• 제목/요약/키워드: UV index

검색결과 287건 처리시간 0.024초

UV-laser 조사에 따른 폴리머 상부 클래드 광도파로 브래그 격자의 파장 변화 (The wavelength shift of waveguide Bragg grating with its polymer overclad irradiated by UV-laser)

  • 박동영;최기선;윤재순;백세종;문형명;김진봉;김광택;임기건
    • 한국광학회:학술대회논문집
    • /
    • 한국광학회 2007년도 동계학술발표회 논문집
    • /
    • pp.221-222
    • /
    • 2007
  • The UV laser trimming can be useful to have an accurate performance specification of the passive waveguide devices. In order to measure the change of the refractive index of polymer overclad layer under the irradiation of uv light in a high precision Bragg grating is fabricated on the silica core of planar waveguide and the corresponding transmittance spectrum was analyzed. An effective refractive index change of $4.7x10^{-5}$ was obtained for a straight waveguide when its $60{\mu}m$-thick overclad was irradiated by UV laser pulses of its total fluence 24 $J/cm^2$.

  • PDF

굴절률이 다른 실리콘 봉지재의 봉지 방법에 따른 UV-A LED의 광 특성에 관한 연구 (Optical Properties of UV LEDs depending on Encapsulate Method using Silicone Encapsulants with Different Refractive Indices)

  • 김완호;구대형;노주현;이경원;전시욱;김재필;여인선
    • 조명전기설비학회논문지
    • /
    • 제29권3호
    • /
    • pp.39-44
    • /
    • 2015
  • Optical characteristics including the radiant flux and viewing angle of UV LEDs were investigated according to both silicone encapsulants with different refractive indexes and lens shapes. Lead frame was fabricated using the enhanced heat dissipation characteristics with a heat slug structure and the reflector based on EMC(Epoxy Mold Compound) material. Four types of lens shapes were designed and their optical characteristics depending on the refractive index of silicone encapsulants were evaluated. The maximum radiant flux can be achieved when the height of lens are 1.32mm and 1.08mm for silicone encapsulants with low and high refractive indexes, respectively. Depending on the encapsulating method, the viewing angle changes from $148.9^{\circ}$ to $130.2^{\circ}$ for low refractive index and from $145.3^{\circ}$ to $136.8^{\circ}$ for high refractive index. As a result, it is found that the optical characteristics of UV LEDs can be controled through both encapsulating method and the refractive index of encapsulants.

비접촉식 자외선 광반응조를 이용한 하수 대장균의 살균과 Log 불활성화율 지표 (Disinfection of E. coli from Wastewater using a Non-contact type UV Photoreactor and Log Inactivation Index)

  • 김성홍;김경면;김광일;최재완
    • 상하수도학회지
    • /
    • 제30권2호
    • /
    • pp.139-145
    • /
    • 2016
  • Disinfection of microorganisms using UV light is widely used in the field of water supply and wastewater treatment plant, In spite of high germicidal effect and relatively clean by-product, UV disinfection has fundamental defeat that is accumulation of fouling materials at the interface of water and lamp sleeve. Non-contact type of UV photoreactor which can avoid this fouling generation was developed and the experimental performance evaluation of the system was carried out in this study. Log inactivation rate of E. coli was selected as a disinfection index. The concentration of E. coli of second clarifier effluent was $8.2{\times}10^1-8.2{\times}10^3$ colony per mL and was well inactivated by the non-contact type of UV photoreactor. Under the UV intensity condition of $2.1-2.5mW/cm^2$, E. coli removal rate was observed in the range of 54 - 95% when the HRT was increased from 10 to 52 seconds. Experimental results showed that log inactivation of E. coli was proportional to UV dosage and $200mJ/cm^2$ of UV dose is expected for the 2.0 log inactivation of E. coli from the second clarifier effluent. Between the two parameters of UV intensity and contact time which are consist of UV dose, UV intensity was 4 times more effective than contact time.

The internal UV-line-strength relations of early-type galaxies

  • 정현진;이석영
    • 천문학회보
    • /
    • 제36권2호
    • /
    • pp.66.2-66.2
    • /
    • 2011
  • The unexpected rising flux of early-type galaxies at decreasing ultraviolet (UV) wavelengths is a long-standing mystery. One important observational constraint is the correlation between UV-optical colours and Mg2 line strengths found by Burstein et al. (1988). The simplest interpretation of this phenomenon is that the UV strength is related to the Mg line-strength. Under this assumption, we expect galaxies with larger Mg gradients to have larger UV colour gradients. By combining UV imaging from GALEX, optical imaging from MDM and SAURON integral-field spectroscopy, we investigate the spatially-resolved relationships between UV colours and stellar population properties of 34 early-type galaxies from the SAURON survey sample. We find that galaxies with old stellar populations show tight correlations between the FUV colours (FUV-V and FUV-NUV) and the Mg b index, $H{\beta}$ index and metallicity [Z/H]. We have also derived logarithmic internal radial colour, measured line strength and derived stellar population gradients for each galaxy and again found a strong dependence of the FUV-V and FUV-NUV colour gradients on both the Mg b line-strength and the metallicity gradients. In particular, global gradients of Mg b and [Z/H] with respect to the UV colour across galaxies are consistent with their local gradients within galaxies, suggesting that the global correlations also hold locally. From a simple model based on multi-band colour fits of UV upturn and UV-weak galaxies, we have identified a plausible range of parameters that reproduces the observed radial colour profiles. In these models, the centers of elliptical galaxies, where the UV flux is strong, are enhanced in metals by roughly 60% compared to UV-weak regions.

