• The Research Journal of the Costume Culture
• /
• v.11 no.6
• /
• pp.967-971
• /
• 2003

As the concerns over health increased in 1990's, research and development on the health material were also activated. The development of UV-cut textile became the hot issue, because the damage of W irradiation due to ozone depletion has become widely known. UV-cut effect is determined by the material, the color, the organization and the density of UV-cut fibers. UV-cut effect is very different according to the fibers. Polyester is known to have a better effect. Even in the same textile material, staple fiber has more effect than filament fiber. Different colors have different offsets. Although textiles have the same color, the effects can be different according to the depth of color. PET, PET/cotton blend, nylon and cotton fabrics were ultraviolet cutting finished with padding method using several absorbers. These UV-cut effect can be improved through the processing. Safety of UV-cut textile for the body must be considered future, Until now the figure of the UV-cut effects has been emphasized. There has been no experiment on the human body, although the textiles are directly on the human body. Futhermore there os no safety standard of UV-cut textiles. Therefore every effort will be made to set the standard UV-cut processing is established. The need of UV-cut products will be known to the consumers.

• Journal of Korean Ophthalmic Optics Society
• /
• v.6 no.1
• /
• pp.107-110
• /
• 2001

In order to estimate the UV-A line's cut efficiency it lens, it was measured the light transmittance in the 320~400nm wavelength regions. We obtained the area to integrate the light transmittance of standard CR-39 and sample in the 320~400nm wavelength regions and established ${\alpha}$, ${\beta}$ of UV-A line's cut efficiency by contrast its area. We obtained the absolute cut efficiency ${\alpha}$ CR=0.59 value of CR-39 Lens, and if ${\alpha}$ was the absolute cut efficiency value of the lens to estimate UV-A cut effect, the relative cut efficiency ${\beta}$ was $1.69{\alpha}$. It was obtained the absolute and the relative UV exclusion index through each $a=(1-{\alpha}){\times}100%$, $b=(1-{\beta}){\times}100%$.

• Journal of Korean Ophthalmic Optics Society
• /
• v.7 no.2
• /
• pp.129-134
• /
• 2002

We obtained the UV cut-off effect of tinted CR-39 Ophthalmic lens with the respect of concentration of green, brown, blue color. First, we analyzed the UV spectrum of tinted CR-39 lens measured by Spectrophotometer and then compared the UV data by Spectrophotometer with UV data by UV tester used in an optician shop. The result obtained show that the UV cut-off effect is increased with color concentration of tinted CR-39 lens, and the transmittance of 0%~5% at 400nm by Spectrophotometer is correspondence with transmittance of 0% by UV tester.

• Textile Coloration and Finishing
• /
• v.14 no.4
• /
• pp.223-228
• /
• 2002

Cotton fabric was treated with $TiO_2$-PEG600 dispersion colloid by pad-dry-cure and wet-fixation process to improve the performance properties as well as UV-cut effect. As the concentration of $TiO_2$/PEG increased tensile strength, crease resistance, stiffness of treated cotton fabric increased. Application of wet-fixation method provided a further improvement in tensile strength, crease resistance, stiffness of treated cotton fabric. Cotton fabric treated with $TiO_2$/PEG was more efficient in UV-cut property than untreated cotton.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.25 no.5
• /
• pp.925-932
• /
• 2001

The influence of ultraviolet(UV)-ray in sun light on human skin has been noted. Textiles can provide protection against harmful UV-radiation. Normally UV-absorbing finishes are used to get better protection. The purpose of this study is to evaluate the UV-cut properties of cotton fabrics treated with UV-absorber. 2,2-dihydroxy-4,4-dimethoxbenzophenone, as UV-absorber was applied to 100% cotton fabric. Reagents added in finishing solution were Triton X-100, polyethylene glycol 400, and $MgCl_2{\cdot}6H_2O$, and C.I. Direct Red 81. Both untreated and treated cotton fabrics were exposed to a xenon arc lamp for 20 and 80 hours. UV absorption spectra of finishing solutions and UV transmission spectra of fabrics were measured by the UV/VIS spectrophotometer. The results of this study can be summarized as follows. The results of this study can be summarized as follows. Absorption and the related transmission spectra were modified in a controlled way with UV-absorber. Absorption effect of UV-absorber was improved by adding Triton X-100, PEG 400, and $MgCl_2{\cdot}6H_2O$ in finishing solution. The UV absorption of finishing solution was in the following order: U/D/T/P/M>D/T/P/M> D/T> D/P, D>U/T/P/M>U/T>T/P/M>T. The UV transmittance of cotton fabrics was remarkably decreased by the application of UV-absorber and additives. The UV-cut properties were most improved by the application of U/D/T/P/M.

