• 제목/요약/키워드: UV -Vis spectra

검색결과 325건 처리시간 0.068초

Cycloamine 계의 팔라듐 착물의 합성과 그 화학적 성질 (The Preparation and its Chemical Properties of Palladium Complexes with a series of Cycloamine)

  • 오상오;정덕영
    • 대한화학회지
    • /
    • 제29권4호
    • /
    • pp.406-413
    • /
    • 1985
  • 이미 연구된 황 및 질소를 배위자로 가지는 금속 착물의 항종양 활성에 근거하여 sulfoxide와 cycloamine계의 Pd(II) 착물들을 합성하였고 이들에 대한 확인과 성질은 다음과 같다. 원소 분석 및 질량 분석으로써 착물에 대한 존재원소의 함량과 분자량을 측정하였고, 가시 및 자외선 스펙트라와 핵자기 공명 스펙트라로부터 배위자와 금속간의 결합을 확인하였고, 적외선 스펙트라로부터는 배위자의 배위 자리와 그 구조를 추정하였다. 이들 착물은 노란색 결정으로 메탄올과 클로로포름에 녹으며 물과 그 밖의 일반 유기용매에는 잘 녹지 않는다.

  • PDF

전혈의 SPECTRUM 측정과 분석 (Analysis and Measurement of the Spectrum of Whole Blood)

  • 김연주;김흥식;김종원;윤길원;김원기
    • 대한의용생체공학회:학술대회논문집
    • /
    • 대한의용생체공학회 1996년도 춘계학술대회
    • /
    • pp.52-55
    • /
    • 1996
  • The spectra of whole blood EDTA samples from two people were generated using a CARY 5E (UV-VIS-NIR) spectrophotometer from 400 to 1000nm which contain visible and NIR region. Only the data between 400 and 800nm were used to analyze the components of blood. Using the same spectrophotometer, the spectra of Water, normal saline, plasma were generated These spectra were subtracted from each blood sample, and then the first derivative of each of the subtracted data was taken to minimize baseline variations and indicated the wavelength-shift of peak and valley. Normalization and division between two blood samples were used to correlate the quantity ratio of specific components with feature of spectra. Samples were controlled at $30^{\circ}C,\;37^{\circ}C$, ambient temperature.

  • PDF

유기전하 이동착물 Langmuir-Blodgett막의 누적조건 및 누적확인에 관한 연구 (Deposition condition and Confirmation of Organic Charge Transfer complex Langmuir-Blodgett Film)

  • 정순욱
    • 한국응용과학기술학회지
    • /
    • 제14권1호
    • /
    • pp.89-93
    • /
    • 1997
  • In this research, ultra-thin films of organic charge transfer complex were deposited on to ordinary microscope slide-glass subtrates with a Langmuir-Blodgett technique. ${\pi}$-A isotherm characteristics of these complex were studied in order to find optimum conditions of deposition by varying temperature of subphase, compression speed, and spreading amount. Transfer ratio of these films were studied during the process of deposition. The UV-visible absorbance spectra of LB films were measured to find state of deposition by varing layer number. The observed optimum conditions of surface, pressure, spreading amount, and dipping speed for depositing LB films(Y-type) were 38m/Nm, $150{\mu}l$ and 5mm/min, respectively. Since the tansfer ratio is close to 100%, the monolayer on the subphase seems to be well transferred to the solid substrate. The thickness of the film was well-controlled as the UV-vis absorbance of films were changed linear according to the number of layers.

니트릴작용기의 치환이 몇가지 이온성 액체의 물리적 특성에 미치는 영향 (Effects of Nitrile Group Substitution on the Physical Properties of Some Ionic Liquids)

  • 안범수
    • 한국응용과학기술학회지
    • /
    • 제31권2호
    • /
    • pp.225-230
    • /
    • 2014
  • Several nitrile-functionalized ionic liquids have been prepared and characterized. An attempt was made to systematically characterize nitrile-functionalized ionic liquids on the basis of a few kinds of cations and anions. The detailed comparison of the differences in physicical characteristics such as UV-Vis spectroscopy, thermal stability, viscosity, solubility property, and electrochemical property before and after incorporation of a nitrile group were studied. The results showed that the incorporation of a nitrile group to cations could result in remarkable changes in these properties.

