• 폴리머
• /
• 제36권4호
• /
• pp.531-535
• /
• 2012

폴리아닐린(PANI) 나노섬유를 전도성 충전제로 사용하여 광경화형 전도성 투명필름을 제조하였다. 화학산화중합(chemical oxidation polymerization)으로 나노섬유 구조의 산화형 폴리아닐린(ES-PANI)을 합성하였다. ES-PANI는 디도핑을 통해 환원형 폴리아닐린(EB-PANI)으로 유도하였다. 이것을 전도성 충전제의 전구체로 사용하여 도데실벤젠설폰산(DBSA)이 포함되어 있는 광경화형 레진에 분산시키면 재도핑된 재산화형 폴리아닐린(rES-PANI)을 얻을 수 있었다. 이런 과정을 통해 나노섬유 형태가 유지되면서 높은 전도성과 분산안정성이 우수한 광경화형 전도성 레진용액을 제조할 수 있었다. 제조된 광경화형 전도성 레진용액은 상온에서 3달 정도 두어도 rES-PANI 충전제의 침전물이 생기지 않았다. 또한 이 용액을 폴리(메틸 메타크릴레이트)(PMMA) 기재 위에 스핀코팅 후 광경화하여 약 $5{\mu}m$ 두께의 전도성 투명필름을 제조하였다. rES-PANI 나노섬유 농도가 1.4 wt%일 때 표면저항 $6.5{\times}10^8{\Omega}/sq$, 550 nm 파장에서 91.1%의 투과도를 보였다. ES-PANI의 디도핑-재도핑(dedoping-redoping) 과정을 통해 광경화형 전도성 레진용액에 분산된 PANI는 농도에 따라 필름표면저항과 광학적 투명도를 조절할 수 있는 대전방지 보호필름을 제작하는 새로운 방법을 제시하였다.

• 멤브레인
• /
• 제33권2호
• /
• pp.77-86
• /
• 2023

본 연구에서는 낮은 막 저항과 높은 수산화 이온 전도성을 가지는 세공 충진 이온교환막 제조법으로 연구하였다. 알칼리 내구성을 향상하기 위해 폴리 테트라 플로오 에틸렌 소재인 다공성 지지체를 사용하였고 세공에는 단량체 2-(dimethylamino)ethyl methacrylate (DMAEMA), vinylbenzyl chloride (VBC)를 이용하여 copolymer를 제조했다. 가교제는 divinylbenzene (DVB)를 사용하였고 가교제 함량별로 이온교환막을 제조하여 DMAEMA-DVB와 VBC-DMAEMA-DVB copolymer에서 가교제 함량이 미치는 영향에 관해 연구하였다. 그 결과, PTFE 소재 지지체를 이용하여 화학적 안정성이 향상했고 저압 UV 램프를 사용하여 낮은 온도에서 빠른 광중합이 가능하여 생산성을 높일 수 있는 장점이 있다. 음이온교환 막 연료전지에 요구되는 이온교환막의 물리적 및 화학적 안정성을 확인하기 위해서 인장강도와 내알칼리성 테스트를 진행하였다. 그 결과, 가교도가 증가할수록 인장강도 대략 40 MPa가 증가하였고, 최종적으로 이온전도도와 내알칼리성 테스트를 통해 가교제 함량이 증가할수록 알칼리 안정성이 증가하는 것을 확인하였다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2005년도 추계 학술논문 발표대회
• /
• pp.33-38
• /
• 2005

It is applied in the high quality equipment construction by introduction of this high duality treating technology (ozone treating, activated carbon treating, high quality oxidation treating, UV treating etc.)waterproofing or corrosion proof method caused secondary economy damage of operation discontinuance and high quality treating equipment for applying existent waterproofing method that corrosion proof ability (ozone resistance performance, chemical resistance etc.) and abrasion resistance performance by comprehension insufficiency of user and designer. Therefor, In this study, we will analyze problem of waterproofing and corrosion material of existing construction application by high quality treating, and measure physical performance change by various condition. It is required to waterproofing and corrosion system and application of the field valuation.

• Korean Chemical Engineering Research
• /
• 제49권3호
• /
• pp.277-284
• /
• 2011

본 연구에서는 알루미나 졸과 아크릴레이트 단량체를 이용하여 UV 경화형 유-무기 하이브리드 하드코팅 용액을 제조하였다. Aluminum isopropoxide로부터 얻어진 알루미나 졸에 실란커플링제인 methacryloxypropyl trimethoxysilane(MPTMS)을 첨가하여 제조된 졸을 무기물 성분으로 사용하였다. 유기물 성분으로는 다양한 아크릴레이트 단량체인 pentaerythritol triacrylate(PETA), 1,6-hexanediol diacrylate(HDDA), dipentaerythritol hexaacrylate(DPEHA)를 혼합하여 사용하였다. 이후 무기물 성분과 유기물 성분을 혼합하여 유-무기 하이브리드 코팅 용액을 제조한 후, 이를 polycarbonate 기판 위에 스핀 코팅 후 UV 경화를 실시하여 도막을 형성하였다. 이때 무기물 성분 중의 MPTMS의 첨가량과 UV 경화 시간 변화가 코팅 막의 물성에 미치는 영향을 연구하였다. 그 결과 MPTMS가 0.20 mole 첨가 될 경우 코팅 막은 3H의 우수한 연필경도를 나타내었으며 haze값이 2%로 내마모성도 우수하였다.

