• 대한화장품학회지
• /
• 제31권3호
• /
• pp.259-263
• /
• 2005

혈류량은 자외선 조사량 증가에 비례하여 증가되는 양상을 보였다. 홍반을 유발하는데 필요한 자외선량(MED)의 차이가 혈류량의 변화와 어떠한 관계가 있는지를 알아본 실험에서, MED가 30 mJ로 비교적 낮았던 피험자들의 경우, 혈류량은 MED를 지나서 급격하게 증가되는 양상을 관찰하였으나 30 mJ 이상에서 MED가 관찰되었던 피험자들의 경우에는 자외선 조사에 따른 혈류량의 변화가 급격한 변화 없이 계속 완만하게 증가되는 양상을 보였다.

• Journal of Photoscience
• /
• 제9권2호
• /
• pp.400-402
• /
• 2002

We collected seeds of Solidago virgaurea plants growing at different altitudes on the Mt Hakusan area in Japan and cultivated them in a naturally-lit green house. Three-week-old seedlings were irradiated with supplemental UV-B for 12 h each day for 1 and 2 weeks. After a week of itradiation the seedlings of the population collected from the higher altitude at Oh-nanjiho (ON) had accumulated more anthocyanins than those from the lower altitude at Bettoh-deai (BD). Levels of anthocyanins in the ON seedlings were highly correlated with the dose of UV-B radiation and the correlation was also observed after 2 weeks. The growth of the third leaves was retarded by UV-B radiation in both populations. The extent of growth retardation in the third leaves was correlated with the dose of UV -B radiation in both populations. However, no significant difference in the extent of leaf area growth was observed between the ON and BD populations. The increase in plant fresh weight was extensively inhibited in the ON seedlings after 1 week of UV-B radiation. The inhibition was recovered to those in the BD population by 2 weeks irradiation. These results indicate that these populations respond differentially to supplementary UV -B radiation during the first week. Because flavonoids such as anthocyanins play an important role in protection against UV-B radiation in many plants, populations growing at higher altitude may be better able to adapt to increased global levels of UV-B radiation.

• 한국정보통신학회논문지
• /
• 제20권12호
• /
• pp.2310-2316
• /
• 2016

본 논문에서는 격자 공정 중에 KrF 엑시머 UV 레이저 노출시간에 따른 광섬유 브래그 격자의 $Co^{60}$ 감마방사선 영향을 연구하였다. 광섬유 브래그 격자는 게르마늄이 첨가된 일반 광섬유를 이용하였으며, UV KrF 엑시머 레이저 노출시간(30, 60, 90, 120초)을 달리하여 제작하였다. 제작된 광섬유 브래그 격자에 106 Gy/min 선량률로 총 선량 34.3 kGy 감마선을 조사한 후 방사선에 의한 온도감도 계수와 브래그 파장 변화를 분석하였다. 실험결과를 통하여, 격자 공정을 위한 UV 레이저 노출시간이 광섬유 브래그 격자의 방사선 민감도에 큰 영향을 줄 수 있다는 것을 확인하였다. 레이저 노출조건 변화에 따른 방사선에 의한 광섬유 브래그 파장의 변화는 최대 50 % 이상의 차이를 보였다.

• 한국환경과학회지
• /
• 제7권4호
• /
• pp.487-492
• /
• 1998

The experiment was conducted to determine the effects of enhanced UV-B on growth and differential responses among cultivars in soybean. The soybean cultivars subjected to enhanced UV-B irradiation at daily dose of 11.32 kJ $m^{-2}(UV-B_{BE})$ revealed that the growth was significantly depressed. Plant height, leaf number, leaf area and dry weight were inhibited by UV-B irradiation showing differential responses among cultivars used. Danyeubkong seems to be less sensitive to the enhanced W-B irradiation, while Keunolkong more sensitive. Reduction of chlorophyll content was also found significantly greater to Keunolkong. Specific leaf weight an index of leaf thickness, and flavonoid content known as UV-absorbing compounds were significantly Increased in Danyeubkong by UV-B, but those In the other cultivars were not significantly affected. The results indicated that there are cultivar diferences in tile growth and phisiological responses to the enhanced UV-B irradiation and specific leaf weight and UV-absorbing compounds in the leaves were highly related to the sensitivity of soybean by UV-B irradiation.

