• 접착 및 계면
• /
• 제20권4호
• /
• pp.140-145
• /
• 2019

환경적 관점에서 고분자필름이나 코팅제 산업계에서 이산화탄소와 휘발성 유기화합물의 저감은 가장 중요한 이슈 중의 하나이다. 광경화 시스템은 용제를 사용치 않아 휘발성 유기화합물의 방출을 최소화 할 수 있고 빠른 경화로 인한 에너지 소모가 적은 잇점이 있다. 또한, 생분해성 고분자는 거대한 폐플라스틱의 발생을 고려하면 환경적으로 경제적으로 많은 관심을 받고 있다. 따라서 본 연구에서는 생분해성 고분자인 폴리락타이드 다이올과 폴리에틸렌 글리콜을 폴리올로하여 광경화형 폴리우레탄 아크릴레이트를 합성하였고 자외선에 의해 말단의 아크릴레이트 그룹의 경화반응을 진행하였다. 경화된 필름의 인장강도, 파단율 및 Tg는 폴리락타이드 다이올의 함량 증가와 더불어 증가하였고 친수특성과 열정안정성은 폴리에틸렌 글리콜 함량과 비례하였다. 따라서 친환경적인 폴리올의 함량 조절로 광경화 폴리우레탄 아크릴레이트의 물성이 조절 가능하였다.

• 한국염색가공학회지
• /
• 제11권4호
• /
• pp.1-7
• /
• 1999

Urethane-acrylate propelymers for secondary coating of optical fiber and high - performance material were prepared from the 4,4'-diphenylmethane diisocyanate(MDI), poly(tetramethylene oxide)glycol(PTMG, Mw 650 or 1000), 1,6-hexanediol(HD), 2-hydroxyethyl acrylate(HEA), and dibutyltin dilaurate as a catalyst. UV-Curable polyurethane acrylates were formulated from the urethane-acrylate prepolymers, three types of reactive diluents(DTs) having mono-, di-, and trifunctional-phenoxyethyl acrylate(PEA), hexanediol diacrylate(HDDA), and trimethylolpropane triacrylate(TMPTA), and 1-hydtoxycyclohexyl phenyl ketone(Irgacure 184) as a photoinitiator. The UV-cured films of polyurethane acrylates were obtained by curing using a medium-pressure mercury lamp(U W/cm, $\lambda_{max}=365\;nm)$. In this work, the effects of molecular weights of polyol and diol with low molecular weight into polymer chain on mechanical and dynamic mechanical properties of UV-cured polyurethane acrylates were studied. The structure and properties of the films obtained from the UV photopolymerization of urethane-acrylate prepolymer were investigated by FT-IR spectroscopy, dynamic mechanical measurement, tensile testing, and X-ray diffractometry.

• 청정기술
• /
• 제23권2호
• /
• pp.148-157
• /
• 2017

To prepare UV-curable polyurethane-acrylate oligomer, NCO-terminated urethane prepolymers with trimethylolpropane, [TMP; 0 (0), 0.1 (0.021) and 0.2 (0.043) mole (mole fraction)] as crosslinkable tri-functional chain extender were end-capped with pentaerythritol triacrylate [PETA; 2.0 (0.400), 1.7 (0.354) and 1.4 (0.304) mole (mole fraction)] with one hydroxyl group/three vinyl functionalities. The stable as-formulated UV-curable polyurethane-acrylates [stable mixtures of PETA-capped oligomer/reactive acrylic monomer diluents without/with heptadecafluorodecyl methacrylate (PFA; 0, 6 and 9 wt%)] were formed up to 0.2 (0.043) mole (mole fraction) of TMP content in the prepolymer, while homogeneous-mixing failed at 0.3 (0.068) mole (mole fraction), in which the crosslink density in NCO-terminated urethane prepolymer was too high to enable the formation of stable mixture. This study examined the effect of TMP/PETA molar ratio and heptadecafluorodecyl methacrylate (PFA) content (wt%) on the properties of UV-cured polyurethane-acrylates as marine antifouling coating materials. The properties of UV-cured polyurethane-acrylate were found to be significantly dependent on the crosslinkable TMP/PETA ratio and PFA content. With the increasing of the TMP and PFA contents, the contact angles increased, and consequently the surface tension decreased. The adhesion of algae/barnacles to PFA contained film samples were found to be sufficiently weak to allow their easy removal. These results suggest that the UV-cured samples containing PFA have strong potential as coating materials for antifouling applications.

