• Journal of the Korean Graphic Arts Communication Society
• /
• v.14 no.1
• /
• pp.89-114
• /
• 1996

Liquid crystal-polymer composite(LCPC) films consisting of a continuous LC phase embedded in a three-dimensional network of polymer matrix are formed by photopolymerization-induced phase separ on. The LCPC films are switched from a light-scattering stats to a highly transparent stats on the application of electric fields. Since the alignment of LC molecular determines the electro-optical properties of films, the requirement for good contrast is to generate the nematic phase at high concentration. On the other hand, the concentration of UV-curable monomer must be increased above some critical value to from the flexible matrix of unbounded polymer. The mixing ratio of LC and UV-curable monomer affects the electro-optical and viscoelastic properties of LCPD films in two opposing ways. By controlling the phase separation process, at an LC fraction of 0.7, the maximum performance of LCPC films has been achieved, the response time of which is 2ms on the application of electric fields.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.21 no.2
• /
• pp.55-65
• /
• 2003

A novel evaluation method is investigated for UV curing process in printing system. The method is based on the measurement of conducivity change by the photopolymerization of UV curable inks and paints. It is found that the decrease of conductivity is caused by photopolymerization of epoxy monomer during UV curing process of ink film and the by the rate of UV curing. It is possible to make the dynamical evaluation the curing rate of UV curable ink in curing process by this method.

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2007.11a
• /
• pp.21-22
• /
• 2007

• Elastomers and Composites
• /
• v.48 no.4
• /
• pp.249-255
• /
• 2013

Hydroxypropyl terminated PDMS was synthesized by the hydrosilylation reaction with allyl alcohol in the presence of Karstedt's catalyst. And them, an one-pot reaction with HDI isocyanurate trimer and hydroxyethyl methacrylate was conducted to give a silicone-modified urethane acrylate oligomer (PUA oligomer) having 9000 g/mol, weight average molecular weight. The synthesized PUA oligomer was characterized by using FT-IR and GPC. The UV-curable coatings were prepared by PUA oligomer blending with a reactive monomer (phenylthioethyl acrylate) under the different mole ratios. It was found that the refractive index of cured film increased when the reactive monomer was added but there was no relationship between the refractive index and amount of reactive monomer. Also, their transmittance for cured films was not change as increasing the content of reactive monomer.

• Clean Technology
• /
• v.23 no.2
• /
• pp.148-157
• /
• 2017

To prepare UV-curable polyurethane-acrylate oligomer, NCO-terminated urethane prepolymers with trimethylolpropane, [TMP; 0 (0), 0.1 (0.021) and 0.2 (0.043) mole (mole fraction)] as crosslinkable tri-functional chain extender were end-capped with pentaerythritol triacrylate [PETA; 2.0 (0.400), 1.7 (0.354) and 1.4 (0.304) mole (mole fraction)] with one hydroxyl group/three vinyl functionalities. The stable as-formulated UV-curable polyurethane-acrylates [stable mixtures of PETA-capped oligomer/reactive acrylic monomer diluents without/with heptadecafluorodecyl methacrylate (PFA; 0, 6 and 9 wt%)] were formed up to 0.2 (0.043) mole (mole fraction) of TMP content in the prepolymer, while homogeneous-mixing failed at 0.3 (0.068) mole (mole fraction), in which the crosslink density in NCO-terminated urethane prepolymer was too high to enable the formation of stable mixture. This study examined the effect of TMP/PETA molar ratio and heptadecafluorodecyl methacrylate (PFA) content (wt%) on the properties of UV-cured polyurethane-acrylates as marine antifouling coating materials. The properties of UV-cured polyurethane-acrylate were found to be significantly dependent on the crosslinkable TMP/PETA ratio and PFA content. With the increasing of the TMP and PFA contents, the contact angles increased, and consequently the surface tension decreased. The adhesion of algae/barnacles to PFA contained film samples were found to be sufficiently weak to allow their easy removal. These results suggest that the UV-cured samples containing PFA have strong potential as coating materials for antifouling applications.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.18 no.1
• /
• pp.13-24
• /
• 2000

UV-curable resin has the properties of quick-drying, high productivity at low temperature, energy, space saving, solventless, non-polluting and low-stinking, and thus, UV-curing system has been widely used in the fields of printing inks, adhesives, paints and coating agents. This study has been executed to develop a new functionnal material by the polymerization induced phase separation. The results obtained were as follows. As for the curing properties of the monomer/prepolymer/alkyd resin blends, it was found out that there was a peak by the polymerization induced phase separation when measuring the changes of viscosity and elasticity. It was also found out that such polymerization phase separation occurred in case that the alkyd resin contents were 20wt% and 30wt% and not found at the contents of 40wt%. Therefore, it would be desirable to maintain the contents of alkyd resin at less than 30wt% in order to use the polymerization induced phase separation.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.04a
• /
• pp.49-50
• /
• 2008

OCB mode has advantages such as fast response time and wide viewing angle. But it has inevitable shortcoming which initial splay state must be changed to bend state. To overcoming this problem, OCB cell filled LC with RM monomer was cured by UV when voltage applied. Through previously mentioned methods, even if electric field is none, bend state was made by stabilized LC director. In this paper, we investigated the electric characteristics of polymer stabilized OCB mode.

• Korean Chemical Engineering Research
• /
• v.50 no.2
• /
• pp.292-299
• /
• 2012

We made 8 wt% silica dispersion system with fumed silica and photo curable acrylic monomer by beads mill process. These dispersions could be applied in organic/inorganic hybrid coating systems. These dispersions could be applied in organic/inorganic hybrid coating systems. The 4 species of photo curable acrylic monomer which was presence of hydroxyl group, different solubility parameter, and different molecular size were used in the silica dispersions. Stability of polar solvent, isopropyl alcohol, in silica dispersions was investigated. We investigated the stability of silica dispersions by using steady-state and dynamic rheology. As the monomer has hydroxyl group increased in mono and binary monomer silica dispersions, they showed non flocculated stable sol (loss modulus (G")> storage modulus (G')). When polar solvent IPA was added into slightly flocculated silica dispersions, they changed to non flocculated stable sol.

• Textile Coloration and Finishing
• /
• v.19 no.5
• /
• pp.1-7
• /
• 2007

A new UV-curable coating was carried out to impart the flame-retardant property to cotton fabric using Bis[2-(methacryloyloxy)ehtyl]phosphate(DMEP) and 2-hydroxy-2-methyl-1-phenyl-propan-l-one(HMPP) as a UV-curable monomer and a photoinitiator, respectively. The cotton fabrics were applied with various amounts of DMEP and HMPP via padding and UV irradiation, and the optimal concentrations of DMEP and HMPP in the formulation were 40%(w/w) and 7%omp respectively. A limiteed oxygen index(LOI) up to 28.9 was obtained for the UV-cured fabric, which may occur through a condensed phase mechanism as verified by the increased residue number with increased application level. The characterization of the UV-cured coating was made by IR analysis, thermo-gravimetric analysis, LOI test, and scanning electron microscopy.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.06a
• /
• pp.293-294
• /
• 2009

We proposed a novel single gap transflective liquid crystal display (LCD) using liquid crystal with negative dielectric anisotropy. We designed cell structure driven by fringe electric field in the transmissive (T) part and vertical electric field in the reflective (R) part. In the device, high surface pretilt angle of the LC in the R-part is achieved through polymerization of an UV curable reactive mesogen (RM) monomer at surfaces. By optimizing the parameters, a newly developed transflective display has characteristics such as single gap and single gamma curve.