• Journal of the Korean Graphic Arts Communication Society
• /
• v.16 no.3
• /
• pp.43-60
• /
• 1998

The photosensitive properties and spectroscopic characteristics in the organic photoconductor(OPC) with carrier generation layer(CGL) of poly(vinylbutyral)(PVB) and polycarbonate(PC) doped with titanyl phthalocyanine(TiOPc) were investigated. The change of crystal structure of TiOPc dispersed with PVB and PC was shown by UV-visible reflective spectrum and FT-IR spectrum and mainly caused by the difference of solubility of solvent and the interaction between TiOPc and binder. The particle size of TiOPc dispersed with PVB measured by SEM was smaller than in PC. The crystal structure of TiOPc dispersed with PVB was amorphous type and in PC was $\alpha$type. It was found that the photosensitive properties of OPC were dependent on the change of absorbance and ionization potential of TiOPc occurred from the difference of crystal structure. In this work, the photosensitivity of OPC of TiOPc dispersed with PVB was better than PC due to the crystal type and the smaller particle size.

• Microbiology and Biotechnology Letters
• /
• v.22 no.2
• /
• pp.169-174
• /
• 1994

Antitumor antibiotic HS-1 was purified from the culture broth of a streptomyces floridae SHS-1372 which had been isolated from soil, by solvent extraction, silica gel column chromatography and gel filtration. It was confirmed that HS-1 was active against gram positive bacteria and cancer cells(K562, P388, MCF-7, HT-29). Through the analysis of UV spectrum, melting point, IR spectrum, FAB-MS, $_{1}$H-NMR, $_{13}$C-NMR, 2D-NMR spectra, HS-1 could be identified sa the actinomycin X$_{2}$ antibiotics containing actinocine chromophore and peptides consisted of threonine, proline, methylvaline, sarcosine, D-valine and 4-ketoproline.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1997.04a
• /
• pp.45-48
• /
• 1997

Enhancing the electrical conductivity of the ultrathin organic films is one of the important factors for the development of molecular electronic devices. The Langmuir-Blodgett(LB) technique has recently been attracted interest as the a method of deposition ultrathin films. We have fabricated N-docosyl-N'-methyl viologen-diTCNQ(DMVT) anion radical LB film and investigated the optical and electrical conductivity. We have measured UV/visible and FT-lR spectrum. In ESR spectrum, we confirmed that a half-amplitude linewidth is clearly dependent on both temperature and incident angle, which indicates conducting species change. The in-plane electrical conductivity of 21 layers is approximately 1.37$\times$10$^{-6}$ (S/cm).

• Korean Journal of Microbiology
• /
• v.19 no.3
• /
• pp.115-120
• /
• 1981

The substance produced by Bacillus subtilis $480HS_{20}$ showed specific anti Puccinia graminis activity and narrow antimicrobial activity. The anti Puccinia graminis substance was found to be peptide antibiotic which had molecular weight of about 1,500 by sephadex LH-60 gel-filtration. The amino acid composition of the substance waas composed of Ser (1), Glu(3), Ile(1), Gyr(2) and His (1). The compound was yellowish powder and it's melting point was $214{\sim}216^{\circ}C$. UV spectrum in methanol showed single peak at 278(E 1% 1cm 15.2) and important peak at 3,350-3,320, 2,940, 1,635, 1,520-155, 1,240-1, $230cm^{-1}$ were observed in IR Spectrum. The substance was soluble in methanol but insoluble in water, ethyl acetate and chloroform. The antibiotic $480HS_{20}$ showed a little antimicrobial activity against Pyricularia aryzae but no antimicrobial activity was observed against Gram + and Gram - bacteria and molds except pyricularia oryzae.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2000.05b
• /
• pp.131-134
• /
• 2000

Electroluminescent[EL] from conjugated polymers has recently received great attention because polymer light-emitting diodes[LEDs] clearly have potential for applications such as large-area displays. The operation of polymer LEDs is based on double injection of electrons and holes from the electrodes, followed by formation of excitons whose radiative decay results in light emission at wavelength characteristic to the material In this paper, we fabricated the single layer EL device using poly(3-octylthiophene)[P3OT] as emitting material. The orange-red light was clearly visible in a dark room Maximum peak wavelength of EL spectrum saw at 640nm in accordance with photon energy 1.9eV. And we know that ionization energy of P3OT is 4.7eV from the cyclic voltammetry.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2010.06a
• /
• pp.58-58
• /
• 2010