Langmuir-Blodgett법을 이용한 (N-docosyl quinolinium)-TCNQ(1:2) 착물의 초박막 제작 (Fabrication of Ultra Thin Films with (N-docosyl quinolinium)-TCNQ(1:2) complex by the Langmuir -Blodgett Technique)

  • 정순욱;정회걸
    • 한국재료학회지
    • /
    • 제9권12호
    • /
    • pp.1229-1233
    • /
    • 1999
  • 본 연구에서는 (N-docosyl quinolinium)-TCNQ (1:2) 착물의 LB초박막을 제작하였다. LB막의 누적을 위한 최적조건을 구하기 위하여 subphase 온도, barrier 압축속도 및 분산량을 변화시키면서 표면압-면적(${\pi}$-A) 등온선 특성을 측정하였다. 그리고 전이비, UV-vis의 최대 흡광도, 정전용량 및 두께를 측정하여 LB막의 누적상태를 확인하였다. 그 결과 분자수준으로 잘 제어된 양호한 LB막이 제작되었음을 알 수 있었다..

  • PDF

한국산 유색미에서 분리한 안토시아닌의 화학구조 (Chemical Structure of the Major Color Component from a Korean Pigmented Rice Variety)

  • 조만호;백영숙;윤혜현;한태룡
    • Applied Biological Chemistry
    • /
    • 제39권4호
    • /
    • pp.304-308
    • /
    • 1996
  • 한국산 유색미(Oryza sativa var. Suwon 415)의 주요색소를 Amberlite XAD-7 및 종이 크로마토그래피를 이용하여 분리하였다. 분리된 색소를 종이 크로마토그래피, UV/Vis 및 NMR 분광분석한 결과 안토시아닌으로 밝혀졌다. 분리된 안토시아닌은 UV/Vis 스펙트럼에서 529nm와 281nm에서 최대 흡광도를 보였고 $A_{440}/A_{529}$는 23%였다. 따라서 이 안토시아닌에는 3-glycoside가 존재함을 알 수 있다. 산 가수분해로부터 얻은 aglycone은 $AlCl_3$ 존재하에서 18nm의 bathochromic shift를 보였다. 이 결과는 분리된 안토시아닌에 cyanidin, delphinidin, petunidin 또는 luteolinidin과 같이 둘 이상의 hydroxyl group이 근접하여 존재함을 의미한다. 종이 크로마토그래피를 이용해 분석한 결과, 안토시아닌의 산 가수분해로부터 해리된 당은 포도당으로 확인되었다. NMR 분광분석결과 aglycone은 cyanidin이며 포도당은 ${\beta}-D-configuration$을 갖는 것으로 생각된다. 이상의 결과로부터 분리된 안토시아닌의 화학구조는 cyanidin $3-O-{\beta}-D-glucopyranoside$로 결정되었다.

  • PDF

설폰아미드계 항생물질의 오존산화분해에 대한 계산화학적 해석 및 실험적 검증 (Degradation of Sulfonamide Antibiotic Substances by Ozonation: An Experimental and Computational Approach)

  • 원정식;임동희;서규태
    • 대한환경공학회지
    • /
    • 제36권6호
    • /
    • pp.442-450
    • /
    • 2014
  • 본 연구에서는 상수원에서 문제시 되고 있는 미량오염물질의 처리에 대한 연구를 하기 위해선 많은 시간과 비용이 소요되는데, 이를 절감하기 위한 대안으로 양자화학적 기반의 범밀도함수이론(Density Functional Theory, DFT)을 활용하여 물질간의 상호 반응성 및 분해과정을 해석하였다. 본 연구에서 다루고 있는 물질은, 최근 낙동강 수계에서 빈번히 검출되고 있는 Sulfonamide 물질 3종(sulfamethazine, sulfathiazole, sulfamethoxazol)을 선정하였으며, 이론적인 연구로는 DFT모델링, 실험적 연구로는 UV-VIS 및 FT-IR 등의 분광분석을 하여 비교 및 검증을 하였다. DFT모델링을 실시한 결과 Sulfonamide물질의 HOMO(highest occupied molecular orbital)와 오존의 LUMO (lowest unoccupied molecular orbital) 사이에서 반응이 가장 유리하며, Sulfonamide 물질의 HOMO를 가시화 한 결과 Sulfanilamide기에서 전자밀도가 높게 나타나므로 Sulfanilamide기에서 반응이 활발할 것이라 예측되었다. UV-VIS 실험결과 260 nm에서 Sulfanilamide기가 검출되었으며, 오존산화시 검출된 Sulfanilamide기가 빠르게 사라짐을 알 수 있었다. FT-IR분석결과로써 Sulfanilamide기에서도 그 한 부분인 아민기(N-H)에서 가장 활발한 제거반응이 일어남을 알 수 있었으며 이러한 결과로부터 DFT모델링 방법을 통해서 정수처리 공정에 대해서 반응을 예측할 수 있음을 확인하였다.

