• 공업화학
• /
• 제24권3호
• /
• pp.231-238
• /
• 2013

본 연구에서 제조한 나노구형체 $TiO_2$는 자외선 차단 효과가 우수하면서도 노폐물 흡착을 하는 기능을 부여하기 위해 Sol-gel 방법으로 합성하였다. 다공성의 특성으로 높은 표면적에 의한 우수한 자외선 차단효과 및 흡착능력을 얻기 위해 pH를 조절하였다. 염기 처리한 $TiO_2$의 경우 가장 우수한 특성을 나타내었다. TGA로 글리세린을 흡착한 결과 1.16 mg의 높은 흡착 결과를 얻을 수 있었다. 또한 UV-A 영역에서 높은 반사율을 가지는 것을 확인하였다. 무기분체의 최적의 분산제를 찾기 위해 ester oil과 silicon oil를 사용하여 입도크기를 측정하였으며 180 nm정도의 입자로 약 6개월간 유지되었다. 이 결과를 통해, UV-A영역에서 우수한 능력을 가진 자외선 차단제로서 노폐물 흡착능력을 가진 $TiO_2$를 제조했으며 이로 인한 다양한 응용이 가능할 것으로 기대된다.

• 통합자연과학논문집
• /
• 제13권1호
• /
• pp.13-18
• /
• 2020

This study used cerium iron hydroxide nanoparticle with HEMA (2-hydroxyethyl methacrylate), the cross-linker EGDMA (ethylene glycol dimethacrylate), NVP (N-vinyl-2-pyrrolidone) and the initiator AIBN (azobisisobutyronitrile) for copolymerization. Also, the physical properties of the prepared lenses were compared, and their applicability as polymers for ophthalmic materials was experimented. The results of the measurement showed that the UV blocking rate and the wettability increased with the cerium iron hydroxide nanoparticles addition ratio, and the refractive index and water content were not affected. Thus, the produced copolymer is expected to be useful as a functional contact lens material while satisfying the basic physical properties of the hydrogel contact lens.

• 한국안광학회지
• /
• 제18권3호
• /
• pp.297-304
• /
• 2013

목적: 광원에 따른 청광차단렌즈의 청광차단율과 청광비율을 조사하고, 이를 활용한 청광차단렌즈의 처방에 대하여 고찰하였다. 방법: 광원에 따른 청광차단렌즈의 청광차단율과 청광비율의 조사를 위해 UV-VIS 분광광도계를, 청광차단렌즈와 관련된 처방을 평가하는 기준으로 태양광에 대한 청광비율을 이용하였다. 결과: 렌즈의 청광차단율과 청광비율은 광원에 따라 다르게 나타났다. 모든 BLU 광원의 청광비율은 태양광($D_{65}$ 광원)의 청광비율보다 큰 것으로 확인되었다. 태양광의 청광비율과 렌즈 투과광의 청광비율을 통해 각 광원에 적합한 청광차단렌즈들을 선별할 수 있었다. 결론: 청광차단렌즈 처방에 있어서 렌즈의 청광차단율과 청광비율이 광원에 의존하므로 사용자의 광원에 대한 문진이 선행되어야 한다. 태양광의 청광비율에 기준한 렌즈 투과광의 청광비율은 청광차단렌즈의 처방과 관련된 하나의 평가 방법으로 유용하게 활용될 수 있다.

• 한국세라믹학회지
• /
• 제52권5호
• /
• pp.384-388
• /
• 2015

We prepared blocking layers by adding 0.0 ~ 0.6 wt% nano diamond blends (DBs) to $TiO_2$ blocking layers to improve the energy conversion efficiencies (ECEs) of dye sensitized solar cells (DSSCs). TEM and micro-Raman spectroscopy were used to characterize the microstructure and phases of DBs, respectively. Optical microscopy and FE-SEM were used to analyze the microstructure of the $TiO_2$ blocking layer with DBs. UV-VIS-NIR spectroscopy was used to determine the absorbance of the working electrodes. A solar simulator and a potentiostat were used to determine the photovoltaic properties and the impedance of the DSSCs with DBs. From the results of the DBs analysis, we determined a 6.97 nm combination of nano diamonds and graphite. We confirmed that ECE increased from 5.64 to 6.48 % when the added DBs increased from 0.0 to 0.2 wt%. This indicates that the effective surface area and electron mobility increased when DBs were added to the $TiO_2$ blocking layer. Our results indicate that the ECE of DSSCs can be enhanced by adding an appropriate amount of DBs to the $TiO_2$ blocking layers.

