• 한국화재소방학회:학술대회논문집
• /
• 한국화재소방학회 2011년도 추계학술논문발표회 논문집
• /
• pp.282-285
• /
• 2011

클라우드 컴퓨팅에 있어서 이질적 컴퓨팅 자원들을 소프트웨어에 의해 논리적 방법으로 제어할 수 있도록 하는 가상화와 대용량 데이터의 분산병렬처리가 핵심적인 기술이다. 재난의 예방 및 대응을 위해 다양한 센서들이 개발되고 있으며, 재난관리 어플리케이션들은 센서들에 의해 획득된 대용량의 데이터를 상호 관련성에 따라 신속하게 처리할 것이 요구된다. 이 논문에서는 클라우드 컴퓨팅을 이용한 재난관리시스템 구축을 위해 다양한 이질적 센서들을 가상화하여 센서 클라우드 환경을 구성하는 방안을 제시한다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 춘계학술대회 논문집
• /
• pp.536-539
• /
• 2002

The reverse engineering (RE) technology can quickly generate 3D point cloud data of an object by capturing the surface of a model using a 3D scanner. In the rapid prototyping (RP) technology, prototypes are rapidly produced from 3D CAD models in a layer-by-layer additive basis. In this paper, a physical human head shape is duplicated using a new RP process, the Transfer-type Variable Lamination Manufacturing process using expandable polystyrene foam sheet (VLM-ST), after the point cloud data of a human head shape measured from 3D SNX scanner are converted to STL file. From the duplicated human head shape, it has been shown that the VLM-ST process in connection with the 3D scanner is a fast and efficient process in that shapes with free surface, such as the human head shape, can be duplicated with ease. Considering the measurement time and the shape duplication time, the use of 3D SNX scanner and the VLM-ST process is expected to reduce the lead-time fur the development of new products in comparison with the other existing RE-RP connected manufacturing systems.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2004년도 제28회 KOSCO SYMPOSIUM 논문집
• /
• pp.21-26
• /
• 2004

Characteristics of laminar lifted names in coflow jet with various coflow velocities have been studied experimently. USlI1g the fuel nozzle with d=0.254 for the pure propane, liftoff heights are fitted by using power equation with jet velocity. As coflow velocity increases up to 60 cm/s powers of fitting equation steeply decrease. From the result of numerical analysis using the FLUENT, the stoichiometry contour and the axial velocity nondimensionalized by initial jet velocity along the stoichiometry contour are changed with variations of coflow velocities, The change of axial velocity along stoichiometric contour is more sensitive than that of stoichiometric contour, For this reason, powers of fitting equation for liftoff height with jet velocity decreases with the increase of coflow velocity. Using the fuel nozzle with d=4,35 mm for the highly diluted propane by nitrogen, the liftoff height increases with the increase of coflow velocity when coflow velocity is less than the maximum value of initial jet velocity. But when coflow velocity is faster than that, the liftoff height decreases with the increase of coflow velocity.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 추계학술대회논문집A
• /
• pp.760-765
• /
• 2001

A new rapid prototyping process, as a transfer type of Variable Lamination Manufacturing by using expandable polystyrene foam (VLM-ST), has been developed to reduce building time, apparatus cost including the introduction and the maintenance and additional post-processing. The objective of this study is to propose a VLM-ST process and to develop an apparatus for implementation of the process. Design criteria of the apparatus were defined and the techniques were proposed to satisfy the design criterion. In order to examine the efficiency and applicability of the developed process, various three-dimensional shapes, such as a world-cup logo, a knob shape and a character, Son-o-kong, were fabricated on the apparatus in which unit shape layer (USL) was generated to build up each layer.

• 한국기계가공학회지
• /
• 제6권3호
• /
• pp.85-91
• /
• 2007

This study was carried out to minimize the lifting force of a two hinge type stand mechanism. This unit is designed for the display devices in order to enhance the ergonomics for effective height adjustment and maintenance at any preferred position. The unit will be very useful for the mechanism fabricated with a coil spring and disc springs as a torque generator. The maximum and the minimum torque value should be calculated initially for the smooth lift. And the reasonable torque distribution is necessary to prevent any auto lift and auto dropping at any position because the torque generated by coil spring is more sensitive than disc spring in tilting the position. Therefore, the analysis of the coil spring is requisite to issue the specific torque value depending on the distorted angle with securing reliability of a long time storage condition. After the theoretical torque value was calculated, the evaluation was carried out by making a proto-type sample, then distorted angle was updated by experiment. The result of this study can readily be applied to various units for the optimization of the smooth lift.

• 한국공작기계학회논문집
• /
• 제16권1호
• /
• pp.92-97
• /
• 2007

This study was carried out to minimize the lifting force and to design the slim sized frame of a height adjustment mechanism. This unit is designed for the display devices in order to enhance the ergonomics for effective height adjustment as well as to achieve much slimmer frame for the pedestal. A tolerance analysis of 6 sigma was applied to achieve smooth lift at design stage not to change the tolerance specification of gap several times in a roller type of lifting mechanism at mass production stage. The specification of minimum gap and the target of production yield ratio were agreed with a quality team before tooling. A DFSS simulation on drawings had been done with reasonable tolerance and achievable standard deviation(${\sigma}$) several times until the target specification of gap and yield ratio was met. Once tolerance and deviation(${\sigma}$) were fixed tooling start was done successfully. A CAE method was applied to achieve a slim design. Design parameters were frozen when those parameters matched the reference strength data of standard model. Through those tolerance analysis and CAE simulation the number of tool modification was reduced and production yield ratio was raised up without arguing quality specification at production stage in the end.

