• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 1998.10a
• /
• pp.123-128
• /
• 1998

This paper proposes design of LFT-based fuzzy controllers for model-following, which are better than the previous input-output linearization controllers, which are not able to follow the model system states and which do not guarantee the stability of all states. The method proposed in this paper provides a LFT-based Takagi-Sugeno(T-S) fuzzy controller with guaranteed stability and model-following via the following steps: First, using LFT(Linear Fractional Transformation) and T-S fuzzy model, controllers, are obtained. Next, error dynamics are obtained for model-following, and errors go to 0(zero). Finally, a T-s fuzzy controller that can stabilizxe the system with the requirement on the control input satisfied is obtained by solving the LMIs with the MATLAB LMI Control Toolbox and a model-following controller is obtained. Simulations are performed for the LFT-based T-S fuzzy controller designed by the proposed method, which show better performance than the results of input-out ut linearization controller.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.12C
• /
• pp.1068-1074
• /
• 2008

In this paper, we propose the algorithm for generating the array of elemental image by using look-up table (L UT) in a computer generated integral imaging system. It makes the LUT independently for the projection point of x and y. The algorithm using LUT to the existing ones needs less computing time to generate the array of elemental image. By comparing the computing time of proposed algorithm with that of the existing algorithms e xperimently, we proved the efficiency of proposed algorithm.

• The Journal of the Korean dental association
• /
• v.14 no.5
• /
• pp.457-459
• /
• 1976

The author experienced a failed ase of root resection which qas performed on the abnormal upper right lateral incisor. The patient was 16year old female. Clinically the effected tooth had neither a carious cavity nor periondontal diseases, ut, a fistula was present on the gum tissue near the root apex. The roentogenogram revealed a pathological area around the apex of the tooth. The results of failed apicoectomy lead to following conclusions. 1. The operated tooth was a case of dense invaginatus which had two pulp cavities and two canals seperated along their entire length. 2. It was the main cause of failure that the second pulp cavity and root canal were not obturated.

• Journal of Scientific & Technological Knowledge Infrastructure
• /
• s.20
• /
• pp.17-19
• /
• 2005

본격적인 국제 사이버 과학기술 R&D 시대를 열어 줄 국제과학기술협업연구망 글로리아드(GLORIAD) 개통을 기념해, 우리 연구원은 지난 9월 5일부터 6일까지 이틀 간 서울롯데호텔(소공동 소재)에서 세계적인 과학기술계 석학들과 함께 '글로벌 첨단 과학기술협업연구망의 발전방안 모색'이라는 주제로 국제 심포지움을 개최했다. 그 첫날인 9월 5일 우리 연구원은 전자신문사와 공동으로 글로리아드 개통의 의의와 앞으로의 발전방향을 진단해 보는 좌담회를 열었다. 좌담회는 우리 연구원 이지수 슈퍼컴퓨팅센터장의 사회로, 미국 글로리아드 사업책임자인 오크릿지 국립연구소(UT-ORNL) 그렉 콜(Greg Cole) 박사, KAIST 전자전산학과 전길남 교수, 세계 핵융합에너지(ITER) 연구의 최고 권위자인 러시아 쿠르차토프연구소(RRC" Kurchatov Institute) 벨리코프(Evegany Velikhov) 소장, 중국 글로리아드 사업 책임자인 중국 전산망정보센터 얀 바오핑(Baopin Yan)센터장, 세계적인 네트워킹 기업 VSNL의 디렉터 빅토르 헤다드(Victor Haddard)가 참가했다.

• Archives of design research
• /
• v.12 no.4
• /
• pp.15-22
• /
• 1999

The research on applying typographic medium to typography has been active, and the results have been Used on designs. ut method of applying editing design in imaginary space in the Web environment to typographic medium has been used in actual life instead of editing design for print outs. In this treatise, we will look into appropriate method to apply typography under the Web environment through research , and limitation of applying typography as a method to apply typography into the Web environment appropriately, and discuss the alternative for it.

• Journal of the Korean Society of Safety
• /
• v.19 no.1
• /
• pp.6-11
• /
• 2004

CNG buses were introduced in 2002 to reduce air pollution to the big cities. The durability and safety evaluation were performed for the NGV-2 type cylinders taken from two buses after 30 months of running. No external damage and no internal corrosion was observed on the container surfaces. Defect exceeding the allowable limit was not found in the UT test. Permanent volume expansion was about 1.2% which is much smaller than the required design limit. Cycling test showed no failure after 11,250cycles and burst pressures were still above the maximum design pressure. Both the longitudinal and circumferential failure mode were observed, where both the fracture strengths were far above the design limit. This study showed the present CNG fuel cylinders were safe enough for further usage.

• Proceedings of the KSPS conference
• /
• 2003.05a
• /
• pp.159-162
• /
• 2003

In this paper I investigate the intervening consonants constraint in umlaut in Korean. It is generally known that if a palatalized consonant, i.e. s/ㅅ/ or $t{\int}/ㅈ/$ etc, intervenes in an umlaut environment, the expected umlaut process is blocked. But there are not a few words which are thought to have undergone umlaut diachronically: wensu $( If we assume that these words were formed as a result of umlaut, we must explain the reason of the violation of the intervening consonants constraint. On the other hand if we assume that these words were formed as a result of other phonological processes, we must explain these words by ad hoc rules respectively. In this paper I argue that these words including others have undergone the umlaut process by offering some historical and dialectal evidence.

• Korean Journal of Materials Research
• /
• v.9 no.6
• /
• pp.604-608
• /
• 1999

Semiconductor industry requires the development of new technology such as 300 mm technology, suitable for manufacturing the next generation dervices. A promising process for realizing 300 mm technology can be achieved by using enlarged microwave plasma chemical vapor deposition (MWCVD) technology. In this work, we used radial line slot antenna for enlarging microwave plasma area, and carried ut the deposition of polysilicon films using enlarged MWCVD for the first time in Korea. The results was as follows. Deposited polysilicon films showed various degrees of crystallinity as well as epitaxy to silicon substrates even at low temperature of $300^{\circ}C$. Deposition rates also controled crystallization behavior and slo deposition rates showed very high crystallinity. It could be said that enlarged MWCVD system and technology was worth to get attraction as one os future technologies for 1 G DRAM era.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.12 no.3
• /
• pp.33-39
• /
• 1992

This paper presents a summary of the immersion ultrasonic test to analyze the quality of diffusion bonding parts. The most important property of diffusion bonding parts is bonding strength, and that can be obtained by shear test. By comparing among data obtained by ultrasonic test(C-Scan) and those by shear test (bonding strength), these data are shown to be in good relation. Therefore ultrasonic C-Scan test result can be used successfully in quantitative quality control for diffusion bonded parts.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.23 no.3
• /
• pp.270-279
• /
• 2003

Parametric studies have been conducted into the variability of the factors affecting the ultrasonic testing applied to weldments. The influence of ultrasonic equipment, transducer parameters, test technique, job parameters, defect type and characteristics on reliability far defect detection and sizing was investigated by experimentation. The investigation was able to build up substantial bank of information on the reliability of manual ultrasonic method for testing weldments. The major findings of the study separate into two parts, one dealing with correlation between ultrasonic techniques, equipment and defect parameters and inspection performance effectiveness and other with human factors. Defect detection abilities are dependent on the training, experience and proficiency of the UT operators, the equipment used, the effectiveness of procedures and techniques.