• Journal of Ocean Engineering and Technology
• /
• v.25 no.6
• /
• pp.86-90
• /
• 2011

The mining of imitated manganese noodles in 1000 m of seawater is planned for 2012. Thus, it is necessary to prepare the lifting pipes to be used for the test. Because of storage and expense constraints, flexible and economic HDPE pipe is being considered, making it necessary to test the structural safety. Material, pressure-chamber tests and finite element analysis of HDPE pipe for the 1000-m depth were performed. The tangential stiffness of HDPE was obtained through tension and three-point bending material tests and used for a structural analysis. FEA results show that the current sample pipe segment is safe for 1000 m of water pressure, and the stress result is also within the safe value. From the current results, the HDPE pipe seems to be acceptable only for the currently suggested constraints. However, more numerical and pressure tests need to be considered by applying additional physical conditions such as gravitational and hydrodynamic loads, external and internal fluid pressure, axial force induced ship motion, and heavy pump pressure to determine future usage.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.17 no.4
• /
• pp.150-159
• /
• 2018

The present research deals with a finite element analysis and fatigue evaluation of a steam separator of a high-pressure evaporator for the Heat Recovery Steam Generator (HRSG). The fatigue during the expected life of the HRSG was evaluated according to the ASME Boiler and Pressure Vessel Code Section VIII Division 2 (ASME Code). First, based on the eight transient operating conditions prescribed for the HRSG, temperature distribution of the steam separator was analyzed by a transient thermal analysis. Results of the thermal analysis were used as a thermal load for the structural analysis and used to determine the mean cycle temperature. Next, a structural analysis for the transient conditions was carried out with the thermal load, steam pressure, and nozzle load. The maximum stress location was found to be the riser nozzle bore, and hence fatigue was evaluated at that location, as per ASME Code. As a result, the cumulative usage factor was calculated as 0.00072 (much less than 1). In conclusion, the steam separator was found to be safe from fatigue failure during the expected life.

• Journal of Institute of Control, Robotics and Systems
• /
• v.17 no.3
• /
• pp.223-228
• /
• 2011

In this paper, we proposed a technique to recognize three states in stance phase of gait cycle. Walking assistive devices are used to help the elderly people walk or to monitor walking behavior of the disabled persons. For the effective assistance, they adopt an intelligent sensor system to understand user's current state in walking. There are three states in stance phase; Loading Response, Midstance, and Terminal Stance. We developed a foot pressure sensor using 24 FSRs (Force Sensing/Sensitive Resistors). The foot pressure patterns were integrated through the interpolation of FSR cell array. The pressure patterns were processed to get the trajectories of COM (Center of Mass). Using the trajectories of COM of foot pressure, we can recognize the three states of stance phase. The experimental results show the effective recognition of stance phase and the possibility of usage on the walking assistive device for better control and/or foot pressure monitoring.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.11 no.3
• /
• pp.159-177
• /
• 2015

As smart phones become more common nowadays, mobile instant messengers such as kakao talk and line are used as essential communication tools exchanging information between individuals. Also, the mobile instant messengers extend their use to business area beyond communication between individuals. This study is on how factors of mobile instant messenger such as perceived security, perceived privacy, perceived enjoyment and perceived interactivity affect business continual usage intention through perceived usefulness. The proposed model is based on Expectation-Confirmation Theory of Oliver and Technology Acceptance Mode of Bhattacherjee. For an analysis, 159 survey responses were collected from the office workers in Seoul and nearby cities, having experiences of mobile instant messengers. To validate the proposed research model, PLS analysis is performed with the valid 154 questionnaires. The path analysis results are as follows. First, perceived security has a positive effect on expectation-confirmation. Second, perceived enjoyment has a positive effect on perceived usefulness. Third, perceived interactivity has a positive effect on both perceived usefulness and expectation-confirmation. Fourth, perceived usefulness has a positive usefulness on satisfaction and continual usage intention of mobile instant messenger. Last, expectation-confirmation has a positive effect on perceived usefulness, and satisfaction has a positive effect on continual usage intention of mobile instant messenger. Since the mobile instant messenger may bring a pressure of work and a violation of privacy, it is necessary that the company provide a guideline for use of the mobile instant messenger and establish the in-house mobile instant messenger system.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2007.05a
• /
• pp.38-41
• /
• 2007

The increase of $CO_2$ emission by increasing of fossil fuel usage has been understood a major cause of global warming. The supply of electric energy is heavily dependent on the massive thermal power and nuclear power plant before developing the renewable energy to supply the electric energy stably at a low price. The large and sound forged components of pressure vessel, turbine and generator are widely used in power plant such as wind power, hydroelectric power generation, nuclear power and thermal power plant. This paper is discussed the trend of manufacturing technology for pressure vessel and turbine to satisfy the required condition of utility company. It is also introduced a strategy of forging industry to cope with carbon tax.

