• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.11a
• /
• pp.31-35
• /
• 2003

폴리카보네이트는 내열성과 투명성이 우수한데 비해 내후성이 좋지 않아 황변 및 물성이 저하되고, 내찰상성이 약하여 긁히기 쉬운데다 이물질에 의해 오염되기 쉬워 투명성이 저하되는 문제점이 있다. 이러한 단점을 극복하고, 사용하는 용도에 따라 요구되는 다양한 기능성을 부여하기 위하여 폴리카보네이트 표면에 기능성층을 형성시킴으로써 그 목적을 달성하고자 한다. 본 논문에서는 이온 주입기술을 이용하여, 폴리카보네이트 표면의 전기전도도 특성을 향상시키고, 피부암 및 백내장 등을 유발하는 유해한 자외선 (UV-A, UV-B)을 차단하려 한다. 표면전기전도도의 향상은 이물질로부터 오염되는 정도를 낮추며, 정전기를 방지할 수 있다. PC(Polycarbonate) 표면에 $N^+,\;Ar^+,\;Kr^+,\;Xe^+$ 이온을 에너지 20keV에서 50keV을 사용하여, 주입량 $5{\times}10^{15}\;{\sim}\7{\times}10^{16}\cm^2$ 로 조사하였다. 이온 주입된 PC의 표면을 두 접점 방법의 표면 저항 측정으로 표면전기전도도 특성을 알아보았고, 자외선차단 특성은 UV-Vis 로 분석하였다. 이들 전기적 광학적 특성간의 상관관계를 관찰하고, 이러한 특성을 나타내는 화학적 기능그룹들의 변화를 보기 위해 FTIR 분석법으로 관찰하였다. 이온조사량의 증가에 따라 표면저항은 $10^7{\Omega}/sq$까지 감소하여 표면전기특성을 증가시키며, 자외선 차단 특성은 UV-A를 95%까지 차단하여 인체에 유해한 자외선 차단에 유용함을 확인하였다. 이러한 특성은 PC 표면에 카본 네트워크 형성과 $\pi$전자들의 운동량을 증가시키는 구조로 고분자 사슬들의 결합구조 변형에 의한 것으로 생각된다.블을 가지고 파서를 설계하였다. 파서의 출력으로 AST가 생성되면 번역기는 AST를 탐색하면서 의미적으로 동등한 MSIL 코드를 생성하도록 시스템을 컴파일러 기법을 이용하여 모듈별로 구성하였다.적용하였다.n rate compared with conventional face recognition algorithms. 아니라 실내에서도 발생하고 있었다. 정량한 8개 화합물 각각과 총 휘발성 유기화합물의 스피어만 상관계수는 벤젠을 제외하고는 모두 유의하였다. 이중 톨루엔과 크실렌은 총 휘발성 유기화합물과 좋은 상관성 (톨루엔 0.76, 크실렌, 0.87)을 나타내었다. 이 연구는 톨루엔과 크실렌이 총 휘발성 유기화합물의 좋은 지표를 사용될 있고, 톨루엔, 에틸벤젠, 크실렌 등 많은 휘발성 유기화합물의 발생원은 실외뿐 아니라 실내에도 있음을 나타내고 있다.>10)의 $[^{18}F]F_2$를 얻었다. 결론: $^{18}O(p,n)^{18}F$ 핵반응을 이용하여 친전자성 방사성동위원소 $[^{18}F]F_2$를 생산하였다. 표적 챔버는 알루미늄으로 제작하였으며 본 연구에서 연구된 $[^{18}F]F_2$가스는 친핵성 치환반응으로 방사성동위원소를 도입하기 어려운 다양한 방사성의 약품개발에 유용하게 이용될 수 있을 것이다.었으나 움직임 보정 후 영상을 이용하여 비교한 경우, 결합능 변화가 선조체 영역에서 국한되어 나타나며 그 유의성이 움직임 보정 전에 비하여 낮음을 알 수 있었다. 결론: 뇌활성화 과제 수행시에 동반되는 피험자의 머리 움직임에 의하여 도파민 유리가 과대평가되었으며 이는 이 연구에서 제안한 영상정합을 이용한 움직임 보정기법에 의해서 개선되었다. 답이 없는 문제, 문제 만들기, 일반화가 가능한 문제 등으

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.5
• /
• pp.3312-3318
• /
• 2014

For the sunscreen development from natural resources, a possible usage of microalgal extracts or mycosporine-like amino acids (MAAs) was investigated. Sunscreens containing 7% of microalgal extracts or MAAs derived from microalgae, Chlamydomonas hedleyi, were prepared and they were applied to human research. Through this clinical research, the values of Sun Protection Factors, Sun Protector Factor (SPF) and Protection Factor of UVA (PFA), of sunscreen containing microalgal extracts or MAAs were determined: SPF values of microalgal extracts and MAAs indicated 9.07 and 9.42, respectively, while PFA ones did 2.43 and 2.41. Due to more than 2 of PFA value in both sunscreens, they can be classified into [PA+]. Taken together, although sunscreen containing microalgae-derived extracts or MAAs does not effectively protect UV irradiation, its capacity can be satisfied if inorganic UV-protecting compounds are added.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.22 no.1
• /
• pp.70-83
• /
• 1996