• The Journal of the Korea Contents Association
• /
• v.11 no.5
• /
• pp.205-215
• /
• 2011

Films are sensitive to ultraviolet rays and in contrast, digital camera sensors are extremely sensitive to infrared rays due to the differences in spectral characteristics. As a result, all digital cameras that use CCD or CMOS are equipped with IR Cut-Off Filter on the overall sensor. Complete block out of infrared rays is ideal, but the actual experiment results showed that infrared rays were not being blocked out completely. Infrared permeability was also different for each camera. Therefore, this study aims to analyze the effect of the minute quantities of infrared rays, which get transmitted due to mechanical properties of IR Cut-Off Filters that are installed on digital cameras, on digital picture images. The results obtained by carrying out a comparative analysis of a UV Filter (infrared transmitting state) and a UV-IR Filter (infrared blocked out state) are as follows. It was confirmed that the minute quantities of infrared rays do affect dynamic range and resolution to some extent, despite the little or no difference in noise and color reproduction.

• Journal of Korean Ophthalmic Optics Society
• /
• v.6 no.2
• /
• pp.17-21
• /
• 2001

We analyzed the luminance in the visual light region and the size of pupil by the luminance to estimate an UV-A line cut efficiency in the lens. The size of pupil by the luminance(L) was given by ${\Phi}=d-e{\cdot}tanh(f{\cdot}logL)$ and the transmittance efficiency value of a size of pupil was given by $T_r(r)=1-gr^2+hr^4$. We derived the absolute cut efficiency value ${\alpha}$ and the exclusion index $b=(1-{\alpha}){\times}100%$ about the UV-A in the $320{\sim}400nm$ regions. The ${\alpha}$ and b values were obtained respectively 0.018, 0.31, 0.273, 0.153 and 98, 69, 72, 85% of Uv-cut Lens, CR-39, red color and blue color.

• Journal of Marine Bioscience and Biotechnology
• /
• v.7 no.2
• /
• pp.52-57
• /
• 2015

The purpose of this study was to investigate a relationship between ultraviolet radiation and initial cell density (ICD) of microalgae using a floating marine photobioreactor (PBR). To examine the effect of ultraviolet (UV) radiation in sunlight on biomass productivity as a function of ICD, 0.5-L floating PBRs covered with or without UV cut-off film were placed in an outdoor rectangular tank containing 200 L of water. At the lower ICDs, 0.01 and 0.05 g/L, biomass productivities in the PBRs without UV cut-off film decreased by $278{\pm}21%$ and $222{\pm}3%$ compared with those with the film, respectively. In contrast, the presence of UV cut-off film did not have a significant effect on biomass productivities at the higher ICDs, 0.25 and 1.25 g/L. When the differences in biomass productivity made by the UV cut-off film were plotted against the sum of cell projection area per light receiving area of the PBR, the results revealed that the inhibitory effect of UV on biomass productivity can be negligible when the sum of cell projection area is equal to the light receiving area of the PBR. These results show that photoinhibition caused by UV radiation could be eliminated via operating the PBR with a proper ICD.

• Proceedings of the KAIS Fall Conference
• /
• 2010.05b
• /
• pp.1112-1114
• /
• 2010

대기 영역을 통과한 UV는 인간과 자연 환경 및 재료 등의 합성 물질에 대해 심각한 피해를 유발할 수 있다. 폭발과 산처리된 나노 다이아몬드 표면의 곁가지 결합인 $Sp^2$ 결합체 내의 알킬기에 의한 광흡수 및 산란으로 UV을 차단할 수 있다. 본 연구에서는 폭발 및 산처리 다이아몬드와 나노급 흑연의 농도, 조성에 따른 수용성 현탁액에 의한 차외선 차단 효과를 조사하였다.

• Fashion & Textile Research Journal
• /
• v.12 no.5
• /
• pp.667-675
• /
• 2010

This research did chistosan and cation treatment to raise K/S vlue. In this result, chitosan 1%, cation 4% treatment showed the highest K/S value. Gilycyrrhizae radix dyeing showed the highest K/S value in pH3, pre-mordant, $30^{\circ}C$, 80 min.. Its color Y, YR. K/S value over 2.5 times showed in chitosan treatment fabrics, 5 times in cation treatment fabrics than cotton fabrics on the condition of none-mordant ones. In the antibacterial activity, staphylococus showed 99.9% in all fabrics. Klebsilla Pneumonia also showed 97.1% in chitosan treatment fabrics and it showed 99.9% in other all fabrics. In the deodorization and UV-cut effect, the more K/S value and the larger effect was showed.