• 대한화장품학회지
• /
• 제26권1호
• /
• pp.41-58
• /
• 2000

최근 환경오염으로 인한 지구오존층의 파괴로 자외선의 지표면의 도달 량이 증가하고 그로 인한 인간에 대한 피해가 증가하고 있다 . 과도한 자외선의 피부에 대한 직접적인 노출은 피부에 많은 문제점을 야기하므로 일차적으로 자외선차단제를 이용하여 인체에 대한 직접적인 피해를 최소화 해야한다 . 현재 자외선 차단제는 유기자외선흡수제와 무기자외선산란제가 많이 사용이 되는데 적은량으로도 효과가 높은 유기자외선차단제는 사용 시 주의를 요하므로 국가별로 사용량과 사용여부에 대하여 규제를 하고 있다. 본 연구에서는 플라보노이드류 ,알카로이드류 같은 자외선 흡수 성분을 함유한 식물중 UV/vis spectrophotometer 에서 자외선 흡수 peak을 나타내는 금은화 , 포공영, 녹차 , 황금추출물을 이용하여 화장품의 자외선 흡수제로서의 사용가능성여부를 조사하였다. 또한 식물추출물이 가진 자극성 성분과 오염성, 그들이 가진 유효성분들을 보호하고자 실리콘을 이용한 겔화를 시도하였다 . 자연친화적인 천연물로써 식물추출성분을 이용 유기자외선흡수제의 사용량을 줄이는 자외선홉수보조제로서 가능성을 보여주었다.

• 세라미스트
• /
• 제22권1호
• /
• pp.27-35
• /
• 2019

Research on ultraviolet (UV) light detection has attracted considerable attention from scientific researchers in related fields. It can be said that it is a very important time to accurately monitor the UV irradiation amount according to the wavelength region in real time. The oxide is very diverse in its kind and has the advantage of being able to efficiently control the band gap through band gap engineering. In addition, it is very stable in response to heat and atmospheric oxygen when UV is absorbed. Also, there is a known method that can effectively manufacture oxide nanoparticles and nanorods through various synthesis methods, and researches for improving the sensitivity of UV sensors have been carried out using this method. In this paper, we introduce the materials that can be used as UV sensors among various wide band oxide materials, and review the results of researches of various UV sensors using nano materials.

• 조명전기설비학회논문지
• /
• 제28권4호
• /
• pp.16-20
• /
• 2014

To prevent any accident in electric power utilities, many researches for inspection and diagnosis deteriorations occurring by corona discharges have been continuously studying. Inspection and diagnosis of electric power utility is very important to prevent an accident. This paper studies a measurement of ultra-violet(UV) ray of corona discharges on polymer insulators using an UV sensor array with an optic lens. The detection of an UV signal begins at 60kV, which is about 37.5% of the breakdown voltage of the polymer insulator and the stronger the high voltage increased to the polymer insulator was. It can be determined that the polymer insulator mounted on a live part must be examined when the discharge risk exceeds approximately 40%. In conclusion, the status of power utilities can be checked using an UV sensor.

• Journal of Advanced Marine Engineering and Technology
• /
• 제33권6호
• /
• pp.959-964
• /
• 2009

This paper dealt with the disinfection performance by Ultra-Violet Light Emitting Diode (UV LED) for a phytoplankton as a basic study for the development of a low-energy consumption ballast water treatment system. UV LEDs having peak wavelength of 255nm, 265nm and 280nm were used in the experiment. UV LED modules with driving circuit were fabricated, and optical and electrical characteristics of them were analyzed. The disinfection performance for phytoplankton depending on the UV wavelength was evaluated by comparing the number of phytoplankton before and after the UV treatments. The experimental result showed that the highest disinfection wavelength for the phytoplankton was 265nm.

• 조명전기설비학회논문지
• /
• 제25권5호
• /
• pp.98-103
• /
• 2011

Recently, UV(ultra-violet rays) camera has attracted a great deal of interest from the view point of easy judgement in inspections and diagnoses of the safety of power equipment. Especilly, UV camera is applied the inspection of UV with corona discharge. One of the most important and difficult problems is the basic research of filter design, materials and corona discharge. In this paper, we will report on the UV generation, corona pulse count and the polarity effect of positive and negative DC surface discharge in air. Also, corona discharge characteristics are analyzed using prototype UV camera of Korea. UV generation and corona pulse count due to surface discharge in positive needle is higher than that of negative needle.