• 한국산학기술학회논문지
• /
• 제11권5호
• /
• pp.1773-1777
• /
• 2010

광경화(UV-curing)에 의한 PVC 바닥상재 코팅기술은 PVC 바닥상재 질의 개선을 위하여 사용되는 것이다. 본 연구에서 사용한 폴리우레탄 아크릴레이트 수지는 반응성 모노머, 광개시제, 그 외 첨가제를 배합하여 제조하였고, 올리고머는 상용화된 지방족 우레탄 아크릴레이트를 사용하였다. 제조한 코팅액을 바코팅(bar-coating) 방법으로 PVC 바닥상재에 코팅한 후 광경화법을 이용하여 상재표면에 코팅층을 형성하였다. 코팅에 사용된 코팅액은 FTIR로 측정하여 특성을 확인하였으며, PVC 상재 표면에 형성된 코팅층의 물성은 광택과 부착력으로 평가하였다. 코팅층의 물성은 코팅조성과 공정조건에 영향을 받았다.

• Fibers and Polymers
• /
• 제2권3호
• /
• pp.141-147
• /
• 2001

The effect of compositions of isophorone diisocyanate (IPDl)/4.4'-diphenylmethane diisocyalate (MDI) and polypropylene oxide diol (PPG, $M_w$: 3000)/1,4-butane diol (BD) on the properties of UV-cured polyurethane acrylate films based on 2-hydroxyethyl acrylate (HEA) was examined. UV-curable polyurethane acrylates were formulated from the prepolymer. trimethylol propane triacrylate (TMPTA) as a reactive diluent, and 1-hydroxycyclohexyl ketone (Irgacure 184) as a photoinitiator. Dynamic mechanical thermal properties and elastic properties of UV-cured polyurethane acrylates was fecund to depend on the chemical composition of IPDl/MDl and PPG/BD. As the BD content increased, the tensile storage modulus of all series samples increased significantly. The storage modulus increased in the order of samples A (IPDI based samples)> samples B (IPDI/MDl (7/3 molar ratio) based samples) > samples C (IPDI/MDl (5/5 molar ratio) based samples at the same composition. Two distinct louts modulus peaks for all samples are observed owing to the softs segment glass transition temperature ($T_gh$) and hard segment glass transition temperature ($T_gh$). The difference between $T_gh$, and $T_gh$, (Δ$T_g$) increases in the order of A > B > C at the same composition. In cycle test, the initial onset strain (%) was found to decrease with increasing BD content in PPG/BD and with increasing MDI content in IPDI/MDl.

• 한국산학기술학회:학술대회논문집
• /
• 한국산학기술학회 2009년도 추계학술발표논문집
• /
• pp.80-83
• /
• 2009

Application of UV curing technique for poly vinyl chloride (PVC) floor tiles coating has improved the quality of PVC floor. Various formulations including acrylated oligomers based on a polyurethane were blended with reactive monomers, photoinitiators and other additives. The used oligomers are commercial aliphatic urethane acrylates. Thin films were prepared on PVC tiles by bar coating with different formulations using UV radiation. The coating resins were characterized by FTIR. The properties of UV-cured films such as gloss grade and adhesion were examined. The properties of UV-cured films dependent on the influence of composition and processing conditions was studied. The investigation was conducted to achieve an optimal domain of composition and desired coating effect.

