• 한국막학회:학술대회논문집
• /
• 한국막학회 1998년도 춘계 총회 및 학술발표회
• /
• pp.97-98
• /
• 1998

1. Introduction : Polypropylene(PP) membrane is widely used in the field of microfiltration and ultrafiltration. However, the hydrophobicity of PP causes the adsorption of hydrophobic and amphoteric solutes in the feed. Surface modification techniques of membrane through the treatment of hydrophilizing agents, coating of hydrophilic compounds, UV, plasma and high energy irradiation, etc. can have a great effect on propensities to prevent the protein from staining membranes. Among them, the modification to hydophilize membrane surface using UV is very simple and effective. Recently many studies for more effective surface modification have been conducted. Iwata et al. prepared membranes by grafting polyethylene glycol diacrylate macromer(PEGDA) onto polysulfone with plasma using a glow discharge reactor which prevent the oil from staining the membrane. The primary mechanism contributing to the membranes is preventing the oil from directly contacting the surface of the membrane as the PEGDA chains dissolved into emulsion. To evaluate their feasibility for use as a anti-fouling separation membrane, we prepared hydrophilic membranes by UV irradiation method and investigated their characteristics.

• 한국염색가공학회지
• /
• 제18권6호
• /
• pp.49-56
• /
• 2006

Surface treatment using UV irradiation was carried out to improve optical properties of polarizing films. The effects of UV energy of the UV-treated PVA films were investigated by measuring reflectance, surface roughness, contact angles, ESCA, and ATR. Reflectance decreased at wavelength of 450 nm or less and surface roughness increased with increasing UV energy. Water contact angle increased in the irradiated PVA films and surface energy decreased with increase in w energy. An analysis showed that the OH groups were broken and some new groups were introduced such as C=C and C=O bonds together with increased $O_{1s}/C_{1s}$, resulting in the observed surface modification effect. Surface modified PVA polarizing films showed improvement in light transmittance of polarizing films at high wavelength region without deteriorating polarization efficiency, which was not affected by UV irradiation sequence during manufacturing processes such as coloring and drawing.

• 한국레이저가공학회지
• /
• 제13권3호
• /
• pp.13-18
• /
• 2010

In this paper, polyimide (PI) surface was modified by UV Laser with a low laser fluence and investigated changes of surface geometry and chemical characteristics by SEM (scanning electron microscope), X-ray diffraction (XRD), XPS (x-ray photoelectron spectroscopy) and the measurements of contact angle of water. PI surface was peeled off and modified with microstructure fabrications by photochemical ablation over the laser fluence of 50 mJ/cm2. As laser fluence increased, delamination of PI surface was occurred largely and strongly. In chemical characteristics, the O/C and N/C atomic ratios increased and contact angle decreased from $80^{\circ}$ to $40^{\circ}$.

• 한국식품과학회지
• /
• 제1권1호
• /
• pp.45-50
• /
• 1969

자외부흡광 스펙트럼의 변화와 티 비 에이(TBA) 반응으로 살필 때, 수용액의 송에서의 말론알데하이드(malonaldehyde)는 과장 $260m/{\mu}$ 부근의 자외선조명에 의하여 광화학적 변화를 받는다. 이 용액에 아프라톡신(aflatoxin) 을 가하면 파장 $360m/{\mu}$ 부근의 광선에 의해서 이와 같은 변화가 재빨리 일어나며, 또 보통 형광등을 이용한 실험실의 조명에 의해서도 비록 그 변화는 느려지지만 마찬가지로 일어난다. 이과 같은 변화는 비가역적이며, 이 반응에서 아프라톡신은 다만 감광제로서의 역할을 한다. 또 이 반응의 기작은 말론알데하이드 분자의 평행적 이중결합체 형성에 의한 것 같다.

• 방재기술
• /
• 통권28호
• /
• pp.48-54
• /
• 2000

The technique detects radiant energy form a flaming fire of fuels contained carbonaceous material can be applied to fast growing fires. This technique applied detectors are ultimately effective when early detecting fire alarm system is required or the smoke and heat detectors can not applied. In Korea Fire regulation, a flame detector should be install in case that the installation height is higher than 20[m], chemical plant, hangar refinery. Therefore it is really necessary that a flame detector has to be developed as soon as possible. With foundation technique of flame detector, ideal sensing element and stable circuit design, a trial UV flame detector is manufactured. The stable and reliable technique of flame detector is established through the repeateed perfomance test and modification. An early detecting fire alarm device is developed through the modification, supplement of the structure and circuit. Results of the R & D for the manufacture of an excellent flame detecting device is carried out with the establishment of technique for the mass production and the qualified manufacturing process.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2002년도 추계학술발표대회 논문집
• /
• pp.15-19
• /
• 2002

In this work, the surface modification of carbon/epoxy composites was investigated using UV (ultraviolet ray) surface treatment to increase adhesion strength between the carbon/epoxy composites and adhesives. After UV surface treatment, XPS (X-ray photoelectron spectroscopy) tests were performed to analyze the surface characteristics of the carbon/epoxy composites. Comparing adhesion strengths with the surface characteristics, the effects of the surface modification of carbon/epoxy composites by UV surface treatments on the adhesion strengths were investigated.

• 약학회지
• /
• 제40권4호
• /
• pp.375-381
• /
• 1996

Five crystal modification of droperidol were prepared by recrystallization. They were characterized by UV spectrophotometer, DSC, and X-ray crystallography. Their dissolution pa tterns were also investigated. After storage of 2 months at 100% humidity, all polymorphic modifications were transformed.

• 한국염색가공학회:학술대회논문집
• /
• 한국염색가공학회 2010년도 제3회 국제학회
• /
• pp.47-47
• /
• 2010

• 한국염색가공학회지
• /
• 제16권1호
• /
• pp.10-17
• /
• 2004

Wool fabrics were treated with deep UV for 10 to 30min and then dyed with C.I. Acid Yellow 99, C.I, Acid Red 57 and C.I. Acid Blue 62. FT-IR and XPS have been used to prove the chemical composition of wool fiber surfaces. The mechanical property and colorfastness were also studied. The intencities of the peaks of C=O group at $1700^cm^{-1}$ were increased with increasing irradiation time. Relative $O_{1s},\; N_{1s}\; and\; S_{2p}$ intensities increased considerably and oxygen was incorporated in the form of CO and COO on the fiber surface. The dye uptakes of wool fabrics dyed with three acid dyes were proportional to irradiation times and in inversely proportional to irradiation distances. It was found that the tensile strength of wool fabrics were gradually deteriorated with the UV irradiation times. The colorfastness, such as washing, light and rubbing, of UV irradiated wool fabrics dyed with acid dyes were good.

• 한국염색가공학회지
• /
• 제21권5호
• /
• pp.16-20
• /
• 2009

Films of Poly(ethylene oxide), PEO, were modified to impart hydrophilicity via UV irradiation. The UV irradiation treatment produced new photo-oxidized groups of carbonyl and ether groups as indicated in ATR and ESCA analysis. It was found that water contact angle decreased from $15^{\circ}C$ to $10^{\circ}C$ and total surface energy of PEO increased from 54.2 mN/m to 76.6 mN/m with increasing UV energy, which was attributed to significant contribution of acid base interaction of the photo-oxidized PEO rather than nonpolar interaction originating from the dominant increase in Lewis acid parameter. The increased hydrophilicity and surface energy were also proved by the decreased water wetting time.