• Journal of radiological science and technology
• /
• v.37 no.4
• /
• pp.295-305
• /
• 2014

This study is to provide accurate information as medical imaging equipment to check for the presence of body disease US equipment. We investigated the status of medical US equipment performance in Daegu and criteria US phantom (ATS-539) for US equipment performance measurements. The results in this study, 1. US phantom measurement results: The test passed rate were 88.6% and the failed rate were 11.4%. 2. The difference between the group of mean and the pass/failed groups were statistically significant. Focal zone and 4 mm functional resolution in the two items that are not present the passing standard. 3. The difference was statistically significant number of years and used equipment and pass the failed equipment (4.13 vs 7.25 years). We investigated the performance status of US equipment used in the clinical area in Daegu. The basis for the two items are not present this proposed passing standard. Equipment performance was associated with the number of years of using US equipment. It is necessary to maintain the best performance of the equipment phantom measurements for performance testing of US equipment.

• Journal of Applied Reliability
• /
• v.7 no.3
• /
• pp.111-118
• /
• 2007

In 2000, US Army Test and Evaluation Command (ATEC) released the status of reliability requirement levels and achievements for the military equipment which evaluated through the operational tests from 1985 to 1990 and from 1996 to 2000. The rates of military equipments that do not meet reliability requirements are 59% from 1985 to 1990 and 80% from 1996 to 2000. Thus, the US Army has figured out causes, taken steps and put them into practice, This paper is about the recent reliability problems and the latest tendency about US military equipment to acquirere liability level.

• International conference on construction engineering and project management
• /
• 2011.02a
• /
• pp.582-585
• /
• 2011

During disaster response, prioritization of limited resources is one of the most important bust challenging tasks. At the same time, it is imperative to timely provide the rescuers with the adequate equipment to facilitate lifesaving operations. However, supply of high demand equipment was insufficient during the initial phase of disaster response, challenging lifesaving operations in the case of the 9-11 terrorist attacks. In respond to the Haiti Earthquake, spatial information of the geographic area was not sufficient to support the search and rescue operations in the early phase of disaster response. However, with the help of civilians, information such as road names, infrastructure damage, and victim locations were updated into the spatial data repository. At the same time, resource outside of the disaster affected zone converges into the area to assist the response efforts, which is the effect of convergence that often made resource coordination challenging in large scale disasters. To efficiently collect information and utilize the converging resources, this paper proposes a flexible data repository for information update for equipment utilization in large scale disaster response scenarios.

• Nuclear Engineering and Technology
• /
• v.54 no.4
• /
• pp.1363-1373
• /
• 2022

The recent seismic events that occurred in South Korea have increased the interest in the re-evaluation of the seismic capacity of nuclear power plant (NPP) equipment, which is often conservatively estimated. To date, various approaches-including the Bayesian method proposed by the United States (US) Electric Power Research Institute -have been developed to quantify the seismic capacity of NPP equipment. Among these, the Bayesian approach has advantages in accounting for both prior knowledge and new information to update the probabilistic distribution of seismic capacity. However, data availability and region-specific issues exist in applying this Bayesian approach to Korean NPP equipment. Therefore, this paper proposes to construct an earthquake experience database by combining available earthquake records at Korean NPP sites and the general location of equipment within NPPs. Also, for the better representation of the seismic demand of Korean earthquake datasets, which have distinct seismic characteristics from those of the US at a high-frequency range, a broadband frequency range optimization is suggested. The proposed data construction and seismic demand optimization method for seismic capacity re-evaluation are demonstrated and tested on a 480 V motor control center of a South Korea NPP.

• Journal of the Korea Convergence Society
• /
• v.10 no.11
• /
• pp.85-93
• /
• 2019

Despite its matchless position in the global semiconductor industry, Korea has not distinguished itself in the semiconductor equipment sector. Semiconductor cleaning equipment is one of the semiconductor fabrication equipment, and it is expected to be more important along with the advancement of semiconductor fabrication processes. This study attempts to analyze technology competitiveness of major countries in the sector including Korea, and explore specialty sub-areas of the countries. For this purpose, we collected patents of semiconductor cleaning equipment during the last 10 years from the US patent database, and implemented quantitative patent analysis and co-classification network analysis. The result shows that, the US and Japan have been leading the technological progress in this sector, and Korea's competitiveness has lagged behind not only the leading countries but also its competitors and even latecomers. Therefore, intensive R&D and developing technological capabilities are needed for advancing the country's competitiveness in the sector.

