• Proceedings of the KAIS Fall Conference
• /
• 2010.11a
• /
• pp.291-293
• /
• 2010

알카리성 과황산칼륨을 이용한 자외선 흡광광도법은 수중의 총질소를 간편하면서도 신속하고 정확하게 분석할 수 있는 방법으로 각각의 질소성분을 standard method에 의해 분석한 후 이들을 합산하는 방법보다 회수율이 좋게 나타났다. 자외선 흡광광도법을 이용할 경우 Cr(VI)이온과 Br이온에 의해 방해를 받으므로, Br이온을 다량 함유하는 해수의 총질소 분석방법으로는 적합하지 않은 것으로 관찰되었다. 전처리를 한 후 220 nm에서 흡광도를 측정하기 위해서는 탄산염의 방해를 방지하기 위해 pH를 2~3으로 조절한 후 분석해야만 하고, 알카리성 과황산칼륨을 이용한 자외선 흡광광도법은 총질소를 분석하는 방법으로 우수성이 입증되었으나 각 형태별 질소의 농도를 측정할 수 없는 단점이 있으므로 각 형태별 질소의 농도를 측정하기 위해서는 standard method를 이용해야 된다. 본 연구에서 알카리성 과황산칼륨을 이용한 자외선 흡광광도법은 총질소를 분석하는데 있어서 standard method에 의한 합산법보다 시간과 노력을 절약할 수 있는 것으로 검토되었다.

• Proceedings of the KIEE Conference
• /
• 2009.07a
• /
• pp.2119_2120
• /
• 2009

전압을 인가하였을 때 전계방향에 의해 가역적으로 색이 변화하는 현상을 전기변색(electrochromism)이라고 한다. 이러한 전기채색현상을 보이는 물질을 전기채색물질(electrochromism materials)이라고 하며, 전기채색 물질에 의한 소자를 전기채색소자(electrochromism device : ECD)라고 한다. 전기채색현상은 투과율(transmittance), 반사율(reflectance)의 가역적이며 가시적인 변화이고, 전기화학적인 산화환원 반응과 관련이 있다. 따라서 본 연구에서는 Titanate nanotube(TNT)를 제조하고 전기변색소자(ECD)에 응용하였다. SEM, XRD, UV-Vis등을 이용하여 재료학적 분석을 시행하였으며, 전기화학적 테스트로 cyclic voltammetry를 측정 하였다. 그 결과 TNT 분말은 직경 약 20~30 nm, 길이 약 500~600 nm 의 입자형상을 나타내었으며, X-선 회절시험결과 $H_2Ti_2O_5{\cdot}H_2O$의 층상구조를 나타내었다. 제조된 막은 FTO glass 위에 PEI/(TNT/TBAOH)$_{n-1}$/PDDA의 순으로 코팅되었다. 전기화학적 테스트를 위하여 2전극 시스템을 제작하였으며, 여러 종류의 액체 전해질을 제작하여 cycle voltammetry를 시행하였다. 그 결과, 각각의 전해질에서 "-"영역의 산화환원전위 피크가 뚜렷하게 나타났으며, 짙은 갈색으로의 채색현상을 나타냈다. 본 연구의 결과로서 TNT 박막을 이용한 ECD은 광조절 유리로서 뿐만 아니라, 여러 전기채색 디바이스에 응용될 것으로 사료된다.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.10 no.4
• /
• pp.76-81
• /
• 2011

UV imprinting process can manufacture high-functional optical components with low cost. If hard polymers can be used as transparent molds at this process, the cost will be much lower. However, there are limited researches to predict the machinability and the burr of hard polymers. Therefore, a new method to predict them by analyzing load-depth curves which can be obtained by the instrumented indentation test was developed in this study. The load-depth curve contains elastic deformation and plastic deformation simultaneously. The ratio of the plastic deformation over the sum of the two deformation is proportional to the ductility of materials which is one of the parameters of the machinability and the burr. The instrumented indentation tests were performed on the transparent molds of the hard polymers and the values of ratio were calculated. The machinability and the burr of three kinds of hard polymers were predicted by the ratio, and the prediction was in agreement with the experimental results from the machined surfaces of the three kinds of hard polymers.

