• Korean Journal of Plant Resources
• /
• v.31 no.6
• /
• pp.652-659
• /
• 2018

In this study, baicalin, as a marker substance of Scutellariae Radix, was quantitatively analyzed by a high performance liquid chromatography-photodiode array detector (HPLC-DAD). We identified wogonoside, baicalein, and wogonin in the Scutellariae Radix by a high performance liquid chromatography-electrospray ionization-mass spectrometer (HPLC-ESI-MS). The baicalin was separated on a Xterra C18 column ($5{\mu}m$, $4.6{\times}250mm$) using mobile phase consisting of 38% acetonitrile in 0.68% phosphoric acid. The baicalin spectrum in the Scutellariae Radix extracts was coincided by comparing with UV-visible spectrum (200-550 nm) of baicalin standard in the library. The amount of baicalin in Scutellariae Radix was 10.46%, which is higher than KFDA's guideline. The marker substances of Scutellariae Radix showed a strong base peak $[M]^+$ in the positive detection mode following as; baicalin (m/z; $271[MH^+-sugar]^+$, $447[M+H]^+$), wogonoside (m/z; $285[MH^+-sugar]^+$, $461[M+H]^+$), baicalein (m/z; $271\;[M+H]^+$), wogonin (m/z; $285[M+H]^+$). These results are consistent with the fragment pattern and molecular weight of standard components from literature.

• Analytical Science and Technology
• /
• v.22 no.1
• /
• pp.65-74
• /
• 2009

Active components of lacquer tree referred to as urushiol congeners, which are catechol derivatives with various alkyl or alkenyl substituents. The olefin side chains typically have one, two or three double bonds. In this study, the each congener's ratio analysis of extracts from korean lacquer tree are compared to the one from other asian lacquer tree. Extraction was performed using liquid-liquid extraction (LLE) method with soxhlet system from tree's bark and sap. Extracts were analyzed by reverse phase liquid chromatography and on-line electro spray ionization mass spectrometry (LC-MS/MS).

• Korean Journal of Remote Sensing
• /
• v.36 no.3
• /
• pp.461-474
• /
• 2020

Korea launched Geostationary Environmental Monitoring Satellite (GEMS), a UV/visible spectrometer that measure pollution gases on 18 February 2020. Because satellite retrieval is an ill-posed inverse solving process, the validation with ground-based measurements or other satellite measurements is essential to obtain reliable products. For this purpose, satellite-based OMI and OMPS total column ozone (TCO), and ground-based Pandora TCO in Busan and Seoul were selected for future GEMS validation. First of all, the goal of this study is to validate the ground ozone data using characteristics that satellite data provide coherent ozone measurements on a global basis, although satellite data have a larger error than the ground-based measurements. In the cross validation between Pandora and OMI TCO, we have found abnormal deviation in ozone time series from Pandora #29 observed in Seoul. This shows that it is possible to perform inverse validation of ground data using satellite data. Then OMPS TCO was compared with verified Pandora TCO. Both data shows a correlation coefficient of 0.97, an RMSE of less than 2 DU and the OMPS-Pandora relative mean difference of >4%. The result also shows the OMPS-Pandora relative mean difference with SZA, TCO, cross-track position and season have insignificant dependence on those variables.In addition, we showed that appropriate thresholds depending on the spatial resolution of each satellite sensor are required to eliminate the impact of the cloud on Pandora TCO.

