• The Journal of the Acoustical Society of Korea
• /
• v.14 no.4
• /
• pp.100-108
• /
• 1995

This study is aimed to show that revised prediction method in road traffic noise after comparing prediction method of National Institute of Environmental Research with that of the Acoustical Society of Japan. For this purpose, prediction equation and caluation procedure of each case was programmized and data predicted by each method were compared with those measured in the 14 fields. The result show that data predicted by 14 fields. The result show that data predicted by the method proposed in this study were closer to the data measured in the fields than those predicted by National Institute of Environmental Research and the Acoustical Society of Japan in the surroundings of urban express way (include highway) and general traffic road where the vehicle speed is higher than 40km/h.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.18 no.3
• /
• pp.299-306
• /
• 2008

The electromagnet in Maglev vehicles controls the voltage in its winding to maintain the air gap, a clearance between the electromagnet and guideway, within an allowable deviation, with strongly interacting with the flexible guideway. Thus, the vibration characteristics of guideway plays important role in dynamics of Maglev vehicles using electromagnet as an active suspension system. The effects of the guideway's vibrational characteristics on dynamics of the Maglev vehicle UTM-01 are analyzed. The coupled equations of motion of the vehicle/guideway with 3 DOFs are derived. Eigenvalues are calculated and frequency response analysis is also performed for a clear understanding of the dynamic characteristics due to guideway vibration characteristics. To verify the results, tests of the urban Mgalev vehicle UTM-02 are carried out. It is recommended that the natural frequency of the guideway be minimized and its damping ratio in the Maglev vehicle with a 5-states feedback control law as a levitation control law.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2006.11a
• /
• pp.361-365
• /
• 2006

In order to predict method of blasting vibration in ground and it's resident located around blasting field in urban area, blasting vibration characteristics were measured the vibration velocity(cm/sec), vibration acceleration($cm/sec^2$), vibration acceleration level(dB) and vibration level(dB(V)). The charged powder were used to 1.25kg and measuring sites were 25 points front 4m to 90m at the ground. The correlation of vibration velocity, vibration acceleration, vibration acceleration level and vibration level by square root scaled distance and cube root scaled distance were investigated. The correlation of PPV(peak particle velocity) velocity by SRSD(square root scaled distance) and CRSD(cube root scaled distance) was 0.85 and 0.86 and the correlation of PVS(peak vector sum) velocity by SRSD and CRSD was 0.82. Also vibration acceleration, vibration acceleration level and vibration level by SRSD and CRSD was 0.61, 0.62 and 0.82, respectively. As results, the vibration velocity and vibration level(dB(V)) was showed good correlation, but the vibration acceleration and vibration acceleration level was not showed good correlation.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.24 no.9
• /
• pp.695-705
• /
• 2014

In this paper, two types of techniques for the prediction of radiated sound pressure due to vibration of a structure are investigated. The prediction performance using wave-number sensing technique is compared to that of conventional prediction method, such as Rayleigh's integral method, for the prediction of far-field radiated sound pressure. For a coupled plate, wave-number components are predicted by the vibration response of plate and the prediction performance of far-field sound is verified. In addition, the applicability of distributed sensors that are not allowable to Rayleigh's integral method is considered and these can replace point sensors. Experimental implementation verified the prediction accuracy of far-field sound radiation by the wave-number sensing technique. Prediction results from the technique are as good as those of Rayleigh's integral method and with distributed sensors, more reduced computation time is expected. To predict the radiated sound by the efficient configuration of structural sensors, composed(synthesized) mode considering sound power contribution is determined and from this size and location of sensors are chosen. Four types of sensor configuration are suggested, simulated and compared.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.16 no.5 s.110
• /
• pp.544-550
• /
• 2006

The interaction between people and sound and the way how people consciously perceive their environment are central approach to soundscape research. In this respect, this paper aims to clarify the relationship between water-sound level and recognition region in urban area. As a passive soundscape facility, fountain is a useful way to give place such as public square, park identity and vitality. In this study, to know the optimistic distance and sound level range from fountain, sound levels due to distance were measured and subject responses were checked by questionnaire. As a result, levels from 63 dB to 67 dB were recommended by subjects and moving forward to fountain less satisfactory than backward. Moving forward 5 m and backward 5 m(total range 10 m): there was a difference in satisfaction ratio by 2,5 out of 10. The results of this study could be used for street furniture location design and P.A. system output level.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2004.11a
• /
• pp.810-813
• /
• 2004