• Korean Journal of Veterinary Pathology
• /
• v.1 no.1
• /
• pp.40-45
• /
• 1997

The phototoxic potentials of LB20304a a new quinolone compound being developed by LG Chemical Ltd, and reference compounds (Ciprofloxacin; CPFX, Enoxacin; ENX and Lomefloxacin; LFLX) were compared in a murine model. in addition photostability of these compunds was studied after irradiation with long-wave UV light(UVA, 0, 0.3 1 or 3 Joule/$Cm^2$) When hairless mice(9 to 11 weeks old 19-26g) were orally administered with different dose levels of test compunds and exposed to UVA(40J/$cm^2$) inflammatory reactions were observed in a dose dependent manner. Among the compounds tested, LB20304a demonstrated the least phototoxic effects and showed no inflammatroy lesions at a dose level of 100mg.kg (Low dose). ENX and LFLX demonstrated much greater phototoxic reactions while CPFX showed similar or slightly greater phototoxic reactions compared to LB20304a. Similar to the in-vivo results the solutions of LB20304a and CPFX irradiated with UVA demonstrated reduced spectral changes compared to those of ENX and LFLX. In conclusion these data suggest that phototoxic potencies of the quinolones tested were; LFLX > ENX > CPFX $\geq$ LB20304a. No phototoxic dose of LB20304a in mice was 100 mg/kg.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.42 no.3
• /
• pp.338-343
• /
• 1997

The response of seventy-five rice cultivars to ozone (O$_3$) were tested in the open-top chamber with ozone producing and monitoring system to determine the varietal difference of resistance to $O_3$ stress. Ozone was produced by electrostatic discharge in oxygen and was monitored by UV absorption ozone analyzer. Difference in response of rice to ozone was more clearly appeared on rice plants treated for 2 to 4 hours at 0.3 ppm concentration of $O_3$. Varietal resistance of rice to ozone was more distinctly classified at 21- to 35-day seedlings compared with 14-day rice plants. Most of indica and Tongil(indica$\times$japonica) type rice cultivars were more resistant than that of japonica cultivars based on the leaf injury to $O_3$. Eight Korean cultivars belong to japonica groups showed highly resistant reaction to $O_3$. Ozone exposure during booting stage caused lower grain fertility than exposures during seedling, maximum tillering and heading stages of rice.

• The Korean Journal of Food And Nutrition
• /
• v.13 no.4
• /
• pp.360-364
• /
• 2000

We studied the degree of rancidity of linoleic acid for the electrochemical redox reaction in time course and the kinetic parameters. The current of the linoleic acid was increased and the potential was shifted to the positive potential when scan rates were faster. The redox reaction of the linoleic acid was proceeding to totally irreversible and diffusion controlled reaction. From these results, diffusion coefficient(D$\_$o/) of linoleic acid was observed to 2.61$\times$10$\^$-6/ ㎠/s in the 0.1 M TEAP/DMF electrolyte solution. Also, exchange rate constant(K$\^$o/) was observed to 9.79$\times$10$\^$-11/ cm/s. The leaving time in air condition was found to affect the rancidity. We predicted that the product was carbonyl compounds.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.1
• /
• pp.431-438
• /
• 2021

To prepare more stringent regulations for USCG Phase II ballast water management, this study investigated the staining efficiency of SYBR Green I(SGI) and SYBR Gold(SG) on the virus-like particle (VLP). A dye with high staining efficiency was applied to the treated water that was passed through the ballast water treatment system (BWTS). VLP staining was observed most clearly under the 100-fold and 200-fold dilution of the stock solution when the volume of filtered samples was 0.5 mL to 2 mL. The staining efficiency of SGI and SG did not show a significant difference. On the other hand, the green fluorescence of viruses in the sample stained with SGI was more pronounced than in the samples stained with SG (expressed yellow fluorescence), making it easier to observe. The abundance of VLP in the test water and control water treatments that did not pass through the two types of BWTS (electrolysis type, UV + electrolysis type) was approximately 109 - 1010 VLP 100 mL-1. In contrast, no stained VLP was observed in the treated water treatments. Moreover, SGI was confirmed to be effectively stained under various salinity conditions, including seawater, brackish water, and freshwater. Further verification tests and development of staining methods under various BWTS are required, but the SGI staining method is believed to be a good alternative to the VLP live/dead determination of the USCG Phase II type approval test.