• 한국신재생에너지학회:학술대회논문집
• /
• 2011.11a
• /
• pp.50.2-50.2
• /
• 2011

염료감응형 태양전지는 기존의 실리콘 태양전지에 비해 저렴한 가격과 다양한 날씨 조건에서도 태양광과의 반응성이 안정하다는 여러 가지 장점을 갖고 있다. 하지만 광전 변환 효율이 기존의 실리콘 태양전지에 비해 현저히 떨어진다는 문제점과 장기적으로 안정하지 못하다는 단점을 가지고 있다. 이러한, 염료감응형 태양전지에서 크게 광전 변환 효율을 향상시킬 수 있는 재료는 염료, $TiO_2$와 같은 반도체 산화물전극 재료, 전해질이다. 이 중 $TiO_2$의 특성 및 크기는 염료감응형 태양전지의 효율에 영향을 미친다. 염료감응형 태양전지의 광전 변환 효율을 증가시키기 위해서 $TiO_2$는 넓은 비표면적, 높은 전자의 이동성 및 태양광과의 우수한 반응성을 가져야 한다. Microwave hydrothermal 방법에 의해 제조된 hollow $TiO_2$를 염료감응형 태양전지에 적용시킬 경우 기존의 $TiO_2$의 광흡수 반응이 200~400 nm 사이에서 발생하는 반면, hollow $TiO_2$의 광흡수 반응은 기존의 UV 영역인 200~400 nm 뿐만 아니라 가시광 영역인 400~460 nm 에서도 광흡수 반응이 가능하기 때문에 염료감응형 태양전지에서 광전 변환효율을 증가 시킬 수 있을 것으로 기대된다. 또한, microwave hydrothermal법에 의해 제조된 hollow $TiO_2$는 150-200 nm의 크기를 갖으며 20-30 nm 크기의 $TiO_2$ particle들로 이루어져 있다. hollow $TiO_2$ (150-200 nm)를 기존의 $TiO_2$ (10-20 nm) 층 위에 올려 염료감응형 태양전지의 electrode에 적용할 경우 기존의 $TiO_2$ 단층을 이용한 것보다 우수한 light-scattering 효과를 갖게 되어 광전 변환 효율 증가에 긍정적인 영향을 미칠 것이다. 본 연구에서는 hollow $TiO_2$의 광학적 특성 및 결정성이 염료감응형 태양전지에 미치는 영향을 조사하였다. hollow $TiO_2$의 광학적 특성 및 결정성의 변화를 위하여 microwave hydrothermal 법의 합성 온도 및 합성시간에 변화를 주었다. hollow $TiO_2$의 광학적 특성은 UV-visible spectrometer를 이용하여 조사하였으며, hollow $TiO_2$의 형상과 결정학적 특성은 TEM과 SEM 그리고 X선 회절 분석을 이용하여 관찰되었고, hollow $TiO_2$의 비표면적 측정은 BET 측정법을 이용하였다. 또한 염료감응형 태양전지 cell을 제작하여 $100mW/cm^2$(AM 1.5G) 기준에서 광전 변환 효율을 측정하였다.

• Applied Chemistry for Engineering
• /
• v.28 no.5
• /
• pp.547-553
• /
• 2017

This study focused on the difference of photocatalytic performance by the incorporation of Pd into the $TiO_2$ framework and suggested five different catalysts composed of $TiO_2$ and x mol% $Pd-TiO_2$ (x = 0.25, 0.5, 0.75, and 1.0). A typical sol-gel method was used to synthesize catalysts, and the phenol photodegradation performance of each catalysts was evaluated. The physicochemical and optical properties of catalysts were confirmed by X-ray diffraction (XRD), transmission electron microscopy (TEM), scanning electron microscopy/energy dispersive spectrometer (SEM/EDS), ultraviolet/visible spectroscopy (UV/Vis), photoluminescence spectroscopy (PL), and photocurrent measurements. With the addition of Pd ions, the band gap of catalysts was shortened and the charge separation between photogenerated electrons and holes easily also occurred. As a result, the phenol photo-destruction performance over 0.75 mol% $Pd-TiO_2$ catalyst was 3 times higher than that of pure $TiO_2$. This is believed to be due to Pd ions acted as an electron capturing function during photocatalysis.

