• Applied Chemistry for Engineering
• /
• v.19 no.6
• /
• pp.661-667
• /
• 2008

In this study, cholesteric liquid crystal (CLC) was synthesized and applied as a polarizing component on the optical film of back light units (BLU) for LCDs. After mixing CLC with nematic liquid crystal, this mixture was fulfilled in the module consisting of two films and then its amplifying efficiency and polarizing ability for a planarly emitted light were examined to apply as a BLU polarizer film for increasing the brightness of light. The properties of CLC compound were tested by UV/Visible spectroscopy and polarizing optical microscopy (POM). Flexible spacer was made by linear carboxylic acid group of cholesteric derivatives between cholesterol mesogen units for one-axis orientation in each layer. The CLC containing film could be used as a module to increase the ability of polarization and to enhance brightness of BLU and to widen wavelength range by stacking the films.

• Applied Chemistry for Engineering
• /
• v.28 no.2
• /
• pp.245-251
• /
• 2017

In this study, ZnO, which is widely known as a non $TiO_2$ photocatalyst, was synthesized using coprecipitation method and Ag was added in order to improve the catalytic performance. The physicochemical characteristics of the synthesized ZnO and Ag/ZnO particles were checked using X-ray diffraction (XRD), UV-visible spectroscopy, scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDS), photoluminescence (PL), and photocurrent measurements. The performance of catalysts was tested by $H_2$ production using the photolysis of $H_2O$ with MeOH. By adding Ag which plays a role as an electron capture on the ZnO catalyst, the performance increased due to the recombination of excited electrons and holes. In particular, $8.60{\mu}mol\;g^{-1}$ $H_2$ was produced after 10 h reaction over the 0.50 mol% Ag/ZnO.

• Journal of the Korean Vacuum Society
• /
• v.7 no.4
• /
• pp.361-367
• /
• 1998

$\alpha$-Sexithiophene ($\alpha$-6T) thin films were deposited by organic molecular beam deposition (OMBD) technique. The $\alpha$-6T was synthesized and purified by the sublimation method. The thin films of the $\alpha$-6T were deposited under various deposition conditions. The effects of deposition rate, substrate temperature, and vacuum pressure on the formation of these films have been studied. The molecular orientation, crystallinity, and surface morphology of $\alpha$-6T films were investigated with angle-resolved UV/visible absorption spectroscopy, X-ray diffractometry (XRD), and atomic force microscopy (AFM). It was found that the crystalline structure of $\alpha$-6T films was monoclinic and independent uppon substrate temperature, deposition rate, and deposition pressure. On the other hand, the $\alpha$-6T molecules in the film deposited at a low deposition rate, higher substrate temperature, and under a high vacuum tended to be aligned perpendicular to the substrate.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.19 no.5
• /
• pp.251-255
• /
• 2009

Nanocomposites based on coupling $TiO_2$ matrix with nanosized noble metals (Pt,Au) particles exhibited promising photoelectrode properties. The $M/TiO_2$ (M=Pt,Au) nanocomposite thin films were deposited on quartz and ITO glass substrates using a co-sputtering method. $TiO_2$ in rutile form is the dominant crystalline phase for as-deposited nanocomposite films. Along with heat treatment up to $600^{\circ}C$, XRD peaks of the rutile phase as well as those of noble metal increased in intensity and decreased in width, indicating the growth of crystallites. The anodic photocurrents of $M/TiO_2$ (M=Au,Pt) thin films were observed not only in the UV range but also in the visible light range. The photocurrent of the nanocomnosite films extended to the visible light region by dispersion of nano-sized noble metal in the $TiO_2$ matrix.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.290.2-290.2
• /
• 2014

본 연구에서는 스핀코팅방법으로 증착된 ZnO 박막의 Zn-seed 층 열처리에 따른 구조적 광학적 특성에 관한 연구를 수행하였다. ZnO 박막을 증착하기 전, Quartz 기판에 열증착법으로 Zn-seed층을 증착하였고, furnace에서 300, 350, 400, $450^{\circ}C$의 온도로 1시간 동안 열처리하였다. ZnO 박막은 스핀코팅방법으로 5층을 증착한 후, $600^{\circ}C$에서 1시간 동안 후열처리를 하였다. X-ray diffractometer, UV-visible spectrometer, Photoluminescence를 이용하여 ZnO 박막의 구조적, 광학적 특성을 분석하였다. 모든 ZnO 박막 시료에서 c-축 배향성을 나타내는 강한 ZnO(002)피크와 ZnO(100), ZnO(101) 회절피크가 나타났고, wurtzite 형태의 ZnO 박막이 관찰되었다. Zn-seed층을 $350^{\circ}C$에서 열처리함에 따라 deep-level emission 피크에 대한 near-band-edge emission 피크의 발광세기 비율이 증가하였으나, 온도가 증가함에 따라 점점 감소하였다. 또한, Zn-seed층을 $350^{\circ}C$에서 열처리 하였을 때 가장 높은 광 투과도를 나타내었다.