• Korean journal of applied entomology
• /
• v.61 no.4
• /
• pp.615-622
• /
• 2022

In this study, we sought to determine an appropriate LED light source that can be applied for the quality control of Aphidius colemani. Four LED light sources (385, 405, 450, and 660 nm) were evaluated in a Y-tube experiment (choice test) using a 5,000-k white LED as a control. The 385 nm LED light source was found to have attractant effect on A. colemani. In a no-choice test (Y-tube experiment) evaluating the remaining three LED light sources (385, 405, and 450 nm), the attractiveness of these light sources for A. colemani was high in the order 450 nm > 385 nm > 405 nm light, with no statistically significant differences between 450 nm and 385 nm. Given that 385 nm LED illumination may cause skin damage, we selected 450 nm LEDs for application in a device used for the quality control of A. colemani, which we subsequently demonstrated to have an attraction rate of 87.4%. We believe the findings of this study will make a valuable contribution to the quality control of natural enemies.

• Journal of Food Hygiene and Safety
• /
• v.39 no.2
• /
• pp.72-82
• /
• 2024

This study aimed to develop a scientifically and systematically standardized xylooligosaccharide analytical method that can be applied to products with various formulations. The analysis method was conducted using HPLC with Cadenza C₁₈ column, involving pre-column derivatization with 1-phenyl-3-methyl-5-pyrazoline (PMP) and UV detection at 254 nm. The xylooligosaccharide content was analyzed by converting xylooligosaccharide into xylose through acid hydrolysis. The pre-treated methods were compared and evaluated by varying sonication time, acid hydrolysis time, and concentration. Optimal equipment conditions were achieved with a mobile phase consisting of 20 mM potassium phosphate buffer (pH 6)-acetonitrile (78:22, v/v) through isocratic elution at a flow rate of 0.5 mL/min (254 nm). Furthermore, we validated the advanced standardized analysis method to support the suitability of the proposed analytical procedure such as specificity, linearity, detection limits (LOD), quantitative limits (LOQ), accuracy, and precision. The standardized analysis method is now in use for monitoring relevant health-functional food products available in the market. Our results have demonstrated that the standardized analysis method is expected to enhance the reliability of quality control for healthy functional foods containing xylooligosaccharide.

• Journal of Mushroom
• /
• v.11 no.2
• /
• pp.99-106
• /
• 2013

This study was initiated to investigate the skin whitening activities of methanol extracts from fruiting bodies of I. obliquus. The total polyphenols and flavonoids contents of I. obliquus methanol extracts were 31.85 mg/g and 28.33 mg/g, respectively. The methanol extract of the mushroom treated on B16/F10 melanoma and NIH3T3 cell lines did not show cytotoxic activity. 2,2-diphenyl-1-picrylhydrazyl(DPPH) free radical scavenging activity and chelating activity on ferrous ions of I. obliquus methanol extract were lower than those of positive control, tocopherol and BHT. The tyrosinase and L-DOPA inhibitory activities of the extract were lower than those of positive control, kojic acid and ascorbic acid. The tyrosinase and melanin synthesis inhibitory activities of the melanoma cells treated with the extract were comparable with positive control, arbutin. The experimental results suggested that methanol extract of I. obliquus contained inhibitory activities of tyrosinase and melanin synthesis in the B16/F10 melanoma cells by dose dependent manner. High ultra-violet absorption spectra in the range of 280-350 nm showed that I. obliquus extract could protect skin from UV radiation damage. Therefore, fruiting bodies of I. obliquus can be used for developing skin whitening, anti-UV and skin care agents.