• 한국펄프종이공학회:학술대회논문집
• /
• 한국펄프종이공학회 2006년도 PAN PACIFIC CONFERENCE vol.1
• /
• pp.137-140
• /
• 2006

This paper describes a technique combining chemometrics with UV spectroscopy for the determination of the concentra tions of two tissue additives (i.e., wet strength and softening agents) in a cellulose fiber containing solution. In single as ent solutions, the concentration of the additive can be measured by UV spectroscopy at the wavelength where the species having absorption. For a binary (i.e., containing two additives) solution system, the spectral characterization is very complicated. However, if aided by a chemometrical calibration technique, each additive in the binary solution can be quantified simultaneously. The present method is very rapid and simple, it can easily perform a continuous measurement in the changes in the additives' concentration after fiber addition, and therefore this becomes a valuable tool for the adsorption kinetics study of chemical additives onto the cellulose fibers. The time-dependent adsorption behaviors of the wet-strength, softening agent, and their both on fiber were also presented.

• 한국패류학회지
• /
• 제24권3호
• /
• pp.243-251
• /
• 2008

진주의 감별기법상 UV-Vis의 흡수 스펙트럼 분석과 반사율 분석은 흑진주의 색깔이 자연 그대로인지 아니면 처리에 의한 결과인지를 구별하는데 중요한 요소가 된다. 또한 ED-XRF을 이용한 미량 원소 분석은 진주가 해수산인지 담수산인지 여부와 은염 또는 염색 처리 유무를 판단하는데 이용될 수 있다. 본 연구에서는 은염 또는 염색 처리되지 않은 여러 종류(담수양식진주, 아코야양식진주, 타히티흑양식진주)의 진주에 은염처리를 한 결과, 은 이온 고유의 스펙트럼이 진주 고유의 스펙트럼에 영향을 주어 UV-Vis흡수 스펙트럼이 변화되었다. 또한 반사율도 은염처리하기 전보다 낮아짐을 알 수 있었다. 특히 자연 색상의 타히티흑양식진주의 경우 400 nm, 500nm, 700 nm의 고유 흡수 스펙트럼을 갖고 있었으며, 자연색상의 담수흑양식진주의 경우 380-400 nm, 480-500 nm 두 개의 특징적인 흡수 스펙트럼으로 나타났다. 자연 색상의 담수흑진주에서는 자연 색상의 타히티흑진주와는 달리 700nm의 흡수 스펙트럼이 관찰되지 않았다. 직접 은염처리한 진주 9 개를 ED-XRF를 이용하여 분석한 결과, 처리시간이 증가함에 따라 진주 층에 침투된 은의 함량이 점차로 증가했음을 알 수 있었다. 또한 시중에서 구입한 흑진주 18 개를 분석한 결과, 은 이온의 상대 함유량이 약 0.1%를 경계로 은염 또는 염색 처리 여부를 판단하는 데 도움을 줄 수 있을 것으로 생각되었다.

• 한국의류학회지
• /
• 제25권5호
• /
• pp.925-932
• /
• 2001

The influence of ultraviolet(UV)-ray in sun light on human skin has been noted. Textiles can provide protection against harmful UV-radiation. Normally UV-absorbing finishes are used to get better protection. The purpose of this study is to evaluate the UV-cut properties of cotton fabrics treated with UV-absorber. 2,2-dihydroxy-4,4-dimethoxbenzophenone, as UV-absorber was applied to 100% cotton fabric. Reagents added in finishing solution were Triton X-100, polyethylene glycol 400, and $MgCl_2{\cdot}6H_2O$, and C.I. Direct Red 81. Both untreated and treated cotton fabrics were exposed to a xenon arc lamp for 20 and 80 hours. UV absorption spectra of finishing solutions and UV transmission spectra of fabrics were measured by the UV/VIS spectrophotometer. The results of this study can be summarized as follows. The results of this study can be summarized as follows. Absorption and the related transmission spectra were modified in a controlled way with UV-absorber. Absorption effect of UV-absorber was improved by adding Triton X-100, PEG 400, and $MgCl_2{\cdot}6H_2O$ in finishing solution. The UV absorption of finishing solution was in the following order: U/D/T/P/M>D/T/P/M> D/T> D/P, D>U/T/P/M>U/T>T/P/M>T. The UV transmittance of cotton fabrics was remarkably decreased by the application of UV-absorber and additives. The UV-cut properties were most improved by the application of U/D/T/P/M.

