TLC was also studies, with UV-Visible spectrum, total phenol contents and hydrogen donating ability(HDA) The antioxidant activity of various solvent extracts was, in decreasing order, methanol> ethyl ether> methylene chloride $\geq$ ethyl acetate $\geq$acetone> hexane. The antioxidant activity of the fractions of methanol extract was, in decreasing order, fraction 2> fraction 3> fraction 1 and their activity was all superior to that of tocopherol at 500 ppm level. All fraction(1, 2 and 3) exhibited a strong UV absorption at 280 m which would be specifically produced by phenolic compound. UV absorption at 280 m of fraction 2 was greater than those of fraction 1 and 3. In the visible spectrum of these fractions, the maximum .absorption wavelengths of fraction 1, 2 and 3 were 660, 460 and 460 m, respectively. Antioxidant activity of barley leaves seemed to be due to the flavonoids containing phenolic group by UV spectrum and total phenol content.

• Proceedings of the KIEE Conference
• /
• 1999.07d
• /
• pp.1882-1884
• /
• 1999

The photoisomerization of functional polyimide was investigated in the various temperatures and UV(360nm) & visible(450nm) light irradiation. The absorption spectrum of azobenzene containing polyamic acid in a mixture of N,N-dimethylacetamide and benzene(1:1 by volume) solution was induced photoisomerization by UV and visible light irradiation. The absorption spectrum of LB films are also induced photoisomerization by UV and visible light irradiation.

• Proceedings of the KIEE Conference
• /
• 1991.11a
• /
• pp.333-335
• /
• 1991

${\prod}-A$ characteristics and UV-visible spectrum of N-docosylquinolium-TCNQ monolayers were investigated. ${\prod}-A$ characteristics of N-docosylquinolium-TCNQ monolayer were measured following variation. i > ${\prod}-A$ characteristics with a variation of spreading amount. ii > ${\prod}-A$ characteristics with a variation of subphase temperature. An optium surface pressure for a LB Film deposition was found to be a 30, 45 mN/m in pure water subphase(pH 5.4, $25^{\circ}C$). UV-visible spectrum Analysis of these LB film were investigated. As a result, we think two kinds of surface pressure had no effect the monolayer aggregation but monolayer density.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1993.11a
• /
• pp.137-140
• /
• 1993

Electrical properties and thermal annealing effects of $C_{22}$-quinolium(TCNQ) Langmuir-Blodgett(LB) films were studied. Typical current-voltage(I-V) characteristics along the perpendicular direction chow an anomalous behavior of breakdown near the electric-field strength of $10^{6}$V/cm. To see the thermal influence of the specimen, current was measured as a function of temperature(20∼$180^{\circ}C$). It shows that the current increases about 4 orders of magnitude near 60∼$70^{\circ}C$ and remains constant far a while up to ∼$150^{\circ}C$ and then suddenly drops. Such increase of current near 60∼$70^{\circ}C$ seems tn be related to a softness of alkyl chains. Besides the electrical measurements, UV/visible absorption(300∼800 nm) of the thermally annealed sample was measured to see the internal-structure change. It is found that there are four characteristic peaks. At 494 nm, the optical absorption of the thermally annealed specimen at $60^{\circ}C$ starts increase and stays almost constant upto∼ $140^{\circ}C$. And eventually it disappears above $180^{\circ}C$. After heat treatment of the specimen up to $150^{\circ}C$, Uv/visible absorption was measured while cooling.

• Journal of the Korean Chemical Society
• /
• v.51 no.4
• /
• pp.356-360
• /
• 2007

5,7-Diaryl-3,4,6-trihydronaphthalen-2-ones have been synthesized from 3,5-diaryl-cyclohex-2-en-1- ones and methyl vinyl ketone in the presence of sodium ethoxide. The products were characterized by IR, UV-Visible, 1H-NMR, 13C-NMR and mass spectral techniques. To confirm 1H and 13C signals, HSQC spectrum was recorded and analyzed.

• Korean Journal of Crystallography
• /
• v.1 no.2
• /
• pp.61-65
• /
• 1990

Smoky quartz was grown hydrothermally. For the establishment of the best growth condition, various growth factors, such as nutrients, seed orientations, minerlizers, colorants and irradiation times were studied. By the UV-visible spectrum analysis synthetic and natural smoky quartz were characterized. As a result, smoky quartz of 120mm L X 35mm W X 14mm T with clear color tone and minimum defect was grown.