• Journal of the Korean earth science society
• /
• v.39 no.1
• /
• pp.53-66
• /
• 2018

The information of surface reflectance ($R_{sfc}$) is important for the heat balance and the environmental/climate monitoring. The $R_{sfc}$ sensitivity to error-induced variables for the Geostationary Environment Monitoring Spectrometer (GEMS) retrieval from geostationary-orbit satellite observations at 300-500 nm was investigated, utilizing polar-orbit satellite data of the MODerate resolution Imaging Spectroradiometer (MODIS) and Ozone Mapping Instrument (OMI), and the radiative transfer model (RTM) experiment. The variables in this study can be cloud, Rayleigh-scattering, aerosol, ozone and surface type. The cloud detection in high-resolution MODIS pixels ($1km{\times}1km$) was compared with that in GEMS-scale pixels ($8km{\times}7km$). The GEMS detection was consistent (~79%) with the MODIS result. However, the detection probability in partially-cloudy (${\leq}40%$) GEMS pixels decreased due to other effects (i.e., aerosol and surface type). The Rayleigh-scattering effect in RGB images was noticeable over ocean, based on the RTM calculation. The reflectance at top of atmosphere ($R_{toa}$) increased with aerosol amounts in case of $R_{sfc}$<0.2, but decreased in $R_{sfc}{\geq}0.2$. The $R_{sfc}$ errors due to the aerosol increased with wavelength in the UV, but were constant or slightly decreased in the visible. The ozone absorption was most sensitive at 328 nm in the UV region (328-354 nm). The $R_{sfc}$ error was +0.1 because of negative total ozone anomaly (-100 DU) under the condition of $R_{sfc}=0.15$. This study can be useful to estimate $R_{sfc}$ uncertainties in the GEMS retrieval.

• Korean Journal of Materials Research
• /
• v.28 no.4
• /
• pp.254-259
• /
• 2018

General D-glass(Dielectric glass) fibers are adaptable to PCBs(Printed circuit boards) because they have a low dielectric constant of about 3.5~4.5. However, very few papers have appeared on the physical characteristics of D-glass fibers. D-glass fibers were fabricated via continuous spinning process using bulk D-glass. In order to fabricate the D-glass, raw materials were put into a Pt crucible, melted at $1650^{\circ}C$ for 2 hrs, and then annealed at $521{\pm}10^{\circ}C$ for 2 hrs. We obtained transparent clear glass. The transmittance and adaptable temperature for spinning of the bulk marble glass were characterized using a UV-visible spectrometer and a viscometer. Continuous spinning was carried out using direct melting spinning equipment as a function of the fiberizing temperature in the range of $1368^{\circ}C$ to $1460^{\circ}C$, while the winder speed was between 100 rpm and 200 rpm. We investigated the physical properties of the D-glass fibers. The average diameters of the glass fibers were measured by optical microscope and FE-SEM. The average diameters of the D-glass fibers were 21.36 um at 100 rpm and 34.06 um at 200 rpm. The mechanical properties of the fibers were confirmed using a UTM(Universal materials testing machine). The average tensile strengths of the D-glass fibers were 467.03 MPa at 100 rpm and 522.60 MPa at 200 rpm.

• Korean Chemical Engineering Research
• /
• v.52 no.4
• /
• pp.436-442
• /
• 2014

In this study, we developed an optical-fiber sensor using cobalt chloride solution to monitor temperature in real-time between long distance points unaffected by the electro-magnetic wave and the vibration. Cobalt chloride solutions were made using 10% water and 90% ethanol (v/v) solution. The transmittance of these solutions was analyzed on 655 nm using UV-Visible spectrometer regarding temperature change. Also 30.8 mM cobalt chloride solution was gelled by dissolving polyvinyl butyral and the transmittance of this was analyzed on 655 nm regarding temperature change. The results of transmittance and optical power measurement showed decrease of both transmittance and optical power with increase of temperature from 66.8% and 149.5 nW at $25^{\circ}C$ to 7.1% and 48 nW at $70^{\circ}C$, respectively. These results support the possibility of gelled cobalt chloride/polyvinyl butyral as an optical-fiber sensor to monitor temperature change.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.11a
• /
• pp.66-66
• /
• 2008

