• 제목/요약/키워드: UV Absorption

검색결과 1,095건 처리시간 0.032초

자외선 흡수제 처리 면직물의 소비성능 개선(제1보) - 자외선 차단성능에 관한 연구 - (A Study on the UV-cut Properties of Cotton Fabrics Treated with UV-absorber)

  • 강미정;권영아
    • 한국의류학회지
    • /
    • 제25권5호
    • /
    • pp.925-932
    • /
    • 2001
  • The influence of ultraviolet(UV)-ray in sun light on human skin has been noted. Textiles can provide protection against harmful UV-radiation. Normally UV-absorbing finishes are used to get better protection. The purpose of this study is to evaluate the UV-cut properties of cotton fabrics treated with UV-absorber. 2,2-dihydroxy-4,4-dimethoxbenzophenone, as UV-absorber was applied to 100% cotton fabric. Reagents added in finishing solution were Triton X-100, polyethylene glycol 400, and $MgCl_2{\cdot}6H_2O$, and C.I. Direct Red 81. Both untreated and treated cotton fabrics were exposed to a xenon arc lamp for 20 and 80 hours. UV absorption spectra of finishing solutions and UV transmission spectra of fabrics were measured by the UV/VIS spectrophotometer. The results of this study can be summarized as follows. The results of this study can be summarized as follows. Absorption and the related transmission spectra were modified in a controlled way with UV-absorber. Absorption effect of UV-absorber was improved by adding Triton X-100, PEG 400, and $MgCl_2{\cdot}6H_2O$ in finishing solution. The UV absorption of finishing solution was in the following order: U/D/T/P/M>D/T/P/M> D/T> D/P, D>U/T/P/M>U/T>T/P/M>T. The UV transmittance of cotton fabrics was remarkably decreased by the application of UV-absorber and additives. The UV-cut properties were most improved by the application of U/D/T/P/M.

  • PDF

Magnetic and Photo-catalytic Properties of Nanocrystalline Fe Doped $TiO_2$ Powder Synthesized by Mechanical Alloying

  • Uhm, Y.R.;Woo, S.H.;Lee, M.K.;Rhee, C.K.
    • 한국분말야금학회:학술대회논문집
    • /
    • 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part2
    • /
    • pp.955-956
    • /
    • 2006
  • Fe-doped $TiO_2$ nanopowders were prepared by mechanical alloying (MA) varying Fe contents up to 8.0 wt.%. The UV-vis absorption showed that the UV absorption for the Fe-doped powder shifted to a longer wavelength (red shift). The absorption threshold depends on the concentration of nano-size Fe dopant. As the Fe concentration increased up to 4 wt.%, the UV-vis absorption and the magnetization were increased. The benefical effect of Fe doping for photocatalysis and ferromagnetism had the critical dopant concentration of 4 wt.%. Based on the UV absorption and magnetization, the dopant level is localized to the valence band of $TiO_2$.

  • PDF

자외선 흡수제 처리에 의한 면직물의 자외선 차단 효과 (UV-Cut Effects of Cotton Fabrics Treated with UV Absorbents)

  • 지영숙;김상희
    • 한국의류학회지
    • /
    • 제18권5호
    • /
    • pp.622-627
    • /
    • 1994
  • The purpose of this study is to investigate the adsorption rate, adsorption quantities and the UV-Cut effects of cotton fabrics treated with several UV absorbents. The result of this study were as follows: cotton fabric treated with 2,2'-dihydroxy-4- methoxy-benzophenone shows more efficient than ones treated with 4-aminobenzoic acid and 2·hydroxy-1, 4-naphthoquinone in UV absorption. This may be due to the absorption of UV light by formation of intra moleculaar hydrogen bond. The formation of hydrogen bonds between hydrogen atoms of two hydroxy groups and one oxygen atom of carboxyl group in 2, 2'-dihydroxy-4-methoxy-benzophenone would be easier than that of the other absorbents. The adsorption isotherms of 4-aminobenzoic acid and 2-hydroxy-1, 4-naphthoquinone were similar to Freundlich type, while that of 2, 2'-Dihydroxy-4-methoxy-benzophenone was Henry type. Cotton fabrics treated with Antifade MC-100 and W Cut I-2 were just alike in UV absorption, but Antifade 8001 was inferior to the others.

  • PDF

자외선 강도 산정 모델과 영향 인자에 관한 연구 (A Study on the UV Intensity Models and their Affecting Factors)

  • 김두일;최영균;김성홍
    • 상하수도학회지
    • /
    • 제22권4호
    • /
    • pp.421-427
    • /
    • 2008
  • UV disinfection is widely used in water treatment facilities and wastewater treatment plant because of its effectiveness to removal of pathogen and Giardia which is resistant to traditional chemical disinfection. As a design and performance tool of UV disinfection system, 3 dimensional UV intensity models were composed and simulated to compare each other and to find affecting factors in this study. Reflection, refraction and absorption are important parameters in UV intensity model and MPSS and MSSS model can reflect these parameters while LSI model can not. Absorption is the most important parameters among the reflection, refraction, absorption and shadowing so, this should not be neglect. Based on this simulation, shadowing effect is negligible when the number of installed lamp is a few but, this effect can not be neglectable when the number of installed lamp is quite a few. The errors according to shadowing effect is increased as the number of lamp installed increased.