• Journal of Advanced Marine Engineering and Technology
• /
• 제38권1호
• /
• pp.48-55
• /
• 2014

UV 발생용 플래시램프의 전원공급장치는 강력한 아크방전을 유발하기 위하여 높은 승압 비를 갖는 전압변환회로를 가지고 있다. 일반적인 구조는 높은 승압비의 트랜스포머와 배전압정류방식(코크라프트 올튼 회로 등)으로 방전관의 절연을 파괴함과 동시에 방전관에 전류를 급격히 통과시키는 방식으로 구동한다. 이 때, 제논방전관의 방전특성상 입력전류를 제한하지 않으면 방전관의 과다 발열, 전극손실, 봉입기체의 산화가속 등으로 수명저하의 원인이 되므로, 반드시 방전관에 유입되는 전류를 제한해야 되며, 이를 Ballast라 하는데 일반적으로 인덕터나 저항을 사용하여 인입전류량을 제한한다. 트랜스포머의 자가 공진(self-resonance)을 이용하면 낮은 1, 2차권선 비에도 고유주파수의 전후에서 비교적 높은 피크 전압을 얻을 수 있다. 또한 트랜스포머의 특정주파수에서 고유임피던스 성분을 이용하여 출력전압을 필터링하면 제논방전관이 자가 발진방식으로 동작하므로 종래의 회로구성보다 간단하고 경제적인 아크방전 파워 스테이지의 구성이 가능하다.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2007년도 7th International Meeting on Information Display 제7권2호
• /
• pp.1703-1705
• /
• 2007

Before the ultra-violet glue encapsulation, the research evaporated LiF thin film on device surface to be the extra packaging layer for improving the lifetime of organic light-emitting diode. The formula of UV glue was specially developed. We found 100 nm LiF is the optimum thickness. The best lifetime obtained by using LiF and special UV glue is 2.4 times longer than those by commercial UV glue.

• Journal of Welding and Joining
• /
• 제23권4호
• /
• pp.53-58
• /
• 2005

We designed a weld monitoring system with UV and IR sensors using a embedded DSP controller for implementing a distribution system; running stand alone and communication with outside by industrial standard protocols. Also this system provided a USB port in order to be acquiring data in PC. The user interface program in PC visualized the IR and W data in time, frequency and state space. A correlation of IR and UV signals showed closely related to weld quality. A rapid change of geometry can be found through a moving average filter. And the average value of IR signal at an interval represented a welding width and depth. Through these results, we proposed a monitoring algorithm for a integer type DSP.

• 조명전기설비학회논문지
• /
• 제26권5호
• /
• pp.91-96
• /
• 2012

The surface of bushing is contaminated with rain, dust, salt and others. A bushing with contaminations in air is serious problem in insulation. Therefore, it is important to understand the inspection and diagnoses of the safety. The ultra-violet rays(UV) camera has attracted interest from the view point of easy judgement. In this paper, we will report on the corona discharge characteristics of surface flashover model with contaminations in air. Also, UV images of discharge and corona pulse count in air are analyzed using prototype UV camera of Korea and a UV sensor with an optic lens. These results are studied at both AC and DC voltage under a non-uniform field.

• 한국식품영양과학회지
• /
• 제14권1호
• /
• pp.57-60
• /
• 1985

녹두 종자 발아억제물질을 생산하는 균을 동정한 결과 Streptomyces luteogriseus로 판정 되었으며, 본 저해물질의 순도검정을 위해 silica gel thin layer chromatography를 행한 결과 BuOH-HOAc-formic acid-water(15 : 12 : 3 : 10)와 BuOH-HOAc-water(4 : 1 : 5)의 용매게에서 각 Rf 치는 0.85와 0.92 의 단일 spot가 확인되었다. 또한 본 저해물질의 주요 radical을 조사해 본 결과 phenol기, pyrimidine 기, amono 기, 환원당 및 auxin은 함유되지 않았으며 단지 UV조사에 의해 형광을 나타내었다. 본 저해물질의 UV spectrum은 ${\gamma}^{H20}_{max}=252$ 였으며, IR spectrum 에서는 $3300{\sim}3500,\;2900{\sim}3000,\;1600{\sim}1700$ 및 $1400cm^{(-1)}$의 peak가 인정되었다.