• Journal of the Korean Association of Geographic Information Studies
• /
• v.14 no.4
• /
• pp.1-12
• /
• 2011

There has been the increasing concern with the safety of seven major urban infrastructure such as road, electricity, water supply, sewerage and so on due to urban expansion and new town development. However, high technology development for the common duct which can be an alternative for the safety issue has not been completed due to the law of the national security area. Existing management method of the common duct by people could not respond to the urgent accidents adequately and immediately since it is impossible for us to get access to that in case of fire or gas leak. This study suggests to the method of installing monitoring devices and processing CCTV images with a water supply in a TestLab(a variety of the USN(Ubiquitous Sensor Network) equipment was tested in the TestLab in KICT). The suggested management method of common duct facilities make it possible to do real-time monitoring and prompt access and response to an accident inside the common duct.

• Journal of the East Asian Society of Dietary Life
• /
• v.17 no.4
• /
• pp.571-579
• /
• 2007

The aim of this study was to predict the development process of the Korean food service industry by forecasting the per capita GDP. Forecasting the GDP, involved two primary approaches. One was related to looking at the Korean food service industry's situation by per capita GDP and comparing it to that of the US and Japan. The other was to predict food service industry projections in Korea by quantitative forecasting models. Holt's simple exponential smoothing method and new types of the series models(Damped trend exponential smoothing method), were employed to predict the per capita GDP. The accuracy of the models was measured by MAPE. The empirical results of the forecasting models indicate that the three time series models performed fairly well. Of these Damped trend Damped trend exponential smoothing performed best with the lowest MAPE(9.9%). The results show that the time for reaching a per capita GDP level of $20,000 was 2008 with the Damped trend model and 2009 with the Holt model. Moreover, we found that a per capita GDP level of $30,000 will be achieved in 2012 from the Damped trend model and in 2013 from the Holt model. Within this study, the implications for the Korean food service industry are further discussed. It was predicted there will be a stabilization period in 2008 or 2009 in Korea with achievement of a per capita GDP of $20,000. At this time, major food service industry companies will need to invest in equipment toy external growth and there will be industry trends toward ethnic food and theme restaurants. Also, if a per capita GDP of $30,000 is achieved by 2012 or 2013, the Korean food industry will need to be highly responsive. Therefore, food industry companies should forecast and study customer values and prepare for changes.

• Journal of Food Hygiene and Safety
• /
• v.33 no.1
• /
• pp.12-22
• /
• 2018

The US government has enacted the Food Safety Modernization Act (FSMA) in 2011, which is being phased in and planned. The final Rules of Produce Safety focus on biological hazards related to agricultural production, harvesting, packaging and storage, which are being phased in since 2017 depending on farm scale. As a result of comparison with the Korean-GAP (Good Agricultural Practices) standards, it is difficult to compare the two standards to be compared with each other by 1:1. However, many of the Korean-GAP standards are similar to FSMA Produce Safety rules. However, the Korean-GAP standards can be judged differently according to the evaluator as a comprehensive standard, so the details of the standards need to be reinforced. In terms of the provisions, the Korean-GAP standards are the most appropriate for the safety of workers (FSMA Subpart D), followed by livestock and wild animals (FSMA Subpart I), buildings, equipment and tools (FSMA Subpart L) and harvesting activities (FSMA Sub-part K). However, there are some weaknesses in the field of agricultural water management (FSMA Subpart E) and farm manager's qualifications and training (FSMA Subpart C), and the response to the biological soil amendments of animal origin and human waste (FSMA Subpart F) is weak. The FSMA regulation is not a certification standard, but it is expected that the marbling effect, which is the standard laid down by the United States leading the world food safety standards, is expected to be considerable. Therefore, we hope that the review of the Korean-GAP standards will help improve the quality of agricultural products and expand our exports, since the standard for responding to microbiological safety emphasized in the FSMA regulations is the Korean-GAP standard.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.27 no.4
• /
• pp.321-329
• /
• 2001

