• Journal of Communications and Networks
• /
• v.4 no.4
• /
• pp.282-291
• /
• 2002

3GPP (Third Generation Partnership Project) is defining UMTS (Universal Mobile Telecommunication System) releases which span the transition from GSM/UMTS coexistence to All-IP UMTS networks. The deployment of an UMTS network depends, in the first place, on the intended service offerings and the release an operator chooses to start service with. Other key decisions in-fluencing UMTS deployment relate to the timing of the functional enhancements and capacity increases along the economic life of the network. This paper gives an overview on the architectural and technical options for UMTS deployment. It also outlines the methodology underlying the business plan aimed at estimating the returns from investments in the UMTS infrastructure, thus helping to tune operators’ strategies for UMTS deployment.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.8B
• /
• pp.492-501
• /
• 2007

UMTS-WLAN interworking approach can make the best use of the advantages of both networks by eliminating the stand-alone defects of the two services. For the interworking mechanisms of WLANs and UMTS networks, two major solutions have been proposed, namely loose coupling and tight coupling. The loose coupling approach provides separate data paths for WLAN and UMTS. On the other hand, the tight coupling provides a full integration of the WLAN network and the UMTS core network. The loose coupling has been preferred due to the simplicity and less reconfiguration requirement. However, loose coupling is worse in seamless mobility, QoS provision, and network security. In order to lessen the problems involved in the UMTS-WLAN interworking approaches, we propose a new interworking network architecture and a fast vertical handover scheme by employing Mobility Anchor(MA) for interworking between the two different networks. MA can enable authentication and session initialization before L2 handover of the mobile terminal, so that the seamless and fast vertical handover become possible. Thru analysis and numerical experiments, we proved that the proposed scheme has been validated.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.41 no.4
• /
• pp.25-34
• /
• 2004

UMTS network, evolved from GSM, includes packet core network that consists of SGSNS and GGSNs. Service providers should consider subscriber mobility, location registration, and subscriber distribution when designing packet core networks and network elements. Since one of the major traffic sources for IMT-2000 will be data which has bursty characteristics, new design guidelines for dimensioning of SGSN and GGSN should be proposed under various constraints of system parameters. In this paper, we first evaluate the performance of signaling traffic for packet call subscribers. After that, we also obtain the impact of bursty data traffic on the SGSN and GGSN by simulation, and suggest new dimensioning guidelines for packet core network of UMTS under various environments.

• Journal of Communications and Networks
• /
• v.2 no.1
• /
• pp.46-57
• /
• 2000

Ongoing standardization effort on 3G cellular system in 3GPP (UNTS) is based on GPRS core network and promises a global standard for systems capable of offering ubiquitous access to internet for mobile users. Considered radio access systems(FDD CDMA, TDD CDMA, and EDGE) are optimized for robust mobile use. However, there are alternative relatively high-rate radio interfaces being standardized for WLAN (IEEE802.11 and HIPER-LAN/2) which are capable of delivering significantly higher data rates to static or semi-static terminals with much less overhead. Also WPANs(BLUETOOTH, IEEE802.15), which will be present in virtually every mobile handset in the near future, are offering low cast and considerable access data rate and thus are very attractive for interworking scenarios. The prospect of using these interfaces as alternative RANs inthe modular UMTS architecture is very promising. Additionally, the recent inclusion of M-IP in the UMTS R99 standard opens the way for IP-level interfacing to the core network. This article offers an overview into WLAN-Cellular interworking. A brief overview of GPRS, UMTS cellular architectures and relevant WLAN standards is given. Possible interworking architectures are presented.

• Journal of Communications and Networks
• /
• v.11 no.2
• /
• pp.187-195
• /
• 2009

The application of mathematical analysis to the study of wireless ad hoc networks has met with limited success due to the complexity of mobility, traffic models and the dynamic topology. A scenario based universal mobile telecommunications system (UMTS) time division duplex (TDD) opportunistic cellular system with an ad hoc behaviour that operates over UMTS frequency division duplex (FDD) licensed cellular network is considered. In this paper, we present a new routing metric which overall improves system performance in terms of interference and routing which operate in an ad hoc network in an opportunistic manner. Therefore we develop a simulation tool that addresses the goal of analysis and assessment of UMTS TDD opportunistic radio system with ad hoc behavior in coexistence with a UMTS FDD primary cellular networks.