자외선 차단제는 화장품 원료 중 주요 자극원의 하나이다. 그러나 자오선 차단제를 고분자로 만들 경우 피부에 도포 되었을 때 경피흡수가 불가능 하여 피부 자극 문제를 해결할 수 있다. 이에 본 연구에서는 PVBC와 alkylhydroxycinnamate를 반응시켜 고분자 자외선 차단제를 합성하였다, PVBC는 benzylic chloride를 가지고 있는 고분자로서 이 작용기는 친핵성 치환반응이 용이하므로 side chain modification이 가능하다. PVBC와 alkyl hydroxycinnamate의 반응에서 반응성은 alkyl hydroxycinnamate의 크기와 반응에 첨가된 촉매의 종류에 영향을 받는다. 효율이 낮은 촉매를 사용할 경우에는 alkyl hydroxycinnamate의 크기가 작을수록 반응수율이 높았으며, 높은 효율을 갖는 촉매를 사용할 경우에는 alkyl hydroxycinnamate의 종류에 관계없이 반응수율은 100%였다. 실험에 사용한 PVBC는 평균 분자량이 55,000이었으며, 고분자의 구조와 분자량은 NMR과 GPC로 확인하였다. 고분자 자외선 차단제의 자외선 흡수 능력은 OMC에 비해 65 - 94% 였으며, caprylic/capric triglyceride에 좋은 용해도를 보여주었다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.12
• /
• pp.482-487
• /
• 2016

Ultra-violet rays are very harmful to eye health care. The blocking of ultra-violet rays and a reduction of optical reflection in the visible light range, which is to increase the share of transmitted light, and avoid the formation of ghost images in imaging, are important for the applications of polymer eyeglasses lenses. In this study, the high-refractive index polymer lenses, n=1.67, were fabricated by injection-molded method with the xylene diisocyanate monomer, 2,3-bis-1-propanethiol monomer, and benzotriazol UV absorber (SEESORB 709) mixture. To reduce the reflection of the polymer lens surfaces, multi-layer anti-reflection (AR) coatings were coated for both sides of the polymer lens using an E-beam evaporation system. The optical properties of the UV blocking polymer lens were characterized using a UV-visible spectrometer. The material properties of the thin films, which were composed AR coating layers, refractive index, and surface roughness, were analyzed by ellipsometry and atomic force microscopy. As a result, the fabricated polymer lens perfectly blocked ultra-violet rays below 395 nm with a blocking rate greater than 99%.

• Proceedings of the SCSK Conference
• /
• 1992.09a
• /
• pp.97-114
• /
• 1992

In these days sun products are developed and produced by the cosmetic scientists in the world. Peoples need strongly to protect themselves from the hazardous UV rays dued to the destruction of ozone layer. Therfore, we, cosmetic scientists must have an effort to produce the more effective goods. In this article the market survey of sun-products as well as the currency of sunscreen agents was investigated. It was found that Benzophenone - 3 and Ocytyl methoxy cinnamate were widely used. The lotions, using Benzophenone - 3 as the chemical agents, and TiO$_2$and micro TiO$_2$ as the physical agents, were measured the UV-Spectrum in the Dilution and Application method. Photoprotective activity of chemical agents can usually be measured in solution state. However, that of the insoluble physical agents such as TiO$_2$is hardly measured in this state. Photoprotective ability of the insoluble physical agents was able to be measured by application of lotions to the surface of UV cells. It was found by this method that micro TiO$_2$showd stronger UV scattering effect than TiO$_2$in this method.

• Journal of the Korean Chemical Society
• /
• v.56 no.6
• /
• pp.725-730
• /
• 2012

HEMA (2-hydroxyethyl methacrylate), EGDMA (ethylene glycol dimethacrylate; cross-linker), MMA (methyl methacrylate) and AA (acrylic acid) were copolymerized with ethyl gallate and propyl gallate as additives in the presence of AIBN (2,2'-azobisisobutyronitrile; initiator). The measurement of physical properties of the produced copolymers exhibited that refractive index, water content, visible transmittance, tensile strength, and contact angle were in the range of 1.433-1.435, 38.71-38.99%, 85.4-88.8%, 0.2468-0.2740 kgf and $49.77-36.29^{\circ}$, respectively. The transmittances of the copolymers were measured to be in the range of 49.0-7.4% and 71.0-43.4% for UV-B and UV-A, respectively, indicating that the copolymers have UV-blocking effect. The produced copolymers containing ethyl gallate and propyl gallate satisfied the basic physical properties required for the fabrication of hydrogel contact lenses. The copolymers showed an increase of wettability and UV-blocking effects while having no significant change in water content compared to the gallate-free copolymers.