Enhanced Self-Cleaning Performance of Ag-F-Codoped TiO2/SiO2 Thin Films

  • Kim, Byeong-Min;Kim, Jung-Sik
    • 한국재료학회지
    • /
    • 제28권11호
    • /
    • pp.620-626
    • /
    • 2018
  • Highly self-cleaning thin films of $TiO_2-SiO_2$ co-doped with Ag and F are prepared by the sol-gel method. The asprepared thin films consist of bottom $SiO_2$ and top $TiO_2$ layers which are modified by doping with F, Ag and F-Ag elements. XRD analysis confirms that the prepared thin film is a crystalline anatase phase. UV-vis spectra show that the light absorption of $Ag-F-TiO_2/SiO_2$ thin films is tuned in the visible region. The self-cleaning properties of the prepared films are evaluated by a water contact angle measurement under UV light irradiation. The photocatalytic performances of the thin films are studied using methylene blue dye under both UV and visible light irradiation. The $Ag-F-TiO_2/SiO_2$ thin films exhibit higher photocatalytic activity under both UV and visible light compared with other samples of pure $TiO_2$, Ag-doped $TiO_2$, and F-doped $TiO_2$ films.

Low Temperature Synthesis and Characterization of Sol-gel TiO2 Layers

  • Jin, Sook-Young;Reddy, A.S.;Park, Jong-Hyurk;Park, Jeong-Young
    • 한국진공학회:학술대회논문집
    • /
    • 한국진공학회 2011년도 제41회 하계 정기 학술대회 초록집
    • /
    • pp.353-353
    • /
    • 2011
  • Titanium dioxide is a suitable material for industrial use at present and in the future because titanium dioxide has efficient photoactivity, good stability and low cost [1]. Among the three phases (anatase, rutile, brookite) of titanium dioxide, the anatase form is particularly photocatalytically active under ultraviolet (UV) light. In fabrication of photocatalytic devices based on catalytic nanodiodes [2], it is challenging to obtain a photocatalytically active TiO2 thin film that can be prepared at low temperature (< 200$^{\circ}C$). Here, we present the synthesis of a titanium dioxide film using TiO2 nanoparticles and sol-gel methods. Titanium tetra-isopropoxide was used as the precursor and alcohol as the solvent. Titanium dioxide thin films were made using spin coating. The change of atomic structure was monitored after heating the thin film at 200$^{\circ}C$ and at 350$^{\circ}C$. The prepared samples have been characterized by X-ray diffraction (XRD), scanning electron microcopy, X-ray photoelectron spectroscopy, transmission electron microscopy, ultraviolet-visible spectroscopy (UV-vis), and ellipsometry. XRD spectra show an anatase phase at low temperature, 200$^{\circ}C$. UV-vis confirms the anatase phase band gap energy (3.2 eV) when using the photocatalyst. TEM images reveal crystallization of the titanium dioxide at 200$^{\circ}C$. We will discuss the switching behavior of the Pt /sol-gel TiO2 /Pt layers that can be a new type of resistive random-access memory.

  • PDF

Bohemite 나노졸을 이용한 내구성 코팅재료의 제조와 특성에 관한 연구 (Preparation and Characterization of Hard Coating Materials Based on Silane Modified Boehmite Hybrid Materials)

  • 전성재;김웅;이재준;구상만
    • 공업화학
    • /
    • 제17권6호
    • /
    • pp.580-585
    • /
    • 2006
  • Boehmite 나노졸을 이용하여 자외선 및 열 경화가 동시에 가능한 내구성 코팅재료를 제조하였다. Boehmite (AlOOH) 나노입자에 3-(trimethoxysilyl)propylmethacrylate, (3-glycidyloxypropyl)trimethoxysilane 등의 유기 실란 커플링제를 혼합하는 sol-gel법으로 내구성 코팅 재료를 만들었다. 최초 boehmite 입자가 물에서만 분산 가능하였던 반면, 유기 실란이 도입된 입자는 알코올, tetrahydrofuran, acetonitrile 등의 유기 용매에서도 분산 가능케 되어 코팅 공정상 넓은 응용이 가능하게 되었다. 코팅 박막은 spin 코팅 방식을 이용하여 다양한 기질에 제조되었으며 제조된 박막은 FT-IR, Si/Al CP MAS NMR, UV-Vis spectrophotometer, 연필 경도계 및 FE-SEM, Taber abraser 등의 다양한 방법을 통하여 분석을 실시하였다. 유기실란의 배합 비율을 조절하여 최적화된 경도와 투명성을 갖는 박막을 얻었다. 또한 플라즈마로 전처리된 PMMA기질을 이용한 실험을 통하여 전처리의 효과성을 논의하였다.