• 대한치과보철학회지
• /
• 제37권3호
• /
• pp.343-357
• /
• 1999

The color change of maxillofacial silicone has been attributed to certain environmental factors such as exposure to the UV component of natural sunlight, wetting and drying of the elastomer and surface abrasion resulting from the application and removal of cosmetics. The purpose of this study was to evaluate the color change of maxillofacial silicone (Silastic MDX4-4210) according to type of pigment (cadmium yellow, titanium white, cosmetic red), and UV absorber application method after 200, 400, and 600 hours of 350nm UV light irradiation. The results were as follows. 1. According to type of pigments, after 200 hours cosmetic red showed significantly larger color change than cadmium yellow and titanium white, and after 400 and 600 hours color change significantly decreased in the order of cosmetic red, cadmium yellow, and titanium white (p<0.05). 2. In the cadmium yellow group, after 200 hours, the non-treatment group showed significantly larger color change, but after 400 and 600 hours, color change significantly decreased in the order of non-treatment, surface application and mixed group (p<0.05). 3. In the titanium white group, there was no significant color change difference between the three groups after 200 and 400 hours, but after 600 hours, the mixed group showed significantly smalt or color change than the non-treatment and surface application groups (p<0.05). 4. In the cosmetic red group, there was significant decrease in color change in the order of non-treatment, surface application and mixed group (p<0.05). From the results above, the effect of UV light absorber differed according to the type of pigment, but mixing UV light absorber with maxillofacial silicone is thought to give superior resistance against UV light irradiation in the long run.

• 한국물환경학회지
• /
• 제26권6호
• /
• pp.1028-1033
• /
• 2010

Wastewater reuse for agricultural irrigation needs treatment and control of pathogens to minimize risks to human health and the environment. In order to evaluate the water quality of UV-treated reclaimed water, this study focused on the relationship between micro-pathogens and particulate matters. MS2 was selected as an index organism because it has similar characteristics to human enteric virus and strong resistance to UV disinfection. The turbidity and suspended solid (SS) were selected for test parameters. In this study, it was performed with different UV doses (30 and $60mJ/cm^2$) for estimation of the MS2 inactivation rate using collimated beam batch experiments in the laboratory. The experiment results by turbidity or SS concentration presented that the increased concentration of them lowered MS2 inactivation. At the turbidity (below 4.27 NTU) and SS (below 1.47 mg/L) of the low level range, the inactivation of 60 UV dose is higher than 30 UV dose. However, at the turbidity and SS of the high level, the increasing UV dose did not show apparent increasing the MS2 inactivation. In quantitative microbial risk assessment (QMRA), it can confirm the trend that $P_D$ and turbidity concentrations have positive correlationship at the low concentration, which was also observed in SS. The QMRA can be helpful in communication with public for safe wastewater reuse and be recommended.

• 한국미생물·생명공학회지
• /
• 제22권5호
• /
• pp.491-494
• /
• 1994

Antibiotic HS-2 was purified from the culture broth of Streptomyces plicatosporus which was isolated from soil, by solvent extraction, silica gel column chromatography and gel filtration. Through the analysis of UV, $^{1}$H-NMR, $^{13}$C-NMR spectrum, HS-2 was identified as rubiginone B$_{2}$. It was confirmed that HS-2 enhanced the cytotoxicity of colchicine against multidrug-resistant tumor cells.

• BMB Reports
• /
• 제33권5호
• /
• pp.412-416
• /
• 2000

The obligate aerobic Deinococcus are highly resistant against lethal effect of UV-and ionizing-radiation. Only five mesophilic Deinococcus species, i. e. D. radiodurans, D. radiophilus, D. proteolyticus, D. radiopugnans, and D. grandis are known. Since an indispensable role of catalase has been suggested in protecting cells against oxidative stress and UV radiation, Deinococcal catalase activity of each species and electrophoretic profiles of catalases were investigated on gel. Total catalase activity was varied among the species in the aerobically grown culture at stationary phase. The occurrence of multiple forms of catalases with different molecular weights in four species of Deinococcus and of a single catalase in D. radiopugnans suggests that each species shows the unique catalase profiles on gel. Some Deinococcal catalases also exhibit peroxidase activity. Since Deinococcus spp. are less-distinct to each other in their morphology, biochemical and physiological properties, the catalase profiles on PAGE would be useful in identifying the species of Deinococcus.

• 한국전기전자재료학회논문지
• /
• 제18권10호
• /
• pp.924-928
• /
• 2005

We synthesized the two types of photoalignment material of high thermal resistance with hydroxyl aromatic polyimide, and studied the liquid crystal (LC) aligning capabilities on the photopolymer layers. Also, electro-optical (EO) performances for the twisted-nematic (TN)-liquid crystal display (LCD) photoaligned with linearly polarized UV exposure were investigated. A good LC alignment with UV exposure on the two types of photopolymer surface can be obtained. The Voltage-transmittance (V-T) curve in the photoaligned TN cell with UV exposure was different from two type. The response time of photoaligned TN cell was measured about 21 ms in two alkyl chain and about 15 ms in four alkyl chain.

• 한국전기전자재료학회논문지
• /
• 제17권1호
• /
• pp.65-69
• /
• 2004

We synthesized photoalignment material of high thermal resistance with hydroxyl aromatic polyimide, and studied the liquid crystal (LC) aligning capabilities on the photopolymer layers. Also, electro-optical (EO) performances for the twisted-nematic (TN)-liquid crystal display (LCD) photoaligned with linearly polarized UV exposure were investigated. A good LC alignment with UV exposure on the photopolymer surface can be obtained. However, the low pretilt angles were obtained below 1$^{\circ}$. The Voltage-transmittance (V-T) curve without backflow bounce in the photoaligned TN cell with UV exposure was observed. The response time of photoaligned TN cell was measured about 24 ms. Finally, The photoaligned TN cell has few hysteresis, and shows the residual DC voltage that is less.