• Elastomers and Composites
• /
• v.34 no.5
• /
• pp.399-406
• /
• 1999

Polyurethane (PU) prepolymers were synthesized from polytetramethylene ether glycol (PTMG), 4,4'-diphenylmethane diisocyanate (MDI), toluene 2,4-diisocyanate (TDI) and isophoron diisocyanate (IPDI). After chain extention using dimethyol propionic acid (DMPA), aqueous polyurethane anionomers were prepared from triethyl amine (TEA) as a neutralizer. The effect of the content of chain extender and the degree of neutralization on the state of emulsification, adhesive strength, viscosity, glass transition temperature and physical properties of emulsion cast film were investigated using UTM, Viscometer and DSC.

• Elastomers and Composites
• /
• v.33 no.3
• /
• pp.177-184
• /
• 1998

Polyurethane(PU) prepolymers were synthesized from polytetramethylene ether glycol(PTMG), with 4,4'-diphenylmethane diisocyanate(MDI), toluene 2,4-diisocyanate (TDI) and isophoron diisocyanate(IPDI). After chain extention using n-methyl-diethanol amine(n-MDEA), aqueous polyurethane cationomers were prepared by addition of glycolic acid(GA) as a quaternizer. The effect of the content of chain extender and the degree of neutralization on the stability of emulsion, adhesive strength, viscosity, glass transition temperature and physical properties of emulsion cast film were investigated using UTM, viscometer and DSC.

• Journal of the Korean Society of Safety
• /
• v.31 no.1
• /
• pp.66-73
• /
• 2016

Lyocell fibers were used as a precursor in order to improve yield and strength of cellulose-based precursor while manufacturing activated carbon fiber(ACF). Lyocell fibers as a precursor for the preparation of ACF were surface-modified by reaction with 3-aminopropyltriethoxysilane(APTES) and pre-treated with KOH and H3PO4. Using aforementioned precursor, ACFs were prepared by a series of stabilization, carbonization and activation process at high temperatures. On each process, FT-IR, TGA, UTM and SEM were used to observe fibers' physical properties including structure and porous surfaces. FT-IR results proved that surface modification was achieved during stabilization, carbonization and activation process. TGA results during carbonization process found that surface modified fibers with APTES 0.02 mol(A2) showed higher thermostability, and extended pre-treatment increased yield. Especially, yield was found to have an increase of 10~20 wt% with surface modification during activation process. UTM results showed that tensile strength has the same order of concentration of APTES after surface modification, however, was found to show lower tensile strength than lyocell fibers after stabilization process. SEM results revealed that more homogeneous porosity control could be proceed after modifying the surface for the effective removal of hazardous substances.

• International Journal of Railway
• /
• v.1 no.3
• /
• pp.113-116
• /
• 2008

The long-tenn exposure of polymeric composite materials to extreme-use environments, such as pressure, temperature, moisture, and load cycles, results in changes in the original properties of the material. In this study, the effect of combined environmental factors such as ultraviolet ray, high temperature and high moisture on mechanical and thermal analysis properties of glass fabric and phenolic composites are evaluated through a 2.5 KW accelerated environmental aging tester. The environmental factors such as temperature, moisture and ultraviolet ray applied of specimens. A xenon-arc lamp is utilized for ultraviolet light and exposure time of up to 3000 hours are applied. Several types of specimens - tensile, bending, and shear specimens that are warp direction and fill direction are used to investigate the effects of environmental factors on mechanical properties of the composites. Mechanical degradations for tensile, bending and shear properties are evaluated through a Universal Testing Machine (UTM). Also, storage shear modulus, loss shear modulus and tan a are measured as a function of exposure time through a Dynamic Mechanical Analyzer (DMA). From the experimental results, changes in material properties of glass fabric and phenolic composites are shown to be slightly degraded due to combined environmental effects.

• Clean Technology
• /
• v.12 no.1
• /
• pp.11-18
• /
• 2006

In this study, aqueous polyurethane dispersion(PUD) was synthesized using polyhexamethylene carbonate glycol (PHMCG) as soft segment, isophorone diisocyanate (IPDI) and dimethylol propionic acid (DMPA) as hard segment. Also, polyurethane/clay nanocomposites were prepared by adding pristine montmorillonite (PM) and organically modified clays, C15A and C30B into PUD. The degree of clay dispersion in the nanocomposites was investigated using XRD and the physical and thermal properties were examined through UTM and TGA. These results showed that nanocomposites with C15A gave higher physical and thermal properties than those with C30B or PM. As a result, the properties of nanocomposites were observed to vary depending on the types of clay modifiers and clay contents.