본 연구에서는 ITO/Ag/ITO 다층 박막을 유기발광소자와 플렉시블 광전소자의 전극으로 적용하기 위하여 선형 대항 타겟 스퍼터(Linear facing target sputter) 시스템을 이용하여 성막하였고, ITO/Ag/ITO 다층박막의 전기적, 광학적, 구조적 특성을 분석하였다. 선형 대항 타겟 스퍼터 시스템은 강한 일방항의 자계와 타겟에 걸린 음극에 의해 전자의 회전, 왕복 운동이 가능해 마주보는 두 ITO 타겟 사이에 고밀도의 플라즈마를 구속 시켜 플라즈마 데미지 없이 산화물 박막을 성막시킬 수 있는 장치이다. 대항 타겟 스퍼터 시스템을 이용하여 성막한 ITO 전극을 DC power, working pressure, Ar/O2 ratio 에 따른 특성을 각각 분석하였다. glass 기판위에 최적화된 ITO 전극을 bottom layer로 두고, bottom ITO layer 위에 thermal evaporation 을 이용하여 Ag 박막을 6~20nm의 조건에 따라 두께를 다르게 성막하고, Ag 박막을 성막한 후에 다시 bottom ITO 전극과 같은 조건으로 ITO 전극을 top layer로 성막 하였다. 두 비정질의 ITO 전극 사이에 매우 앓은 Ag 박막을 성막 함으로 해서 glass 기판위에 ITO/Ag/ITO 다층 박막전극은 매우 낮은 저항과 높은 투과도를 나타낸다. ITO/Ag/ITO 박막의 전기적 광학적 특성을 보기 위해 hall measurement와 UV/visible spectrometer 분석을 각각 진행하였다. ITO/Ag/ITO 다층 박막 전극이 매우 얇은 두께임에도 불구하고 $4\Omega$/sq.의 낮은 면저항과 85%의 높은 투과도를 나타내는 이유는 ITO/Ag/ITO 전극 사이에 있는 Ag층의 표면 플라즈몬 공명 (SPR) 현상으로 설명할 수 있다. ITO/Ag/ITO 전극의 Ag의 거동을 분석 하기위해 FESEM분석과 synchrotron x-ray scattering 분석을 하였다. ITO/Ag/ITO 전극의 Ag층이 islands의 모양에서 연속적으로 연결되는 변화과정 중에 SPR현상이 일어남을 알 수 있다. 여기서, 대항 타겟 스퍼터 시스템을 이용하여 성막한 ITO/Ag/ITO 다층박막을 OLED 또는 inverted OLEDs의 top 전극으로의 적용 가능성을 보이고 있다.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.06a
• /
• pp.66-66
• /
• 2008

Most of the properties of ITO films depend on their substrate nature, deposition techniques and ITO film composition. For the display panel application, it is normally deposited on the glass substrate which has high strain point (>575 degree) and must be deposited at a temperature higher than $250^{\circ}C$ and then annealed at a temperature higher than $300^{\circ}C$ in order to high optical transmittance in the visible region, low reactivity and chemical duration. But the high strain point glass (HSPG) used as FPDs is blocking popularization of large sizes FPDs because it is more expensive than a soda lime glass (SLG). If the SLG could be used as substrate for FPDs, then diffusion of Na ion from the substrate occurs into the ITO films during annealing or heat treatment on manufacturing process and it affects the properties. Therefore proper care should be followed to minimize Na ion diffusion. In this study, we investigate the electrical, optical and structural properties of ITO films deposited on the SLG and the Asahi glass(PD200) substrate by rf magnetron sputtering using a ceramic target ($In_2O_3:SnO_2$, 90:10wt.%). These films were annealed in $N_2$ and air atmosphere at $400^{\circ}C$ for 20min, 1hr, and 2hrs. ITO films deposited on the SLG show a high electrical resistivity and structural defect as compared with those deposited on the PD200 due to the Na ion from the SLG on diffuse to the ITO film by annealing. However these properties can be improved by introducing a barrier layer of $SiO_2$ or $Al_2O_3$ between ITO film and the SLG substrate. The characteristics of films were examined by the 4-point probe, FE-SEM, UV-VIS spectrometer, and X-ray diffraction. SIMS analysis confirmed that barrier layer inhibited Na ion diffusion from the SLG.