• 한국염색가공학회지
• /
• 제22권1호
• /
• pp.71-76
• /
• 2010

In this study the optimum dyeing conditions and blocking effect of UV deodorization efficiency of Ligustrum japonicum Thunb were investigated. Colorants were water-extracted from Ligustrum japonicum Thunb fruit and freeze-drided to obtain colorants powder. The effects of dye concentration, dyeing temperature, dyeing time, and the number of dipping count were studied. Fastness to dry cleaning, rubbing, perspiration, and light were measured according to KS K 0644, KS K 0650, KS K 0715 and KS K 0700, respectively. In order to examine the dyeability according to dyeing conditions, reflectance of fabrics were measured by using UV/VIS spectrophotometer. The bath ratio was 1:20. Dyeing concentration was 100, 200, 300, 400 and 500% on the weight of fiber. Dyeing time was 20, 40, 60, and 80 minutes. Dyeing temperature was 20, 40, 60, 80, and $100^{\circ}C$. The infrared high pressure dying machine was used. As dyeing concentration increased, dye adsorption increased up to 400% and it slowed down. Dye uptake was increased with raising themperature up to $80^{\circ}C$ and it slowed down. Dye adsorption occurred rapidly at first 20 minutes and then it slowed down and reached almost maximum dye uptake at 60 min. Dye uptake increased by repeated dyeing. Therefore, it is considered that optimum dyeing condition is 400%(o.w.f.), $80^{\circ}C$, 60 min. And repeated dyeing improves dye uptake. Color fastness to dry cleaning and rubbing was good, but light fastness and perspiration fastness was not good. Blocking effect of ultraviolet radiation and deodorization efficiency was good.

• 대한화학회지
• /
• 제54권4호
• /
• pp.460-464
• /
• 2010

2-hydroxy-4-methoxy-benzophenone과 titanium(VI) isopropoxide를 나노 금과 나노백금을 사용하여 자외선 차단과 항균성을 갖는 기능성 콘택트렌즈를 제조하였다. 콘택트렌즈는 캐스트 몰드 법을 사용하여 제조하였으며, $70^{\circ}C$에서 약 40분, $80^{\circ}C$에서 약 40분 건조하였다. 마지막으로 $100^{\circ}C$에서 약 40분 열처리 공정을 거쳐 공중합 하였다. 물리적 특성을 측정한 결과 굴절률은 1.434 ~ 1.436, 함수율은 35.24% ~ 36.32% 그리고 가시광선 투과율은 88.3% ~ 90.8%를 나타내었다. 생성된 고분자는 콘택트렌즈를 제조하는 데에 필요한 물리적 특성을 만족하였으며, 안 의료용 기능성 소재로의 응용이 충분히 가능할 것으로 판단된다.

• Preventive Nutrition and Food Science
• /
• 제14권4호
• /
• pp.349-353
• /
• 2009

The effects of packaging materials on preserving the functional component of pine bud beverage stored under UV (ultraviolet) light exposure conditions were studied. The order of UV light blocking properties of the selected packages was: opaque can> opaque PET (polyethylene terepthalate) with green lamination=transparent PET with 10% PEN (polyethylene naphthalate) blending> transparent PET, and did not depend on film thickness in specified range. At 20${^{\circ}C}$, the order of preserving degree of original color and endobornyl acetate, which is quality index of pine bud beverage, was the same as above. Exposure to UV light can cause of deterioration of functional food components, but green color lamination and blending of PEN materials with transparent PET help to preserve the UV sensitive pine bud beverage components. However, the treated PET bottles have poorer preservation capabilities than the opaque cans. Transparent PET with PEN blending, in particular, will be very useful packaging material for colorful functional beverage preservation by helping to protect the ingredients while attracting consumer attention.