• Resources Recycling
• /
• v.19 no.2
• /
• pp.10-18
• /
• 2010

This research investigates the feasibility of ceramic specimens made from Primary clay and Red Hwangto with MSWI fly ash. Specimens preduced by mix-design maximum 20 wt% MSWI fly ash were analysed by SEM, UTM, ICP, etc. As a result of measurement,$P_{10}$ specimen was improved on bending strength and $R_5$ specimen was improved on compressive and bending strength. Also amount of extracted heavy metal was suitable for regulatory limits. This indicates that MSWI fly ash is indeed suitable for the partial replacement of ceramic materials in bricks.

• Parasites, Hosts and Diseases
• /
• v.46 no.2
• /
• pp.109-112
• /
• 2008

A parasitological investigation on trematode metacercariae was made on 62 freshwater fishes of 13 species in northern Thailand; Cyclocheilichthys apogon, Puntioplites proctozysron, Labiobarbus siamensis, Barbodes gonionotus, Barbodes altus, Henicorhynchus siamensis, Osteochilus hasselti, Notopterus notopterus, Mystacoleucus marginatus, Anabas testudineus, Systomus orphoides, Morulius chrysophykadian, and Hampala macrolepidota. The fish were caught over the summer period (February-May 2007) from 2 Chiang Mai water reservoirs, i.e., the Mae Ngad (UTM 47Q E 503200, 47Q N 2119300) and the Mae Kuang Udomtara (UTM 47Q E 513000, 47Q N 2092600) Reservoirs in Chiang Mai province, Thailand. The prevalence of heterophyid (Haplorchis taichui and Haplorchoides sp.) metacercariae in these fish was 83.9% and 74.2% in the Mae Ngad and Mae Kuang Udomtara Reservoirs, respectively. The highest intensity of heterophyid metacercariae in H. siamensis in the Mae Ngad was 120.4 and that in P. proctozysron in the Mae Kuang Udomtara was 180.0. The fish, A. testudineus, C. apogon, and M. chrysophykadian, were not found to be infected with H. taichui metacercariae. The results show that the freshwater fish in Chiang Mai water reservoirs are heavily infected with H. taichui and Haplorchoides sp. metacercariae.

• Environmental Engineering Research
• /
• v.11 no.5
• /
• pp.257-265
• /
• 2006

The purpose of research is to mix the fly ash from municipal solid waste incinerator in the recycled Polypropylene and to recycle. The specimen was produced by mixing 20 wt.% of MSWI fly ash at maximum in the recycled Polypropylene and the particle size analyzer, DSC, TGA, SEM and UTM instruments were used to analyze the physical chemical properties of the specimen. As a result of measurement, the average particle size of MSWI fly ash was $18.08\;{\mu}m$. In TGA analysis, the temperature of specimen S-5 at 50% of weight decrease was risen by $7^{\circ}C$ higher than specimen S-1. In UTM measurement, specimen S-2 showed the maximum strength for tensile strength and specimen S-3 showed the maximum strength for flexural strength. But, impact strength was decreased according to the increasing proportion of MSWI fly ash. In conclusion, when the proper amount of MSWI fly ash was added to the recycled Polypropylene, thermal endurance, tensile strength and flexural strength could be increased, but impact strength was decreased.

• The Journal of the Acoustical Society of Korea
• /
• v.10 no.3
• /
• pp.13-18
• /
• 1991

In this study, the analysis technique of fracture stress using the reflection coefficient of SAW reflected from a brittle solid with surface crack has been studied. Fracture stress of brittle solid with surface crack has been obtained by the function of the critical stress intensity factor and the maximum normalized stress intensity factor of the crack in the body. And the maximum normalized stress intensity factor of a surface crack can be inferred from a measurement of reflection coefficient of SAW. In experiment, the surface cracks ranging from 0.5mm to 0.9mm in crack depth has been made at the center of each Pyrex disc, and the SAW wedge transducer has been set up for the pitch-catch mode. It has been compared the theoretical values of the fracture stress calculated from the reflection coefficient of SAW with the values of the fracture stress measured from UTM.

• Polymer(Korea)
• /
• v.31 no.5
• /
• pp.379-384
• /
• 2007

The nanocomposites with inorganic nano powder, improved thermal stability, were prepared by urethane polymerization. The structure and surface properties of the nanocomposites were determined by X-ray diffraction and FT-IR, respectively. The thermal stabilities were studied using TGA and DSC. Their morphologies and mechanical properties were observed by SEM and UTM. As a result, the nanocomposites with MMT led to the increase of the silicate layers. The distance between layers of the nanacomposites with MMT was increased by $7.5{\AA}$ and the new peaks at $1038cm^{-1}$ were shown in the presence of the Si-O groups on the silica. The thermal stabilities of the nanocomposites were higher than those of pore polyurethane matrix. The nanocomposites had higher in mechanical properties than the pure polyurethane matrix.