• Journal of Photoscience
• /
• 제6권1호
• /
• pp.5-6
• /
• 1999

Solar ultraviolet-B (UV-B) irradiances incident on a horizantal surface at Taegu of Korea during 1995-1998 were calculated with 5 min averges of measuremets taken every 30 seconds by a broadband UV-B sensor. The maximum and minimum of monthly averages of daily UV-B dose were 15.89 KJ m-2 day-1 in April and 3.91KJm-2 day-1 on May 22, 1998 and 1.230W m-2 at 12 : 45, July 13, 1998, respectively. Increasing trend in annual maximum of instantaneous UV-B radiation was averaged to 12.0% per year during 1995-1998 of observation period.

• 한국기계가공학회지
• /
• 제17권2호
• /
• pp.47-53
• /
• 2018

Nowadays, additive manufacturing (AM) technology is a promising process to fabricate complex shaped devices applied in medical and dental services. Among the AM processes, a DLP (digital light processing) type 3D printing process has some advantages, such as high precision, relatively low cost, etc. In this work, we propose a simple method to fabricate precise dental models using a DLP 3D printer. After 3D printing, a part is commonly post-cured using secondary UV-curing equipment for complete polymerization. However, some shrinkage occurs during the post-curing process, so we adaptively control the UV-exposure time on each layer for over- or under-curing to change the local shape-size of a part in the DLP process. From the results, the shrinkage amounts in the post-curing process vary due to the UV-dose in 3D printing. We believe that the proposed method can be utilized to fabricate dental models precisely, even with a change of the 3D CAD model.

• Current Photovoltaic Research
• /
• 제6권3호
• /
• pp.81-85
• /
• 2018

The photovoltaic modules installed in the actual field are affected by various external environments and the electrical performance output value is generally lowered compared to initial output value. The most of photovoltaic modules consists of low iron glass, encapsulant (EVA), back sheet, frame and junction box assembly based on the solar cells. In this paper, the characteristics of encapsulant which is an important constituent material of photovoltaic module were verified by maximum power determination, electro luminescence images, yellowness index measurement, and gel content measurement after ultraviolet (UV) irradiation exposure. The most commonly installed 72 cells crystalline photovoltaic modules were tested after various UV exposure of 0, 15, 30, and $60kWh/m^2$ and compared with the reference module. After UV exposure of $15kWh/m^2$, which is the current international test condition, a small amount of change was observed in yellowness index and electroluminescence, while a gell content rapidly increased. At a cumulative dose of $60kWh/m^2$, which will be a new international test condition in the near future, however, the yellowness index increased sharply and showed the greatest output power drop.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2016년도 제50회 동계 정기학술대회 초록집
• /
• pp.312.1-312.1
• /
• 2016

We have deposited ZnO thin films by ultraviolet (UV) enhanced atomic layer deposition using diethylznic (DEZ) and water (H2O) as precursors with UV light. The atomic layer deposition relies on alternating dose of the precursor on the surface and subsequent chemisorption of the precursors with self-limiting growth mechanism. Though ALD is useful to deposition conformal and precise thin film, the surface reactions of the atomic layer deposition are not completed at low temperature in many cases. In this experiment, we focused on the effects of UV radiation during the ALD process on the properties of the inorganic thin films. The surface reactions were found to be complementary enough to yield uniform inorganic thin films and fully react between DEZ and H2O at the low temperature by using UV irradiation. The UV light was effective to obtain conductive ZnO film. And the stability of TFT with UV-enhanced ZnO was improved than ZnO by thermal ALD method. High conductive UV-enhanced ZnO film have the potential to applicability of the transparent electrode.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제12권5호
• /
• pp.105-114
• /
• 2007