• Korean Management Science Review
• /
• v.27 no.3
• /
• pp.1-14
• /
• 2010

In this paper we study the access network design problem in Universal Mobile Telecommunication Systems (UMTS) networks. Given the location of radio base stations (node-Bs), their traffic demands, and the candidate facility centers for locating radio network controllers (RNCs), the problem is to determine the configuration of access network, including the number and location of facility centers, the number of RNCs in each facility center, and the links between RNCs and node-Bs, with the objective being to design such a network at the minimum cost. We provide a mathematical formulation of the problem with constraints on RNC and node-B capacities, along with a lower bounding method. We develop a heuristic algorithm with two different initial solution methods designed to strengthen the solution quality. The computational efficacy of their procedures is then demonstrated on a number of test problems.

• Proceedings of the IEEK Conference
• /
• 2006.06a
• /
• pp.187-188
• /
• 2006

In CDMA based mobile communication network, signaling messages are routed through Signaling Transfer Point(STP) which is responsible for MTP layer 3 switching. As WCDMA based UMTS network is considered as next generation technology allowing global roaming services, all nodes in networks have their own identity number called Global Title(GT). Therefore, it is essential to introduce Signaling Gateway(SG) responsible for SCCP layer switching to solve the problem each node has all GT tables including even all overseas nodes. In this paper, we propose the signaling network architecture in UMTS networks using SG and we show that we can reduce CAPEX and OPEX in each node. To show the validity of the proposed method some simulations are given in which the results can be expected by intuitive observation.

• Information and Communications Magazine
• /
• v.14 no.11
• /
• pp.22-28
• /
• 1997

ETSI SMG plays a key role at the development of standards for the UMTS Universal Mobile Telecommunications System, a set of standards aimed at the global market. It will be a real Third Generation Global System for Mobile CommunlcaUons adding new features and Introducing relevant technological InnovaUons while evolving from both GSM and ISDN networks. UMTS Is based on the carefully selected market requirements and belongs to the IMT-2000 family. UMTS standardlsaUon Is a market driven process being developed In a close co-operatlon with the UMTS Forum and GSM MoU.

• Journal of Communications and Networks
• /
• v.6 no.4
• /
• pp.295-306
• /
• 2004

In this paper, a novel air-interface is presented for Fleet-Net1, a self-organizing network for inter-vehicle and vehicle-toroadsidecommunication. The air-interface is based upon the lowchip-rate version of UMTS/TDD. To adapt the cellular UMTS standard to an air-interface for ad hoc networks, changes of the physical layer, medium access control sub-layer and radio resource management are required. An overview of the required modifications is given here. Particularly, a decentralized synchronization mechanism is presented and analyzed by means of simulations. Furthermore, changes for the medium access control are explained in detail, which allow for an efficient operation in partly meshed networks and prioritization. Performance results of the overall system considering throughput and delay are derived by means of analytical evaluations and event-driven simulations. Based on realistic mobility models, it is shown that the presented solution provides a robust communication platform even in vehicular environments. The proposed air-interface is a cost-effective solution not only for inter-vehicle communication, but also for ad hoc networking in general, benefiting from the mass-market of UMTS.

• Journal of the Korea Society for Simulation
• /
• v.13 no.3
• /
• pp.31-41
• /
• 2004

In this paper, we consider the strategy of Universal Mobile Telecommunication System (UMTS) and Wireless Local Area Network (WLAN) internetworking that provide the seamless vertical handover for mobile nodes. We propose Mobility Anchor Points (MAP) based UMTS/WLAN internetworking architecture to support the vertical handover. Also, on integrated UMTS/WLAN networks, we propose a vertical handover scheme that avoids the call blocking caused by the network resource shortage. We provide the numerical analysis to investigate the performance evaluation to the proposed scheme and compare the proposed scheme with the existing scheme.