전기분해와 UV 조사에 의한 수중 Rhodamine B의 제거(II) (Removal of Rhodamine B in Water by Ultraviolet Radiation Combined with Electrolysis(II))

  • 김동석;박영식
    • 한국환경과학회지
    • /
    • 제18권6호
    • /
    • pp.667-674
    • /
    • 2009
  • This study has carried out to evaluate the effect of NaCI as electrolyte of single (electrolysis and UV process) and complex (electrolysis/UV) processes for the purpose of removal and mineralization of Rhodamine B (RhB) dye in water. It also evaluated the synergetic effect on the combination of electrolysis and UV process. The experimental results showed that RhB removal of UV process was decreased with increase of NaCl, while RhB removal of electrolysis and electrolysis/UV process was increased with increase of NaCI. The decolorization rate of the RhB solution in every process was more rapid than the mineralization rate identified by COD removal. The latter took longer time for further oxidation. Absorption spectra of an aqueous solution containing RhB showed a continued diminution of the RhB concentration in the bulk solution: concomitantly, no new absorption peaks appeared. This confirmed the decolorization of RhB, i.e., the breakup of the chromophores. It was observed that RhB removal in electrolysis/UV process is similar to the sum of the UV and electrolysis. However, it was found that the COD of RhB could be degraded more efficiently by the electrolysis/UV process than the sum of the two individual process. A synergetic effect was demonstrated in electrolysis/UV process.

자외선에 의해 자외선 차단 효율이 상승하는 선크림 제형 개발 (Development of a Sunscreen Formulation that Increases UV Blocking Ability by UV Light)

  • 최민성;조형진;송경희;송승진;강내규;박선규
    • 대한화장품학회지
    • /
    • 제45권2호
    • /
    • pp.139-150
    • /
    • 2019
  • 자외선에 의해 자외선 차단 효율이 상승하는 선크림에 대한 연구를 수행하였다. Ethylhexyl methoxycinnamate (OMC)는 가장 널리 쓰이는 자외선 차단제이고, OMC에 대한 광안정성 연구는 오랫동안 수행되어왔다. OMC는 자외선에 의해 trans구조가 cis구조로 변하거나, dimer를 비롯한 광반응물을 생성하여 자외선 차단효율이 떨어진다고 알려져 왔다. 하지만 본 연구에서는 OMC나 isoamyl p-methoxycinnamate(IMC)와 같이 메톡시신나메이트 구조를 공유하는 자외선 차단제들이 실제 사용조건과 유사한 조건에서 자외선에 노출 시키고 잘 설계된 실험 방법으로 in vitro SPF 수치를 측정하였을 때 오히려 자외선 차단 효율이 증가하는 것을 발견하였다. 이것은 자외선에 의해서 생성된 광반응물과 OMC간의 ${\pi}-{\pi}$ stacking을 통한 ${\pi}-{\pi}^*$ 전이 에너지 변화(UV activated transition) 때문인 것으로 생각된다. 이 발견을 선크림 개발에 적용하기 위해서는 함께 사용되는 에몰리언트의 극성 및 상용성을 적절히 고려해야 한다. 상용성이 좋은 극성 에몰리언트를 포함하면 자외선에 의해 OMC가 광반응물을 생성하지 않기 때문에 발견의 효과가 감소하는 것으로 보인다. 이러한 작용 기전(UV activated SPF boosting)을 바탕으로 상업용 수준의 선크림을 제조하여 평가해보았다. 그 결과 자외선(2 MED)에 노출되었을 때 in vitro SPF 수치는 50.69에서 72.33으로 42.69%로 증가하였고 in vivo SPF 평가에서는 53.7을 얻어 같은 조건의 대조군의 선크림(SPF 34.4 이하) 대비 56.10% 이상 높게 측정되었다. 따라서 OMC와 IMC가 특정 조건에서 UV sensor처럼 작용하여, 자외선에 노출 되었을 때 자외선 차단 효율을 높일 수 있는 선크림을 제조할 수 있었다.