• Journal of the Ergonomics Society of Korea
• /
• v.34 no.5
• /
• pp.501-517
• /
• 2015

Objective: The aim of this study was to investigate the technology trend on developing helmets based on the analysis of Korean, US, European and PCT patents. Background: The usage of the personal protective equipment such as the safety helmet would be essential for preventing injuries and reducing the severity of injuries depending on the type of activity and the exposed environment. Method: Database of WIPSON was used for searching the patents. The objects were the Korean, US, European and PCT patents registered or opened from January 2011 to December 2014. The keyword to investigate was helmet, and International Patent Classification (IPC) was used for investigating the technology trend of the patents. Results: The cases of US patents annually increased, but the cases of European patents decreased. US patents belonged to all sections but Korean and European patents and PCT patents did not. The largest number of IPC, to which four areas' patents belonged, was 'Headwear' and the second largest one was 'Hygiene'. In the subgroup level, the most common largest subgroups were 'Parts, details or accessories of helmets' and 'Masks, shields, or hoods for welders'. Korean patents had the lowest ratio of single_IPC at 11%, but the ratios of single_IPC for US and European patents were 52%, respectively. 'Human necessities', 'Mechanical engineering', 'Physics', and 'Electricity' were used as a single_IPC, but lower levels of 'Performing operations', 'Chemistry', 'Textiles' and 'Fixed constructions' were used as multi_IPC. Most main applicants had patents which belonged to 'Human necessities'. Conclusion: The cases of US patents annually increased unlike others. The common technologies for creating the helmet were Parts of helmets under Headwear and Shields for welders under Hygiene. Many Korean patents tended to be categorized as multi_IPC, different from others. Application: To know the technological characteristic of patents would be helpful to initial stage developers.

• Korea Trade Review
• /
• v.45 no.4
• /
• pp.171-194
• /
• 2020

Although there is a lot of literature on the effectiveness of regional trade agreements(RTAs), it is usually analyzed only using trade-related theories and data. However, this paper has a differentiation in that we examine the linkage between international trade and financial markets through the stock markets reactions when the trade agreements related news arrived. Specifically, using an event study, we look into the Korea-US free trade agreement(KORUS FTA) which is the most commercially significant FTA in almost two decades for both the countries. Korean stock market generally responded more sensitively to FTA news than the US stock market, especially in 'Auto & Parts', 'Electrical Equipment' and 'Chemicals' industries. And the investors' perception toward the effect of KORUS FTA on Korean industries changed from negative to positive as negotiations proceed. Korea has a comparative advantage in the production of labor-intensive goods relative to US, but the economies of scale hypothesis does not hold.

• Proceedings of the Korea Society for Simulation Conference
• /
• 2005.11a
• /
• pp.113-121
• /
• 2005

Virtual Manufacturing is a powerful methodology for developing a new product, new equipment and new production system. It enables us to check the errors in design before production. This paper deals with a case study of virtual manufacturing in an excavator factory. Boom and rotating table of upper body are selected for application. 3D models of parts and fixtures are developed with CATIA and 3D simulation models are developed with IGRIP. These models are used for the design of fixture to verify the motion of the equipment. As a result, the manual welding systems are replaced by automatic systems and many design errors are corrected in the design phase, which enables us to reduce the developing cost and time.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.17 no.32
• /
• pp.209-220
• /
• 1994

In this paper, we study the timing and equipment of replacement. Those affect both available possibility and technological levels of new equipments in the future. These problems are classified according to technological levels and in consequence generated four circumstance. Models are formulated in this research. These are able to make us decision which we replace equipment at the first time. A method is suggested to find the optimal age for replacement at given each circumstance. A solution procedure and numerical example are given.

• Proceedings of the IEEK Conference
• /
• 2007.07a
• /
• pp.455-456
• /
• 2007

Nowaday it is main issues for us to protect from the polluted water which is flowing in streams and rivers simultaneously. This paper proposed a water maintenance control system using pH sensor. Also the work enables water analysis downloading VHDL coding to FPGA through Max+plus II simulation tool for display realization.