  • PDF

Characteristics of the Erythemal Ultraviolet-B (EUV-B) Irradiance in Anmyeon (Korea Global Atmosphere Watch Center)

  • Hong, Gi-Man;Park, Jeong-Gyoo
    • Journal of Korean Society for Atmospheric Environment
    • /
    • 제24권E2호
    • /
    • pp.74-82
    • /
    • 2008
  • We have examined seasonal and annual means of clear-sky solar noon and daily erythemal ultraviolet-B irradiances measured in Anmyeon. The intensity of the EUV-B irradiance is mainly dependent on solar zenith angle (SZA) and total ozone amounts on clear day conditions. The daily maximum occurs near solar noon time and the highest monthly accumulated EUV-B is seen in July in Anmyeon. The maximum daily variation occurs in June and July due to precipitation and clouds. The 7-year trend of EUV-B irradiance shows that it is slightly increasing. Additionally, we could confirm that aerosol effects such as Asian Dust decreases the EUV-B irradiance reaching the ground surface by 35% to 60%. For more than 45% of the summer days, EUV-B irradiacne was high enough that the UV index registered higher than category Extremely High. This information will be very important for evaluation of the UV index for prevention of both skin cancer and ecosystem damages as well as to understand UV climatology over the Korean Peninsula.

기상청에서 운용 중인 지역별 지표 홍반자외선(EUV-B) 복사의 특성 (Characteristics of Erythemal Ultraviolet Irradiance operating at Korea Meteorological Administration)

  • 홍기만;최병철
    • 한국대기환경학회지
    • /
    • 제22권2호
    • /
    • pp.223-233
    • /
    • 2006
  • We analyzed the monthly and seasonal mean of the daily Erythemal Ultraviolet-B (EUV-B, $280{\sim}320nm$) irradiance operating in Pohang, Anmyeon, Gosan, Mokpo and Kangnung with UV-Biometer (Solar Light Co., Model No. 501) at clear-sky noon during the period from 1999 to 2004. Also, we investigated the seasonal and regional characteristics for the UV index over the Korean Peninsula. The daily maximum occurred near solar southing time and the highest monthly accumulated EUV-B irradiance appeared in July and August at each regional observatory. The monthly mean value of the clear-sky EUV-B irradiance in Pohang, Anmyeon, Gosan, Mokpo and Kangnung showed 196.6, 161.8, 221.9, $171.5mWm^{-2}\;and\;179.7mWm^{-2}$ near noon in July respectively. The annual mean value of the daily accumulated EUV-B irradiance in Pohang, Anmyeon, Gosan, Mokpo and Kangnung were 1.8, 2.1, 2.2, $1.8kJm^{-2}\;and\;1.5kJm^{-2}$ respectively. The UV Index (UVI) showed above UVI 7(High) more than 90 days during one year over the Korean Peninsula.

콩[Glycine max(L.) Merrill] 품종간의 UV-B에 대한 감수성의 차이

  • 김학윤;이천호
    • 한국환경과학회지
    • /
    • 제7권4호
    • /
    • pp.487-492
    • /
    • 1998
  • The experiment was conducted to determine the effects of enhanced UV-B on growth and differential responses among cultivars in soybean. The soybean cultivars subjected to enhanced UV-B irradiation at daily dose of 11.32 kJ $m^{-2}(UV-B_{BE})$ revealed that the growth was significantly depressed. Plant height, leaf number, leaf area and dry weight were inhibited by UV-B irradiation showing differential responses among cultivars used. Danyeubkong seems to be less sensitive to the enhanced W-B irradiation, while Keunolkong more sensitive. Reduction of chlorophyll content was also found significantly greater to Keunolkong. Specific leaf weight an index of leaf thickness, and flavonoid content known as UV-absorbing compounds were significantly Increased in Danyeubkong by UV-B, but those In the other cultivars were not significantly affected. The results indicated that there are cultivar diferences in tile growth and phisiological responses to the enhanced UV-B irradiation and specific leaf weight and UV-absorbing compounds in the leaves were highly related to the sensitivity of soybean by UV-B irradiation.