Advanced oxidation processes(AOPs)는 강력한 산화제인 hydroxyl radical(${\cdot}OH$)를 생성하여 오염물질을 산화시키는 기법이다. 본 연구에서는 DNAPL인 trichloroethylene(TCE)과 tetrachloroethylene(PCE)의 수리학적 특성을 고려하여 우수한 고도산화처리기법($UV/Fe^{3+}$-chelating agent/$H_2O_2$기법, $UV/H_2O_2$기법)의 적용성 평가를 실시하였다. TCE, PCE 처리에 있어 가장 높은 분해효율을 보인 기법은 $UV/H_2O_2$기법으로 pH 6의 중성조건에서 TCE의 경우 150분 만에 99.92%의 TCE 분해를 나타내었고($[H_2O_2]$ = 147 mM, UV dose = 17.4 kwh/L), PCE의 경우 반응 2시간에 99.99%가 분해되었다($[H_2O_2]$ = 29.4 mM, UV dose = 52.2 kwh/L). 또한, $UV/Fe^{3+}$-chelating agent/$H_2O_2$기법을 적용하였을 경우, TCE는 90분 만에 99.9% (UV dose = 34.8 kwh/L, $[Fe^{3+}]$ = 0.1 mM, [Oxalate] = 0.6 mM, $[H_2O_2]$ = 147 mM) PCE는 반응시간 6시간 만에 99.81% (UV dose = 17.4 kwh/L, $[Fe^{3+}]$ = 0.1 mM, [Oxalate] = 0.6 mM, $[H_2O_2]$ = 29.4 mM)의 빠른 분해경향을 보였다. 이러한 결과는 기존의 고도산화처리기법 중 modified Fenton 반응에 UV를 적용함으로서 반응 중 $H_2O_2$의 재생산을 증가시킬 수 있음을 보여주고 있다. 또한, Fe(III) 이온의 Fe(II) 이온으로의 환원을 용이하게 하여 기존 Fenton 반응에 비해 처리시간의 단축 및 분해효율의 향상을 기대할 수 있을 것이다. 그리고, oxalate나 acetate같은 저분자 유기산 착제의 적용으로 pH의 안정성과 분해효율의 향상이 가능하고, 철이온 및 oxalate나 acetate와 같은 물질이 자연상에 존재함에 따라 보다 경제적이고 친환경적인 실용적 처리기법 도출이 가능할 것이다.

• 한국식품영양학회지
• /
• 제36권1호
• /
• pp.17-24
• /
• 2023

To apply UV-C as a non-heating sterilization method to increase the microbiological safety of fresh seedless watermelon products, reductions in E. coli and quality changes by treatment dose (0, 2, 4, 8, 14, 20 kJ/m²) were investigated. The pH, sugar content, and hardness of watermelon inoculated with E. coli were not significantly different according to the UV-C treatment dose, but the polyphenol content was significantly decreased compared to the controls (425.4 GAE ㎍/g F.W.). When treated with 2 and 4 kJ/m², the lycopene content was 31.6 and 30.9 ㎍/g F.W., respectively, which was increased compared to the controls (28.5 ㎍/g F.W.). The arginine and citrulline content was also significantly increased compared to the controls. The number of E. coli was significantly decreased compared to the controls following UV-C treatment. Considering the degree of E. coli reduction, lycopene content, arginine content, citrulline content, and UV-C irradiation time, subsequent experiments were conducted by selecting a UV-C treatment dose of 2 kJ/m². The results of confirming the degree of reduction in the number of E. coli colonies by a single treatment and combined treatment with UV-C 2 kJ/m² and 70% ethanol showed that the combined treatment was most effective as colonies were decreased by 2.3 log CFU/g compared to the controls. Therefore, it is judged that UV-C 2 kJ/m² radiation and combined treatment with 70% ethanol could be applied as a non-heating sterilization method for fresh watermelon slices.