사이징과 고해에 따른 종이의 열화기구(제2보) -고해의 영향- (Deterioration Mechanism of Paper According to Sizing and Beating (II) -Influences of Beating-)

  • 김봉용
    • 펄프종이기술
    • /
    • 제31권2호
    • /
    • pp.58-63
    • /
    • 1999
  • Three kinds of papers were prepared from different beating degree of pulps. Physical and optical properties were examined to elucidate the deterioration mechanism of paper according to beating degrees. Changes of double folds, elongation, water retention value, DP, K/S value and visible, UV region light absorption spectra of those papers treated by UV light were studied. Double folds and brightness were decreased more rapidly by UV treatment with increasing of beating degree. The light absorption rates of pulps in visible and UV region were also increased with change of beating level. The formation of new hydrogen bonds and higher light absorption rate of pulps according to beating induced to absorb and interact with much UV light. These phenomena maybe brought about to accelerate paper deteriortion by UV treatment both optical and physical properties.

  • PDF

광흡수단을 제어를 이용한 UV 차단렌즈 개발 (UV-cut Lens Manufacture using Optical Absorption Edge Control)

  • 김용근;박동화;성정섭
    • 한국안광학회지
    • /
    • 제7권1호
    • /
    • pp.29-34
    • /
    • 2002
  • Venzotriazol계를 증류수로 희석(5%)하여 만든 UV 차단 출발액을 dip 방법으로 각각 1, 2, 5, 15, 20, 30분 간격으로 유지시켜 UV 차단렌즈의 시료를 제작하였다. 각 시료에 대한 광 투과율의 spectrum은 320~450nm 영역에서 측정하였다. 그 결과 광흡수 edge는 각각 403, 408, 414, 419nm 영역이며, 각각 3.07, 3.04, 2.99, 2.96eV의 band에서 흡수 edge가 나타났다. UV 차단 렌즈 출발용액은 benzophenone계의 2-Hydroxy-4-n-octoxybenzo-phenone를 methanol에 녹여 5%, 10%을 만들고, UV 차단 렌즈는 Spray pyrolysis method로 만들었다. 등 간격으로 분무한 각 렌즈의 투과 광의 edge는 spectra에서 거의 등 간격을 보였다. 2, 4, 6분 동안 분무할 때의 광 흡수 edge는 385, 398, 417nm 영역이며, band는 각각 3.22, 3.11, 2.97eV를 이루고 있다.

  • PDF

화염분무열분해법을 이용한 이산화세륨 나노분말 제조 (Preparation of CeO2 Nanoparticles using Flame Spray Pyrolysis)

  • 김선경;박수련;장한권;장희동
    • 한국입자에어로졸학회지
    • /
    • 제12권2호
    • /
    • pp.37-42
    • /
    • 2016
  • $CeO_2$ nanoparticles were prepared by a flame spray pyrolysis from aqueous solution of cerium nitrate. The morphology, structure crystallinity and specific surface area of as-prepared nanoparticles were characterized by transmission electron microscopy (TEM), X-ray diffraction (XRD), and Brunauer-Emmett-Telle (BET). The $CeO_2$ nanoparticles about 5 nm in diameter showed a cubic fluorite structure and polyhedral morphology. The average particle size increased as the cerium nitrate concentration increased. UV absorption performance of the as-prepared nanoparticles was measured by UV-visible spectroscopy. UV absorption of $CeO_2$ nanoparticles was more effective than that of commercial $TiO_2$ nanoparticles. Effect of dopants such as Ti and Zn to $CeO_2$ nanoparticles on UV absorption properties was also investigated. In case of $Ti/CeO_2$, and $Zn/CeO_2$ nanoparticles, they showed a little higher UV absorption values compared with $CeO_2$ nanoparticles. The as-prepared nanoparticles can be promising materials with high UV absorption value.

Spectroscopic Studies on the Oxidation of Catechin in Aqueous Solution

  • Bark, Ki-Min;Yeom, Ji-Eun;Yang, Jeong-Im;Yang, Ik-Jun;Park, Chul-Ho;Park, Hyoung-Ryun
    • Bulletin of the Korean Chemical Society
    • /
    • 제32권9호
    • /
    • pp.3443-3447
    • /
    • 2011
  • The spectroscopic behavior of catechin (5,7,3',4'-tetrahydroxyflavan-3-ol), has been studied in the presence and the absence of air using UV-vis absorption spectrophotometry and fluorescence spectroscopy. The UV-vis absorption spectrum of catechin shows a very sharp and strong absorption maximum peak at 275 nm in deaerated water. New absorption maximum peaks appeared in aerated water, as well as in basic aqueous solution, caused by the oxidation of catechin. The absorbances in the UV-vis absorption spectrum of catechin decreased when the solution was left in the dark for a long time. The fluorescence emission spectrum of catechin after a long time period differs markedly from that in freshly prepared solution; the fluorescence maxia shifted as time passes after adding catechin to the solutions. When the deaerated basic catechin solutions were left in the dark for a long time, their fluorescence quantum yields were found to be nearly zero. This suggests that the oxidized catechin molecules were seen to have slowly undergone successive chemical reactions in basic buffer solution.