  • PDF

자작나무 콘테이너묘(苗)의 경화단계(硬化段階) 생장(生長)에 미치는 UV-B 와 수분(水分)스트레스의 효과(效果) (Effects of UV-B Radiation and Water Stress on Hardening Phase Growth of Container-Grown Betula platyphylla Seedlings)

  • 김종진;홍성각
    • 한국산림과학회지
    • /
    • 제87권4호
    • /
    • pp.601-610
    • /
    • 1998
  • 본 연구는 시설에서 자란 콘테이너 묘목(苗木)의 경화과정(硬化過程)에 UV-B의 이용 가능성을 탐색하고자 생장상(生長箱)에서 4개월간 생육(生育)시킨 자작나무 묘목을 대상으로 UV-$B_{BE}$ $3.2KJ\;m^{-2}\;day^{-1}$$5.2KJ\;m^{-2}\;day^{-1}$ 수준의 UV-B 처리와 수분(水分)스트레스 처리(處理)를 4주간 실시하여 경화처리 전(前), 후(後)의 생장(生長) 및 생리적(生理的) 특성을 비교 분석하였다. UV-B 또는 수분스트레스 처리는 수고생장(樹高生長), 잎의 건물량축적(建物量蓄積)을 감소시켰다. UV-B 처리는 근원경생장(根元徑生長)을 감소시켰으나 수분스트레스 처리는 근원경생장을 증진시켰다. UV-B 처리 또는 수분스트레스 처리에 의한 잎의 건물량감소는 묘목의 T/R율을 감소시켰다. T/R율의 감소효과는 수분스트레스 처리에서 가장 크게 나타났다. 엽록소(葉緣素) 지수(指數)는 UV-B 5.2에서 가장 낮았으며 UV-B 3.2와 수분스트레스 처리에서는 비슷한 수준이었다. UV-B 또는 수분스트레스 처리는 콘테이너 묘목의 함수율(含水率)과 수분포텐셜을 낮추었으며 삼투압(滲透壓)을 높혔다. 경화처리에 의한 잎과 줄기의 함수율 감소는 UV-B 처리에 의해서는 빠르게 일어났으나 수분스트레스 처리에 의해서는 보다 서서히 일어났다. 이상의 결과를 보면, 자작나무 콘테이너 묘목의 경화단계에 처리된 UV-B에 의한 생장반응(生長反應) 및 수분생리(水分生理) 변화는 수분스트레스 처리에서의 효과와 유사한 면이 관찰되었다.

  • PDF

4,4'-Thiodibenzenethiol을 이용한 광경화형 에폭시 아크릴레이트 합성과 굴절률에 관한 연구 (Synthesis of UV Curable 4,4'-Thiodibenzenethiol-based Epoxy Acrylate and Their Refractive Index Behavior)

  • 백승석;이상원;황석호
    • 폴리머
    • /
    • 제37권1호
    • /
    • pp.121-126
    • /
    • 2013
  • 4,4'-Thiodibenzenethiol을 기반으로 이관능 에폭시 수지인 4,4'-thiodibenzenethiol diglycidyl ether를 직접합성법으로 합성하였다. 합성된 에폭시 수지가 광경화가 가능하도록 acrylic acid와 반응시켜 광경화형 고굴절 이관능 에폭시 아크릴레이트인 4,4'-thiodibenzenethiol diglycidyl ether diacrylate를 합성하였으며 $^1H$ NMR과 FTIR을 이용하여 화학구조를 확인하였다. 이관능 에폭시 아크릴레이트와 함께 반응성 희석제인 2-phenoxythiol ethyl acrylate를 5, 10, 15, 20, 30 wt% 희석하여 점도와 굴절률과의 상관관계를 확인하였으며 광경화 후 경화필름의 굴절률 변화를 고찰 하였다. 반응성 희석제의 농도가 증가함에 따라 경화물의 경화도가 낮아졌으며, 경화도가 클수록 경화 후 굴절률은 높아지는 경향을 확인하였다.

Polarizing Group Attached Acrylates and Polymers Viewing High Refractive Index

  • Kwon, Ji-Yun;Kim, Bong-Gun;Do, Jung-Yun;Ju, Jung-Jin;Park, Seung-Koo
    • Macromolecular Research
    • /
    • 제15권6호
    • /
    • pp.533-540
    • /
    • 2007
  • We designed and successfully synthesized UV curable, functional acrylate monomers having a polarizing group, i.e., an electron-withdrawing and/or electron-donating group for the optical materials of high refractive index. Optical polymer films made from the functional methacrylate monomers were achieved with photo crosslinking under UV illumination. A monomer having amino and cyano groups (Dimer-CN) exhibited the highest refractive index ($n_{TE}$=1.595 at 850nm) among the studied methacrylate derivatives, due to the large polarizability of the dipolar monomer structures with electron-donating and withdrawing groups. By controlling the compositions of the functional acrylate monomer of copolymers, the refractive indices of the polymers were readily adjusted within a wide range of 1.498-1.595. The copolymers showed a high glass transition temperature $(T_g)$ and good thermal stability, which are desirable for optical applications. $T_g$ and $T_{10%}$ (10%-weight loss occurred) of the copolymers ranged from $120-140^{\circ}C$ and from $329-387^{\circ}C$, respectively.