• Fibers and Polymers
• /
• 제2권3호
• /
• pp.122-128
• /
• 2001

UV-curable polyurethane acrylate prepolymers were prepared from diisocyanates [isophorone diisocyanate (IPDI), 2,4-toluene diisocyanate (TDI), or 4,4'-dicyclohexylmethane diisocyanate (H$_{12}$MDI)], diols [ethylene glycol (EG), 1,4-butane diol (BD), or 1,6-hexane diol (HD)], polypropylene glycol as a polyol. UY-curable mixtures were formulated from the prepolymer (90 wt%), reactive diluent monomer trimethylol propane triacrylate (10 wt%). and photoinitiator 1-hydroxycy-clohexyl ketone (3 wt% based on prepolymer/diluent). The effects of different diisocyanates/low molecular weigh dial on the dynamic mechanical thermal properties and elastic recovery of UV-cured polyurethane acrylate films were examined. The tensile storage modulus increased a little in the order of EG > BD > HD at the same diisocyanate. Two loss modulus peaks for all samples are observed owing to the glads transition of softs segments ($T_gh$) and the glass transition temperature of hard segments ($T_gh$). For the same diisocyanate, $T_gh$, decreased, however, $T_gh$ increased, in the order of HD > BD > EG. The elastic recovery also increased in the order of HD > BD > EG at the same diisocyanate. In case of same diols, $T_gh$ increased in the order of $H_12$MDl > TDI > IPDI significantly. The ultimate elongation and elastic recovery increased in the order of TDI > IPDI > $H_12$MDl at the same diol.l.

• 접착 및 계면
• /
• 제18권4호
• /
• pp.159-165
• /
• 2017

본 연구에서는 반응성 희석제로 사용되는 BA의 함량에 따른 자외선 경화형 폴리우레탄 아크릴레이트 수지를 제조하여 수지의 열적 기계적 성질, 접착강도, 굴곡성을 확인하였다. BA의 함량이 40% 이상으로 증가할수록 Polyol의 Tg와 아크릴 수지의 Tg가 분리되어 나타난 것을 DSC로 통해 확인하였다. 또한 BA의 함량이 증가할수록 아크릴 수지의 낮은 기계적인 물성이 주도적으로 발현되어 인장강도와 신장률, 접착강도가 감소하는 것으로 나타났다. 굴곡성을 평가한 결과 BA의 함량이 40%인 경우 경도가 낮으면서 다른 수지에 비해 Tm이 낮아 굴곡성이 우수한 것으로 나타났다.

• 접착 및 계면
• /
• 제23권4호
• /
• pp.137-143
• /
• 2022

본 연구에서는 신발 및 의류용 접착제로 접착력과 굴곡성이 우수한 폴리우레탄 아크릴레이트 수지를 합성하기 위하여 폴리에스테르 폴리올인 poly(tetramethylene adiphate glycol) (PTAd)와 폴리에테르 폴리올인 poly(tetramethylene ether glycol) (PTMG)를 4,4'-methylene diphenyl diisocyanate (MDI), isophorone diisocyanate (IPDI), 1,4-butandiol (1,4-BD), 2-ydroxyethyl methacrylate (2-HEMA), dibutyl amine (DBA)와 함께 사용하여 폴리우레탄 아크릴레이트를 합성하였으며, 폴리올을 병용한 폴리우레탄 아크릴레이트의 열적·기계적 특성, 접착력 및 굴곡성을 검토하였다. 합성된 폴리우레탄 아크릴레이트의 유리전이온도는 -70~-40 ℃ 범위로 확인되었으며, PTAd 함량이 증가함에 따라 유리전이온도, 분해온도, 인장강도, 접착력 및 내열성이 증가하였고 반대로 신장률, 내수성 및 굴곡성은 감소되었다. 합성된 폴리우레탄 아크릴레이트는 PTAd와 PTMG 비율이 5:5일 때 높은 접착력과 굴곡성을 나타내었다.