• Journal of Environmental Science International
• /
• v.27 no.7
• /
• pp.611-620
• /
• 2018

In this study, a metal-organic framework (MOF) material $NH_2$-MIL-101(Fe) was synthesized using the solvothermal method, and characterized by X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), UV-visible spectrophotometry, field-emission scanning electron microscopy (FE-SEM), energy dispersive X-ray spectroscopy (EDS), transmission electron microscopy (TEM), and surface area measurements. The XRD pattern of the synthesized $NH_2$-MIL-101(Fe) was similar to the previously reported patterns of MIL-101 type materials, which indicated the successful synthesis of $NH_2$-MIL-101(Fe). The FT-IR spectrum showed the molecular structure and functional groups of the synthesized $NH_2$-MIL-101(Fe). The UV-visible absorbance spectrum indicated that the synthesized material could be activated as a photocatalyst under visible light irradiation. FE-SEM and TEM images showed the formation of hexagonal microspindle structures in the synthesized $NH_2$-MIL-101(Fe). Furthermore, the EDS spectrum indicated that the synthesized material consisted of Fe, N, O, and C elements. The synthesized $NH_2$-MIL-101(Fe) was then employed as an adsorbent and photocatalyst for the removal of Indigo carmine and Rhodamine B from aqueous solutions. The initial 30 min of adsorption for Indigo carmine and Rhodamine B without light irradiation achieved removal efficiencies of 83.6% and 70.7%, respectively. The removal efficiencies thereafter gradually increased with visible light irradiation for 180 min, and the overall removal efficiencies for Indigo carmine and Rhodamine B were 94.2% and 83.5%, respectively. These results indicate that the synthesized MOF material can be effectively applied as an adsorbent and photocatalyst for the removal of dyes.

• Korean Chemical Engineering Research
• /
• v.58 no.3
• /
• pp.486-492
• /
• 2020

The method for preparing a perovskite-type bismuth ferrite (BFO) photocatalyst which reacts to visible LED light and the characteristics of visible light photocatalysis were investigated. BFO was prepared according to the sol-gel method. The prepared BFO consisted mainly of BiFeO₃ structure and formed a nano-sized crystal including Bi₂₄Fe₂O₃₉ structure. The BFO nano crystallines were identified from the UV-visible diffuse reflectance spectra to absorb UV and visible light up to about 600 nm. The bandgap of the BFO determined from the diffuse reflectance spectrum was about 2.2 eV. Formaldehyde was decomposed by the photoreaction of BFO photocatalysts with the visible light LED lamps with wavelengths of 585 nm and 613 nm. The narrow bandgap of BFO led to elicit BFO photocatalytic activity in visible LED light.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1996.05a
• /
• pp.38-42
• /
• 1996

The pressure-area isotherm of monolayer at the air-water interface were obtained and the LB films were fabricated onto a quartz slides and quartz crystal by conventional Langmuir-Blodggett(LB) method. The UV absorption spectra of Langmuir-Blodggett(LB) film on quartz slides and spectrum of monolayer formed on quartz crystal have been measured. The photoisomerization of the long-chain fatty avid containing azobenzene were obtained by the application of UV and visible light. The reversibility of photoisomerization were more clear difference when the number of C$\_$n/ increased. At the pressure-area isotherms, the value of surface pressure increment were decreased when the number of C$\_$n/ increased, A surface pressure of 20mN/m was obtained as a proper one for a film deposition. The photoisomerization at LB films were also obtained by application of UV and visible light. So the LB film of long-chain fatty acid containing azobenzene has possibility to being applies to functional molecular devices such as photomemory and light switching.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.455-455
• /
• 2013

$CeO_2$ nanorings were synthesized by using a surfactant free hydrothermal method. The surface morphology, structural and optical properties of the synthesized $CeO_2$ was investigated by using scanning electron microscopy (SEM), X-ray diffraction (XRD), and ultraviolet-visible (UV) spectroscopy measurements. SEM images showed that the surface morphology of the formed $CeO_2$ appeared as nanorings. The XRD pattern of $CeO_2$ nanorings showed the presence of the polycrystalline $CeO_2$ phase readily indexed to the cubic fluorite structure of the $CeO_2$. The mean crystallite size of the $CeO_2$ was calculated using the Scherrer equation from the XRD line broadening of the (111) planes of the cubic $CeO_2$. The UV-Visible spectroscopy spectrum of the $CeO_2$ nanorings exhibited a strong UV absorption band around 350 nm.