• Proceedings of the KIEE Conference
• /
• 2005.05a
• /
• pp.42-44
• /
• 2005

Many cellular phone volunteer studies have been conducted since such a social issue is raised that the long time usage of cellular phone may increase health risk. While there were various volunteer studies using GSM cellular phone on heart rate and blood pressure at abroad, very few studies using CDMA phone were conducted in domestic and abroad. In this study, the volunteer groups of 21 adults were exposed at 300 mW for half an hour, and the physiological parameters such as blood pressure, heart rate, respiration rate, and skin impedance were measured. All the parameters' results did not reveal any differences between exposure and non-exposure conditions in adults.

• Transactions of the Korean Society of Pressure Vessels and Piping
• /
• v.5 no.1
• /
• pp.25-31
• /
• 2009

Steam Generator(SG) tube is an important component of Nuclear Power Plant(NPP), which comprises of the pressure boundary of primary system. The integrity of SG tube has been confirmed by the eddy current test every outage. In Korea, Bobbin probe and MRPC probe have been generally used for the eddy current test. Meanwhile the usage of Array probe has gradually increased in U.S., Japan and other countries. In this study, we investigated the defect detection capability of the Array probe through its preliminary application to SG tube inspection. The Array probe has the equivalent capability in the defect detection and sizing as the conventional methods. Thus it is desirable that the Array probe is generally applied to SG tube inspection in the domestic NPPs.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.26 no.11
• /
• pp.1521-1530
• /
• 2002

This article proposes a pressure based method for predicting flows at all speeds. The compressible SIMPLE algorithm is extended to unstructured grid framework. Convection terms are discretized using second-order scheme with deferred correction approach. Diffusion term discretization is based on structured grid analogy that can be easily adopted to hybrid unstructured grid solver. This method also uses node centered scheme with edge based data structure for memory and computing time efficiency of arbitrary grid types. Both incompressible and compressible benchmark problems are solved using the above methodology. The demonstration of this method is extended to slip flow problem that has low Reynolds number but compressibility effect. It is shown that the proposed method can improve efficiency in memory usage and computing time without losing any accuracy.

• Proceedings of the Korean Reliability Society Conference
• /
• 2011.06a
• /
• pp.281-288
• /
• 2011

Hydraulic hose assemblies deliver a fluid power in various oil pressure equipments such as construction machinery, automobile, aircraft, industrial machinery, machine tools, and machinery for ships, or they are used as pipes in oil pressure circuit. However, as the traditional measure for estimating life under the influence of various external factors incurs hardship in terms of time and expenses, it is essential to take accelerated life test by choosing the factor that suits the usage condition of the test object. The objective of the this study is to propose a acceleration model that takes both temperature and pressure without flexing condition into consideration. The life that is calculated by the equation for evaluating life and the test data show similar slopes as a result of comparing and analyzing the equation for evaluating life that is obtained in this research and the test data, which illustrates that they estimate life similarly, and the proposed equation is proved to be an accelerated life equation that presents the test results.

• Journal of Institute of Control, Robotics and Systems
• /
• v.13 no.8
• /
• pp.777-782
• /
• 2007

Human Robot Interaction(HRI) through a haptic interface plays an important role in controlling robot systems remotely. The augmented usage of bio-signals in the haptic interface is an emerging research area. To consider operator's state in HRI, we used bio-signals such as ECG and blood pressure in our proposed force reflection interface. The variation of operator's state is checked from the information processing of bio-signals. The statistical standard variation in the R-R intervals and blood pressure were used to adaptively adjust force reflection which is generated from environmental condition. To change the pattern of force reflection according to the state of the human operator is our main idea. A set of experiments show the promising results on our concepts of human adaptive interface.