• Applied Chemistry for Engineering
• /
• v.1 no.2
• /
• pp.140-146
• /
• 1990

Polydimethylsiloxane(PDMS) containing [N, N'-bis (3- (salicylidene amino) propyl) amine Co(II)] (Co(saldpt)) as a fixed oxygen carrier was synthesized. UV-visible spectra of the membrane demonstrated that Co(saldpt) binded molecular oxygen specificaaly and reversibly. From time lag method experiment, it was found that both oxygen permeability and diffusibity increase with decreasing upstream pressure, while solubility maintain nearly constant. The maximum oxygen permeability and oxygen selectivity over nitrogen obtained was 18.6 barrer and 4, respectively, at 25 mmHg and $40^{\circ}C$ from the the PDMS membrane containing 1 wt% of Co(saldpt). Facilitation behavior was explained in terms of the dual sorption model.

• Korean Journal of Veterinary Service
• /
• v.28 no.3
• /
• pp.203-213
• /
• 2005

Oxytetracycline, tetracycline, chlortetracycline and doxycycline in honey were separated by solid phase extraction (SPE) and determined with high performance liquid chromatography (HPLC) with UV/Visible detector. Analysis was carried out using following conditions: XTerra $C_8$ column $(3.9\times150mm\;i.d. 5{\mu}m)$, mobile phase composed of 0.01M oxalic acid : methanol : acetonitrile (820 : 80 : 100, v/v/v), isocratic pump at a flow rate of 0.9 ml/min. and $50{\mu}l$ of injection volume, UV/Visible detector with wavelength of 360nm. The calibration curves of four tetracyclines showed linearity $(\gamma^2>0.999)$ at concentration range of $100\~1,000 ng/ml$. The recoveries in fortified honey represented more than $70\%$ with low coefficient of variation $(<10\%)$ for concentration range of four tetracyclines. The detection limits for oxytetracycline, tetracycline, chlortetracycline and doxycycline were 13.8, 14.6, 26.2 and 24.9ng/g in acacia honey. respectively. We also monitored tetracyclines residue in domestic honey [n : 38, acacia (20), wild flower (18) ] and foreign honey [n=22, legally distributed (13), illegally distributed (9)] using modified Charm II screening and HPLC confirmation methods. Seven of the 60 samples $(11.7\%)$ were suspect positive using modified Charm II screening test. Chlortetracycline residue was found in one foreign honey (illegally distributed) tested at concentrations of 0.22 ppm. Conclusively, for more effective control of tetracyclines used in beekeeping should be further survey for residues in honey and also national guidelines (maximum residue limit : MRL) and methods should be obligatory.

• Applied Chemistry for Engineering
• /
• v.27 no.5
• /
• pp.483-489
• /
• 2016

Here, we examined the photo-degradation efficiency of $Cu_2Se$-graphene nanocomposites synthesized by a facile and fast microwave-assisted technique. The prepared composites were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), Raman spectroscopy, XPS and UV-Vis spectrophotometry. The photocatalytic performance was studied through the decomposition of Rhodamine (Rh B) as a standard dye under visible light radiation. A 95% of Rh B degradation after visible light irradiation for 180 min indicates that the $Cu_2Se$-graphene composite exhibited significant photodegradation efficiency. Therefore, it can be concluded that the synthesized $Cu_2Se$-graphene can be used as a suitable catalyst for decomposing dye pollutants.

• Polymer(Korea)
• /
• v.35 no.1
• /
• pp.60-65
• /
• 2011

In order to maximize the performance of polymer nano-composites, it is essential to understand an effect of a dispersion state on material properties as well as to achieve highly dispersed composites. In this work, a simple quantitative approach to evaluate the degree of dispersion was suggested for carbon nanotube (CNT) embedded polymer nano-composites. Through UV-visible spectroscopy analysis, the transmittance of nano-composites was measured at various dispersion states and it was found that the transmittance reduced as the dispersion state of CNT improved. Based on the results, an effective concentration factor for quantitative evaluation of dispersion state was introduced into the Beer-Lambert transmittance law. The proposed method and parameter to evaluate the degree of dispersion were verified by analyzing the transmittances at different dispersion states of CNT, concentrations of CNT and sample thicknesses.

• Korean Journal of Food Science and Technology
• /
• v.25 no.3
• /
• pp.214-219
• /
• 1993

Properties of the antioxidative fraction isolated from browning reaction product (BRP) that were obtained from 2 M L-ascorbic acid (AsA) solution (adjusted to pH 7.0) by heating for 25 hrs at $85^{\circ}C$ were investigated. Both of dialyzable and nondialyzable fraction isolated from BRP showed antioxidative effect. Dialyzable fraction has stronger antioxidative activity than nondialyzable. Dialyzable fraction was divided into the three fractions (A, B, C) by gel filtration. Among these fractions, the fraction (A) that had the highest reducing power and lowest browning drgree had lowest antioxidative activity. The fraction (C) that had lowest reducing power and highest browning degree showed strongest antioxidative effect. In the UV-visible spectrum of these fractions, the maximum absorption wavelengths of fraction A and B were 266.1 and 257.4nm, respectively, and fraction C showed a weaker absorption peak at 274.8nm. Infrared (IR) spectrum results showed that all fractions (A, B, C) had both hydroxy and carboxylic groups, and fraction B and C had carboxylic ester group.