To establish systematic diagnosis and treatment planning of dentofacial deformity patient including facial asymmetry or hemifacial microsomia patient, comprehensive analysis of three dimensional structure of the craniofacial skeleton is needed. Even though three dimensional CT has been developed, landmark identification of the CT is still questionable. In recent, a method for correcting cephalic malpositioning that enables accurate superimposition of the landmarks in different stages without using any additional equipment was developed. It became possible to compare the three-dimensional positional change of the maxillomandible without invasive procedure. Based on the principle of the method, a new program was developed for the purpose of diagnosis and treatment planning of dentofacial deformity patient via three dimensional visualization and structural analysis. This program enables us to perform following menu. First, visualization of three dimensional structure of the craniofacial skeleton with wire frame model which was made from the landmarks observed on both lateral and frontal cephalogram. Second, establishment of midsagittal plane of the face three dimensionally, with the concept of "the plane of the best-fit". Third, examination of the degree of deviation and direction of deformity of structure to the reference plane for the purpose of establishing surgical planning. Fourth, simulation of expected postoperative result by various image operation such as mirroring, overlapping.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.8
• /
• pp.115-122
• /
• 2020

This study aimed to improve the reliability of the assurance pressure of a gun barrel due to the difference between the US Standard and Korean Standard. In addition, the reliability was found to differ according to the maximum pressure of the Ammunition, so restrictions are expected. During the development of the new bullet, the maximum pressure of the bullet was approximately 3,000 psi higher than the assurance pressure of the gun barrel. To solve this problem, the reliability of the cannon was analyzed when the assurance pressure of the gun barrel increased. First of all, the technical data from overseas were reviewed to check for cases of increased assurance pressure, and tests were performed to determine if it could withstand high pressure through a verification firing test. Finally, the simulation analyzed the stability of the recoil buffer. The study found no abnormal results in all items, suggesting that an increase in the assurance pressure for a gun barrel was possible. This study is expected to be used as basic data for future reliability studies of similar equipment.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2004.04a
• /
• pp.269-274
• /
• 2004

The marine electronic system for safe navigation such as ECDIS has been contributing to increase the safety of navigation, decreasing the mariner's load of navigation. The ECDIS should be developed and approved by international standard of IMO for performance standard and IEC for type-approval method and required results. However, these standards have some ambiguities for us not to directly adopt them for real approval system, so we should analyze them for more clear meaning and prepare our own detail standard for type-approval system. The first thing to do for the goal of this research was to analyze the standard in detail and make ambiguity be cleared in our own standards, considering each test item in view of test methodology. For the result of analysis we could develop more evident and detail type-approval standard for each test item with test technology needed. Especially, we developed the colour differentiation test process of ECDIS monitor, which include the colour differentiation formula derived from CIE colour scheme. Several test items require sensor informations of navigation equipment compatible with IEC 61162. We also developed the signal simulator for general messages of IEC 61162 that must be provided. Additionally, the type-approval processes and standards for Back-up arrangement and RCDS mode were developed.

• Resources Recycling
• /
• v.14 no.3
• /
• pp.16-36
• /
• 2005

The quantity of passenger cars in industrial countries has been significantly increased in recent years. According to prognoses, this tendency is likely to continue in the forthcoming future. As a direct consequence, an increase of End-of Life-Vehicles (ELV) will confront us with the problem of "ELV-Recycling". In order to cope with this situation, the European regulation for the treatment of End-of-Life-Vehicles (09/2000) has been transferred to national law in Germany (ELV-Regulation from 1 July 2002). The long term aim is to reduce residues from the ELV-treatment to less than 5 wt% from 30 wt% within the next 10 years (2015). For that reason, there is a need for innovative and more efficient recycling techniques tailored to future materials in automobiles. The design process at automotive industry is continuously changing due to the strong demand on optional equipment and new technical solutions for fuel saving. Light materials, such as aluminum and plastics, consequently become more important and cause a decrease of ferrous metals. Since plastic materials are often used as compounds, a separation into initial material types by means of mechanical recycling methods is not possible. For that reason, efficient recycling can only be realized by introducing recycling-friendly car designs. In the end an integrated approach of auto makers and recycling industry is of decisive significance for the fulfillment of future regulations.