We designed and synthesized DFPCE blue emitting materials by Mc Murry coupling reaction in order to improve the device efficiency and stability. The structure was confirmed by $^1H$-NMR. The physical properties were characterized by differential scanning calorimetry, thermogravimetric analysis, UV-vis, photoluminescence spectrum and cyclic voltammetry. The decomposition temperature of the material, which correspond to a 5% weight loss upon heating, is $513.58^{\circ}C$. The photoluminescence (PL) spectrum of DFPCE exhibited blue emission at 425 nm in chloroform solution and 462 nm in film.

• YAKHAK HOEJI
• /
• v.38 no.4
• /
• pp.366-371
• /
• 1994

To improve the identification power of TLC/HPTLC the in situ reflectance spectra obtained directly from plates with commercial scanner are used. The spectrum normalization should be carried out prior to comparing and searching the spectra from library for the identification of compounds. Because the reflectance does not obey the Lambert-Beer's law, there arise some problems in normalization. These problems could be solved to some extent by normalizing the spectra with regression methods. The spectra are manipulated with the regression function of a curve obtained from the correlation plot. When the parabola was used as the manipulating function, the spectra were identified with the accuracy of 97% and this result was better than that of conventionally used the point and area normalization method.

• Journal of the Korean Applied Science and Technology
• /
• v.14 no.2
• /
• pp.71-79
• /
• 1997

Ultra-thin films of poly[2-[4-(9-(10-phenyl)anthracenyl)phenoxy)hexyloxy]]-1,4-phenylenevinyleylene(PAHPV) were prepare-d on the hydrophilic ITO substrate by Langmuir-Blodgett(LB) technique. ${\lambda}_{max}$ in the photoluminescence spectrum of these films was 458nm at the excitation wavelength of 365nm before thermal treatment, which comes from diphenylanthracene side chain of PAHPV. It was also confirmed with UV-Vis spectrometer that ultra-thin LB films of PAHPV precursor polymer were prepared well. After thermal treatment for conjugation of PAHPV precursor polymer, ${\lambda}_{max}$ in the photoluminescence spectrum of these films changed to 365nm, which means that the conjugation of these PAHPV films was completed.

• Journal of Integrative Natural Science
• /
• v.3 no.1
• /
• pp.24-27
• /
• 2010

Multi-functionalized rugate porous silicon (PSi) for biosensor was developed by hydrosilylation with silole and its further reaction with biotin groups. PSi was generated by an electrochemical etching of silicon wafer in aqueous ethanolic HF solution PSi prepared by using etching conditions showed that many sharp spectral lines can be obtained in the optical reflectivity spectrum. 1,1-hydrovinyl-2,3,4,5-tetraphenylsilole was obtained from the reaction of 1,1-dilithio-2,3,4,5-tetraphenyl-1,3-butadiene with dichlorovinylsilane. Multi-functionalized PSi with silole and biotin groups was characterized by UV-vis absorption spectroscopy, Ocean optics 2000 spectrometer, and fluorescence spectroscopy. Optical characteristics such as reflectivity and photoluminescence (PL) were observed. An increase of the reflection wavelength in the reflectivity spectrum by 20 nm was observed, indicative of a change in refractive indices induced by hydrosilylation of the silole and biotin groups to the rugate PSi. This red-shift was attributed to the replacement of some of the Si-H group of fresh rugate PSi with silole and biotin group.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1997.11a
• /
• pp.525-528
• /
• 1997

In this study, Eu(TTA)$_3$(phen) was synthesized and its films were prepared by vapor deposition method. Its films were characterized by UV-Vis absorption spectroscopy, Atomic Force Microscopy(AFM) and Photoluminescence(PL) measurements. Their electroluminescent(EL) characteristics were investigated by PL measurements, where a cell structure of glass substrate/ITO/Eu(TTA)$_3$(phen)/Al was employed. It was found that its films were well prepared without any decomposition and the film thickness could be controlled by adjusting the amount of Eu(TTA)$_3$(phen) in a boat. The EL spectrum of these films was almost the same as that of PL spectrum of these films.