• 한국전문물리치료학회지
• /
• 제17권2호
• /
• pp.43-50
• /
• 2010

The purpose of this study was to investigate the effects of Evjenth-Hamberg stretching on the active range of motion (ROM) of the hip joint and the pennation angle of the semitendinosus muscle. Eighty healthy adults participated in this study. The active ROM of the hip joint was measured by a goniometer and the pennation angle of the semitendinosus muscle was measured by ultrasonographic imaging (USI). Both ROM and pennation angle were recorded before and after the static stretching and the Evjenth-Hamberg stretching, respectively. Data were analyzed using paired t-lest and independent t-test at p<.05. The results were as follows: 1) The active ROM of the hip joint increased significantly after both stretching interventions compared with the baseline (p<.001). However, the active ROM of the hip joint increased significantly in Evjenth-Hamberg stretching compared with static stretching. 2) The pennation angle decreased significantly after both stretching interventions compared with the baseline (p<.001). However, the pennation angle decreased significantly in Evjenth-Hamberg stretching compared with static stretching. 3) Reliability data showed that there was a high consistency in USl measurements (ICC=.978). Our findings suggest that the Evjenth-Hamberg stretching was more effective than static stretching in increasing the active ROM of the hip joint and decreasing the pennation angle of the semitendinosus muscle.

• 대한안전경영과학회지
• /
• 제12권3호
• /
• pp.257-262
• /
• 2010

The study investigates the various Acceptance Control Charts (ACCs) based on the factors that include process independence, data weighting scheme, subgrouping, and use of control charts. USL - LSL > $6{\sigma}$ that used in the good condition processes in the ACCs are designed by considering user's perspective, producer's perspective and both perspectives. ACCs developed from the research is efficiently applied by using the simple control limit unified with APL (Acceptable Process Level), RLP (Rejectable Process Level), Type I Error $\alpha$, and Type II Error $\beta$. Sampling interval of subgroup examines i.i.d. (Identically and Independent Distributed) or auto-correlated processes. Three types of weight schemes according to the reliability of data include Shewhart, Moving Average(MA) and Exponentially Weighted Moving Average (EWMA) which are considered when designing ACCs. Two types of control charts by the purpose of improvement are also presented. Overall, $\alpha$, $\beta$ and APL for nonconforming proportion and RPL of claim proportion can be designed by practioners who emphasize productivity and claim defense cost.

• 한국정밀공학회지
• /
• 제19권2호
• /
• pp.95-105
• /
• 2002

In order to reduce the lead-time and cost, the technology of rapid prototyping (RP) has been widely used. However, RP technologies have disadvantageous characteristics according to their working principle: low building speed, high cost for introduction and maintenance of RP apparatus, stair-stepped surface and additional post processing. A new rapid prototyping process, as a transfer type of Variable Lamination Manufacturing by using expandable polystyrene room (VLM-ST), has been developed to reduce building lime. apparatus cost including the introduction and the maintenance and additional post-processing. The objective of this study is to propose a VLM-ST process and to develop an apparatus for implementation of the process. Design criteria of the apparatus are defined and the techniques arc proposed to satisfy the design criterion. In order to examine the efficiency and applicability of the developed process, various three-dimensional shapes, such as a world-cup logo. a knob shape, an extruded cross, a twisted shape, a character, Son-o-kong. a helical gear shaped and a scissor shape are fabricated on the apparatus in which unit shape layer (USL) was generated to build up each layer.

• 자원리싸이클링
• /
• 제5권1호
• /
• pp.21-28
• /
• 1996

최근 폐기물에 의한 환경오염이 큰 사회적인 문제로 대두되고 있으며, 특히 산업체에서 발생되는 폐기물에 큰 관심이 주어지고 있다. 본 연구에서는 주물업계에서 발생하는 폐주물사를 재활용하기 위한 효율적인 재생방법 및 주물에 미치는 영향을 조사하기 위해, 최근에 많이 사용하게 되어 다량으로 발생하는 폐자경성 후란주물사의 재생에 대해 연구하였다. 현재 산업체에서 사용하고 있는 기계적 방법 및 뉴매틱 방법의 여러 가지 단점들을 개선하기 위하여, 연소방법 중 가장 효과적인 유동층에서 후란 주물사를 연소법으로 재생하였다. 후란점결제와 경화제 등을 완전 연소시키기 위해서는 유동층의 온도가 약 $650~700^{\circ}C$의 범위가 적절하였다. 주형을 제작하였을 때, 연소법에 의한 재생사가 뉴매틱법에 의한 것보다 표면 안정도와 강도가 각각 4% 및 7.2%로 크게 나타났다. 또한, 연소법의 순수 재생에너지 비용을 산출하면 주물사 톤당 약 1만원으로, 신사 구입의 비용인 약 5만원에 비하면 매우 저렴해서 산업화가 되면 주물사의 구입비가 절약되고, 매립에 의한 환경오염 문제들을 해소할 수 있다. 따라서 효과적인 폐자원의 리싸이클링으로 최근 침체되어 가는 주물업계의 국제 경쟁력 제고와 청정기술의 산업화를 할 수 있는 자료들을 얻을 수 있었다.