• Journal of Korean Academy of Nursing
• /
• v.4 no.1
• /
• pp.107-120
• /
• 1974

Necessity and purpose of this study: In a large number of countries it has been founded that children′s domestic accidents are at great risk year by year In the United States, they publish detailed accident statistics at regular intervals. In Korea. there have been just a few studies on Accidents-At-Home of preschool children. But it can not be said that there have been any systematic statistics about this area. and any study accounting for the relations of home accidents and preschool: children in detail, Therefore, the purpose of this thesis was focused on the inquire of these relations so as to make a little contribution to Korean preschool children′s health and security measures. So, the detail-purposes are to study following questions and to testify following hypothesis. Prob. 1. What the types of accidents of Preschool children, where the place accidents occurred\ulcorner Prob. 2. What the cause of accidents and, the main factors of the cause\ulcorner Prob. 3. How about the number of their children. the disparity of age among their children and mother′s age in each case of accidents\ulcorner hypothesis 1. There will be differences in the density of protection of parents according to the number of their children. hypothesis 2, There will be differences in accident-types and first-aid methods according to parents socio-economic background. Method; This study employed the interviewing survey method, in which 130 preschool children ware random.sampled, who visit hospital to have medical care. These children (from 1 to 6 years olds) were selected at the emergency room of five hospitals in Seoul (Hosp: Severance, Woosok, Medical Center, Hanyang Medical College Hospital and Seoul Medical Col1age Hospital during study-period (from Aug. to Oct, 1973). Four head nurses in above Hospitals were employed as accident members for this study. Concerning research analysis, the method of hypothesis verifying is used. Conclusion: As two American experts on this subject. Dr, Raymond Neuter and Mr. Ross Mc Garland have drawn attention to "minor epidemics of accidents" that could be avoided by fairly simple measures. preschool children′s accidents could be avoided by parents fair attentions. In other words, one of the most common causes of preschool children′s accidents derived from their parent′s inattention. Therefore, one important task on this subject is to instruct the parents fairly about the children′s accidents. Many accidents could be avoided by the exorcist of a little self-discipline. Also, as much the prevention of accidents is important, as the first-aid Is Important and necessary at the case of the accidents. So, the methods of proper first-aid treatment must be emphasized, and must be taught in school, especially in girls school. And there could be other means available for prevention of accidents. Firstly, the public authorities can take legal measures. More stringent safety standards can be made enforceable by law. Building materials and equipment for domestic us: ought to meat minimum safety criteria at all times. Next the public itself has to understand the seriousness of the problem, and here the dissemination of information is of great importance. All mass media should be brought into play to promote greater public awareness of the question. At last, it will be needed to obtain more detailed epidemiological data through additional surveys and statistics after this study.

• Journal of IKEEE
• /
• v.19 no.3
• /
• pp.415-423
• /
• 2015

The DO-178C guide, which is referenced as the software development guide when a certification of the airworthiness in the commercial airplane is acquired by FAA in US, is recently referenced for the local military aircraft airworthiness. This indicates that when the auditor of the military aircraft airworthiness looks over the software development documents, the auditor reviews if all of the documents are verified in accordance with the DO-178C guide. However, when we developed the military aircraft intercom, We developed its control software in accordance with the CMMI level 3, since there were no requirements for the compliance of the DO-178C guide. Therefore, When we consider the airworthiness of this intercomm system, The analysis for how much the software development based on the CMMI level 3 is different from the DO-178C guide is needed to prepare the essential software documents additionally. Thus, This study analyzes the differences between CMMI level 3 and DO-178C guide and provides that which data on the CMMI level 3 is necessary for the compliance of the aircraft airworthiness comparing with the DO-178C. The analyzed result can be applied at the software development of the other military aircraft avionics equipment based on the CMMI model environment considering the compliance of the military aircraft airworthiness.

• The Journal of the Convergence on Culture Technology
• /
• v.2 no.2
• /
• pp.45-49
• /
• 2016

It may be summarized to four kinds of innovation through global convergence, and the convergence of adjacent areas according to mega-trends in medical services market and actively introduced ICT technologies, public and private partnership. Health care is no longer a local industry, it is becoming Global Convergence. In the case of developed countries, it is increased to income levels, the development of new medical technologies, while the increase in specialized medical services and need of aging population. It increases migration of foreign medical personnel, geographical proximity and choice of the best medical technology, regardless of the cost. The increasing demand for high quality yet relatively low foreign prices of medical services. Hospitals are especially spread of international certification such as the US JCI standards. Hospital exports are being evaluated and opened the way for the export industrialization as ICT convergence hospital that can be exported to the fusion-related technologies more efficiently. Current local hospital has already reached saturation, globalization of Korean hospital is being the time necessary. Thus, unlike a strategy for each country, as well as technology transfer it is also possible, such as total exports provided the building, medical equipment procurement, local medical personnel (doctors and nurses) selection and training, PR and marketing. In the current medical law and need to be revised prospectively maintained for publicity and abroad, there is a need for further legal dragons and actively support a more flexible policy on the application of national law overseas medical services.