• 한국세라믹학회지
• /
• 제34권9호
• /
• pp.993-1001
• /
• 1997

The (0.8PPV+0.2DMPPV) copolymer and silica/borosilicate composites were synthesized by sol-gel process. The organic-inorganic hybrid solution was prepared by using of (0.8PPV+0.2DMPPV) copolymer precursor solution as a raw material for organic components and TEOS and TMB for glass components. Then by drying the solution in vacuum at 5$0^{\circ}C$ for 7days and subsequent heat treatment in vacuum at 15$0^{\circ}C$~30$0^{\circ}C$ for 2h~72h with heating rate of 0.2$^{\circ}C$/min and 1.8$^{\circ}C$/min, the organic-inorganic composites were synthesized. Microstructural evolution of the composites was characterized by DSC, IR spectrocopy, UV/VIS spectroscopy, and TEM. Elimination of the polymer precursor and degradation of the polymer were observed by DSC and Si-O and trans C=C absorption peaks were identified by IR spectra. The polymer was found to be successfully incorporated into the glass matrix and it was confirmed by the absorption peaks from the polymer in the UV/VIS spectra and the TEM results. The absorption peak of the composites was found to shift toward short wavelength side compared to that of the pure polymer and the amount of the blue shift increased with increasing the heat treatment temperature and heat treatment time and with decreasing the heating rate.

• 한국세라믹학회지
• /
• 제47권3호
• /
• pp.249-255
• /
• 2010

To investigate optical properties of (V, Pr)-doped $ZrSiO_4$ green pigments, samples were prepared by the ceramic method using NaF and NaCl as mineralizers. They were characterized by X-ray diffraction, UV-Vis spectroscopy and Raman spectroscopy. The changes of color in the samples during heating and effect of mineralizers were studied in terms of valence of the vanadium and praseodymium in the zircon matrix. (V, Pr)-doped $ZrSiO_4$ pigments give rise to green coloration in $800^{\circ}C$. The oxidation state of V and Pr ions of pigments in the glazed samples were confirmed by UV-Vis absorption spectra. This absorption spectra showed three typical bands of trivalent Pr at the 445, 480~490, 592 nm due to f-f transitions and two broad bands of 302~380, 400~500 nm due to f-d transitions of tetravalent Pr. According to the increasing amounts of $Pr_6O_{11}$, the two broad bands showed decreasing intensity at 290, 640 nm due to d-d transitions of tetravalent V.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2006년도 추계학술대회 논문집 광주전남지부
• /
• pp.39-42
• /
• 2006

Titania sols or powders were are very promising materials for environment as photocatalyst. The band gap energy of $TiO_2$ has been known to be 2.8 to 3.2 eV. But the measuring system of its band gap is usually depend on absorption properties. Thus, in this study, absorption properties of $TiO_2$ sols prepared by hydrothermal process were researched with the effect of various particle sizes and concentrations. The mean particle size in $TiO_2$ sols increased as 15 nm to 60 nm, absorption graph measured by UV-Vis spectrometer shows to move red-shift. When dilute solution added with $2^n$ in $TiO_2$, the band gap energy increases as linear function.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2000년도 하계학술대회 논문집
• /
• pp.479-482
• /
• 2000

We investigated UV-vis absorbances to observe photoisimerization and effect of temperature using the mixture solution in chloroform and the LB monolayer mixed with DLPE and 8A5H containing azobenzene which shows reversible cis-trans isomerization irradiated by alternate lights. We could find that the absorption spectrum of the mixtures solution and LB monolayer was reversibly induced to photoisomerization irradiated by Uv of both and visible lights, in addition the absorbance by alternate temperatures.