• Journal of the Korean Chemical Society
• /
• v.54 no.6
• /
• pp.755-760
• /
• 2010

This study used 3-vinylanisole and 4-vinylanisole with the cross-linker EGDMA (ethylene glycol dimethacrylate), HEMA (2-hydroxyethyl methacrylate), MMA (methyl methacrylate), NVP (N-vinyl-2-pyrrolidone) and the initiator AIBN (azobisisobutyronitrile) for copolymerization. Measurement of the physical characteristics of the copolymerized material showed that the refractive index is 1.4496 - 1.4894, water content 22.93 - 35.50%, visible transmittance 88.8 - 90.8%. Also, measurements showed that the refractive index increased while the water content decreased as the ratio of 3-vinylanisole and 4-vinylanisole increased. And in cases of copolymer with 3-vinylanisole, 4-vinylanisole (added 15%) the results showed transmittance of 52.8 - 82.2%, 13.2 - 26.2% respectively for UV-A and UV-B showing that they have UV-blocking effects. Based on the results of this study, the produced copolymer can be estimated to be suitable for use as ophthalmic lens material for high refractive index and UV- blocking effects.

• Journal of Korean Ophthalmic Optics Society
• /
• v.19 no.1
• /
• pp.69-77
• /
• 2014

Purpose: The functional ophthalmic lenses containing fluorine-substituted aniline group (2,4-difluoroaniline, 2,6-difluoroaniline, 3,4-difluoroaniline) were manufactured and the physical and optical characteristics of copolymerized ophthalmic lens were investigated. Methods: HEMA (2-hydroxyethylmethacrylate), NVP (N-vinyl pyrrolidone), MA (methacrylic acid), the cross-linker EGDMA (ethylene glycol dimethacrylate) and the initiator AIBN (azobisisobutyronitrile) were used as a basic combination and fluorine-substituted aniline group (2,4-difluoroaniline, 2,6-difluoroaniline, 3,4-difluoroaniline) were used as additives for preparing the hydrogel soft contact lenses. The hydrogel ophthalmic lens was manufactured by cast mould method and the ophthalmic lenses were stored in a 0.9% NaCl normal saline for 24 hrs. Results: The optical transmittance of the sample with addition 2,4-difluoroaniline showed that the UV-B(9.8~51.4%), UV-A(58.8~79.2%) and visible transmittance(87.0~90.4%). In the case of 2,6-difluoroaniline were measured the UV-B(80.2~83.2%), UV-A(85.8~86.4%), and visible transmittance(90.8~91.4%). Also, the optical transmittance of ophthalmic lens containing 3,4-difluoroaniline were measured the UV-B transmittance of 3.8~30.4%, UV-A transmittance of 47.8%~74.4% and the visible transmittance of 86.2~91.0% respectively. Conclusions: Based on the results of this study, 2,4-difluoroaniline and 3,4-difluoroaniline can be used effectively as additive for UV-blocking ophthalmic contact lenses.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.33 no.9
• /
• pp.1463-1471
• /
• 2009

Silver ions or silver nanoparticles have multi-functional properties. The cotton fabrics for providing multi-functional properties were treated with a nanosilver powder, UV-absorbers, and dimethyloldi-hydroxyethyleneurea (DMDHEU) alone and mixed solution. The physical properties, UV protection, antibacterial, and deodorizing properties of treated cotton fabrics were evaluated. The results were as a follows. The UV protection of cotton fabrics were increased by the application of a nanosilver and Uv-absorbers mixture. The UV protection of treated fabrics were improved by nanosilver/DMDHEU/UV-absorbers mixed solution. The wrinkle recovery properties of fabrics treated with DMDHEU and nanosilver improved. The stiffness of fabrics are decreased by a nanosilver/DMDHEU/UV-absorbers mixed solution. The antibacterial properties of the fabrics treated with nanosilver/DMDHEU/UV-absorbers mixed solution is 99.99%. The functional properties of cotton fabrics are shown to be better with aanosilver/DMDHEU/UV-absorbers mixed than treated with nanosilver alone.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.39 no.2
• /
• pp.141-148
• /
• 2013

The harmful effects of ultraviolet (UV) radiation by increasing sun exposure are making people use sunscreens casually. To keep pace with this trend, many researches about mixing different ingredients or extracting effective ingredients from natural materials are conducted by cosmetics industry. In the present study, we evaluated the UV blocking effect of the sunscreen containing Scutellaria baicalensis Georgi extract. 10 volunteers were measured by minimal erythema dose (MED) and sun protection factor (SPF) of each product. The SPF results were $34.52{\pm}2.13$ and $32.67{\pm}1.44$ in the sunscreen containing Scutellaria baicalensis Georgi extract and that of not containing the substance, respectively. Although the difference of SPF between two products was statistically not significant, it is thought to be meaningful in evaluating clinical effects of the sunscreen using natural substance to humans without any adverse reaction.