The task of introducing sounds leads to the realization of a comfortable acoustic environment and the design of good soundscape. This paper aims to rate the preference of environmental sounds suitable to the public spaces such as park, garden, bus terminal, urban street. And aims to search for the methodology how to select the introducing sounds by subjective and objective procedures. Seventeen kinds of introducing sounds were rated by nine adjectives in the presence of visual site informations. Also adequate sound levels were calculated by adjusting the volume of introducing sounds in the presence of the background sounds and visual informations. The results of psycho-acoustic experiments are as follows. 1. Proposal of various introducing sounds were evaluated to be possible at the rather calm natural park. 2. The introducing sounds which have opposite visual image or already existing at the place were evaluated not adequate to the sound circumstances of the place. 3. By the sounds with the same meaning, the identity of the street and the improvement of sound circumstance can be obtained.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.30 no.1C
• /
• pp.45-51
• /
• 2010

In urban area, design and construction of civil engineering structures such as subway tunnel, underground space and deep excavation is impeded by unreliable site investigation. Variety of embedded objects, electric noises and traffic vibrations degrades the quality of site investigation, whatever the site-investigation technique would be. In this research, a preliminary research was performed to develop a dedicated site investigation technique for urban geotechnical sites, which can overcome the limitations of urban sites. HiRAS (Hybrid Integration of Surface Waves and Resistivity) technique which is the first outcome of the preliminary research was proposed in this paper. The technique combines surface wave as well as electrical resistivity. CapSASW method for surface-wave technique and PDC-R technique for electrical resistivity survey were incorporated to develop HiRAS technique. CapSASW method is a good method for evaluating material stiffness and PDC-R technique is a reliable method for determination of underground stratification even in a site with electrical noise. For the inversion analysis of HiRAS techniuqe, a site-specific relationship between stress-wave velocity and resistivity was employed. As for outgrowth of this research, the 2-D distribution of Poisson's ratio could be also determined.

• Journal of the Economic Geographical Society of Korea
• /
• v.26 no.3
• /
• pp.223-237
• /
• 2023

The Seoul Onsu Industrial Complex, having been completed over 50 years ago, is an old industrial complex, with deteriorating infrastructure and factory buildings. Despite this, there's a current urban industrial agglomeration centered on the machinery industry in the Seoul Onsu Industrial Complex. This study aims to holistically analyze the physical deterioration of facilities in the aging industrial complex and the characteristics of industrial agglomeration to derive the identity of the Seoul Onsu Industrial Complex. Based on the research findings, the complex is seeing an enhanced urban industrial agglomeration due to the influx of small-scale businesses resulting from concentrated trade networks in the metropolitan area and plot subdivision, permission for noise-producing processes, and the ease of securing highly-skilled technicians. However, this agglomeration coexists with a weakening of the complex's production function, limited innovativeness of resident companies, and non-innovative features resulting from weakened competitiveness in the metropolitan machinery industry. In summary, the identity of the Seoul Onsu Industrial Complex is a 'Non-Innovative Urban Industry Agglomeration', an old industrial complex, witnessing non-innovative agglomeration based on a machinery industry network centered in the metropolitan area.

• Korean Journal of Environment and Ecology
• /
• v.28 no.3
• /
• pp.273-280
• /
• 2014

This study examined whether Dybowski's brown frogs(Rana dybowskii) in noisy highway roadsides had different mating calls from those in natural sites. We selected four study sites: two rice paddy sites in Youngdong Highway roadside and two nearby natural counterparts. Frog calls were recorded between 18:30 and 20:00 on February 24, February 27, and March 14, 2014. Frog calls in the natural sites had fundamental frequency approximately at 700 Hz with two to four apparent harmonics, while frog calls in the highway sites had higher fundamental frequency with up to seven apparent harmonics. Analysis of variance (ANOVA) shows that a roadside site that are directly exposed to highway noise had statistically higher frog calling frequency than other study sites. However, the higher calling frequency was not found in another roadside site that differed in elevation from the highway and was buffered by forests. These results indicate that male frogs in a noisy highway roadside called females with a higher pitch and more apparent harmonics to avoid being masked by highway noise. These results also suggest that there is a threshold noise level that interrupts frog's mating behavior and it is needed to maintain highway roadside noise to this threshold level.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.4 no.3
• /
• pp.595-602
• /
• 2000

This paper is aimed at developing an location tracking system of mobile station based on currently available mobile communication network or mobile Phone and PCS(Personal Communication System). When the location tracking of mobile stations is in services, Emergency-119, all of crime investigation, effective urban traffic management and the safety protection of Alzheimer＇s patients can be available. In order to track the location of the mobile and base station, assumption in this paper is to use the statistic characteristics of LOS when modeling the standard noise in case that radio path is LNOS environment. The standard variation of the standard noise is $\pm150$. First, location is estimated by the positioning algorithms of TOA and TDOA and compared each other. Second, after canceling the standard noise by Kalman filter, location is estimated by the above two positioning algorithms. Finally, the location by the Kalman filter and two positioning algorithms is estimated by smoothing method. As a result, 2 dimensional average location error is imvoved by 51.2m in TOA and 34.8m in TDOA when Kalman filer and two positioning algorithms are used, compared with the two positioning algorithm used. And there is 3 more meter improvement after smoothing than Kalman filer and two positioning algorithms used.