• 한국결정성장학회지
• /
• 제20권1호
• /
• pp.12-20
• /
• 2010

캄보디아와 탄자니아산 지르콘을 대상으로 메타믹상태와 색상변화에 대한 연구를 하였다. 이를 위해 U, Th 등의 방사성원소 검출을 위한 원소분석과 분광분석(UV-VIS 분광기, FTIR분광기)을 하였다. UV-VIS 분광분석 결과 청색과 무색에서는 고온형의 특징인 많은 흡수 피크들과 세기가 높게 나타났으며 우라늄이 검출된 녹색과 황색 시료에서는 흡수 피크들의 수가 현저히 적게 나타나 메타믹화가 진행되었음을 알 수 있었다. 열처리 후에는 반대의 결과가 나왔다. FTIR 분광 분석 결과 3100~3400 $cm^{-1}$ 영역에서 $[SiO_4]^{4-}$ 내부 진동의 3-포논 조합 모드 밴드들이 메타믹화된 녹색과 황색의 지르콘에서는 완만하며 없어진 밴드들도 있으나 열처리 후에는 다시 결정격자가 원상태로 회복되어 사라졌던 밴드들이 나타났다. 또한 지르콘에 우라늄이 함유되어 있는지를 알 수 있는 4800 $cm^{-1}$ 근처에서 $U^{4+}$의 피크가 녹색과 황색 시료에서 확인 되었다. 연구 결과 분광분석 과 열처리 실험으로 지르콘에 우라늄의 함유가 메타믹상태와 칼라의 변화에 미치는 영향을 확인할 수 있었다.

• 한국재료학회지
• /
• 제27권9호
• /
• pp.459-465
• /
• 2017

Nano-sized Zinc selenide (ZnSe) powder was successfully synthesized using Zn and Se precursors in a hydrothermal process. Temperature for the synthesis was varied from $95^{\circ}C$ to $180^{\circ}C$ to evaluate its influence on the microstructural properties of the synthetic particles. ZnSe powder thus fabricated was characterized using various analytical tools such as SEM, XRD, TEM and UV-Vis methods. Two types of ZnSe particles, that is, the precipitated particle and the colloidal particles, were identified in the analysis. The precipitated particles were around 100 nm in average size, whereas the average size of the colloidal particles was around 20 nm. The precipitated particles made at $150^{\circ}C$ and $180^{\circ}C$ were found to be a single phase of ZnSe; however, an inhomogeneous phase was obtained at the lower synthesis temperature of $95^{\circ}C$, suggesting that the temperature for the synthesis should be over $100^{\circ}C$. The precipitated particles were inactive in the UV-Vis absorption investigation, whereas the colloidal particles showed that absorptions occurred at 380 nm in the UV-Vis spectrum.

• Macromolecular Research
• /
• 제12권1호
• /
• pp.22-25
• /
• 2004

We have synthesized aniline oligomer composites by using heteropoly acid (H$_4$SiW$_{12}$O$_{40}$ ) as a dopant. The doping and dedoping processes of the aniline oligomer composites were investigated with the aid of UV- Vis spectra. The bands of the aniline oligomer at 572 nm weakened or disappeared, and the bands at 268, 412, and 771 nm appeared, after the aniline oligomer was doped. When the solution of the aniline oligomer doped with H$_4$SiW$_{12}$O$_{40}$ was kept at lower values of pH, the aniline oligomer could not be dedoped by dilution. The turning point of doping and dedoping occurred at pH 5.5. The band at 771 nm shifted towards longer wavelengths when the aniline oligomer composites were synthesized using acetone as the solvent. This observation indicates that the molecular chain became stretched. In addition, we also investigated the change of the electronic absorption spectra of the composites with respect to the time laid up.id up.