• Korean Membrane Journal
• /
• 제7권1호
• /
• pp.19-27
• /
• 2005

PP hollow fiber membrane was hydrophilized by EVOH dip coating followed by low temperature plasma treatment and UV irradiation. EVOH coating attained high water flux without any prewetting but its stability did not guaranteed at high water permeation rate. At high water permeation rate, water flux declined gradually due to swelling and delamination of the EVOH coating layer causing pore blocking effect. However, plasma treatment reduces the swelling, which suppress delamination of the EVOH coating layer from PP support result in relieving the flux decline. Also, UV irradiation helped the crosslinking of the EVOH coating layer to enhance the performance at low water permeation rate. FT-IR and ESCA analyses reveal that EVOH dip coating performed homogeneously through not only membrane surface but also matrix. Thermogram of EVOH film modified plasma treatment and W irradiation show that crosslinking density of EVOH layer increased. Chemical modification by plasma treatment and UV irradiation stabilized the hydrophilic coating layer to increase the critical flux of the submerged membrane.

• 한국세라믹학회지
• /
• 제52권4호
• /
• pp.294-298
• /
• 2015

Blocking layers with nano carbon blacks (NCBs) were prepared by adding 0.0 ~ 0.5 wt% NCBs to the $TiO_2$ blocking layer. Then, dye sensitized solar cells (DSSCs) were fabricated with a $0.45cm^2$ active area. TEM and micro-Raman spectroscopy were used to characterize the microstructure and phases of the NCBs, respectively. Optical microscopy and AFM were used to analyze the microstructure of the $TiO_2$ blocking layer with NCBs. UV-VIS-NIS spectroscopy was used to determine the band gap of the $TiO_2$ blocking layer with NCBs. A solar simulator and potentiostat were used to determine the photovoltaic properties and impedance of DSSCs with NCBs. The energy conversion efficiency (ECE) increased from 3.53 to 6.20 % when the NCB content increased from 0.0 to 0.3 wt%. This indicates that the effective surface area and electron mobility increased in the $TiO_2$ blocking layer with NCBs. However, the ECE decreased when the NCB content was increased to over 0.4 wt%. This change occurred because the effective electron transport area decreased with the addition of excessive NCBs to the $TiO_2$ blocking layer. The results of this study suggest that the ECE of DSSCs can be enhanced by adding the appropriate amount of NCBs to the $TiO_2$ blocking layer.

• 한국융합학회논문지
• /
• 제12권7호
• /
• pp.125-131
• /
• 2021

치과에서 사용횟수가 증가하고 있는 광중합형 레진 치료에는 강한 에너지를 가진 청색광이 필요하나, 그 빛은 산란 또한 커서 눈과 관련된 여러 부작용이 나타난다. 산란되는 빛에 노출되는 위험을 줄이고자 색깔 렌즈를 활용해보고자 하였다. 광중합기용 팁들과 청색광 빛의 차단에 효과가 있을 것으로 기대하는 시판용 노란색 계열의 청광 차단 렌즈와 노란색 염료로 착색한 노란색 렌즈를 UV-Vis 스펙트로미터 기기에 놓고 각각 청색광의 투과와 차단을 실험하였다. 결과로 광중합기용 팁들의 청광차단율 평균은 99.49%, 시판용 렌즈들 중 색 농도가 가장 높은 C 렌즈는 99.54%의 높은 청광차단율을 보였다. 노란색으로 착색한 렌즈의 경우에는 착색 농도가 가장 짙은 노란색 착색 C 렌즈가 87.57%의 청광차단율을 보였다. 레진 치료 시 광중합기용 팁과 함께 노란계열의 시판용 렌즈나 착색 렌즈를 착용한다면 청색광에 의한 눈과 관련된 부작용들을 줄일 수 있을 것으로 판단된다.