• 제목/요약/키워드: UMTS

검색결과 170건 처리시간 0.032초

Small Internal Antenna Using Multiband, Wideband, and High-Isolation MIMO Techniques

  • Kim, Sang-Hyeong;Jin, Zhe-Jun;Chae, Yoon-Byung;Yun, Tae-Yeoul
    • ETRI Journal
    • /
    • 제35권1호
    • /
    • pp.51-57
    • /
    • 2013
  • In this paper, a small internal antenna for a mobile handset is presented using multiband, wideband, and high-isolation multiple-input multiple-output techniques. The proposed antenna consists of three planar inverted-F antennas (PIFAs) that operate in the global system for mobile communication (GSM900), the digital communication system (DCS), the personal communication system (PCS), the universal mobile telecommunication system (UMTS), and wireless local area network (WLAN) bands with a physical size of $40mm{\times}10mm{\times}10mm$. A resonator attached to the folded PIFA creates dual resonances, achieving a wide bandwidth of approximately 460 MHz, covering the DCS, PCS, and UMTS bands; a meander shorting line is used to improve impedance matching. Additionally, a modified neutralization link is embedded between diversity antennas to enhance isolation, which results in a 6-dB improvement in the isolation and less than 0.1 in the envelope correlation coefficient evaluated from the far-field radiation patterns. Simulation and measurements demonstrate very similar results for S-parameters and radiation patterns. Peak gains show 3.73 dBi, 3.77 dBi, 3.28 dBi, 2.15 dBi, and 5.86 dBi, and antenna efficiencies show 56.15%, 72.15%, 68.59%, 52.92%, and 82.93% for GSM900, DCS, PCS, UMTS, and WLAN bands, respectively.

An Approach for Designing a UMTS and CDMA2000 Dual Standard Compatible Baseband ASIC

  • Kumar Amit;Bansal Munish;Kumar Ratnam V. Raja
    • 정보통신설비학회논문지
    • /
    • 제3권1호
    • /
    • pp.88-101
    • /
    • 2004
  • The Third Generation (3G) cellular mobile communication systems aim at providing higher data rates, improved quality of service, support for multimedia applications and global roaming. Cdma2000 and Universal Mobile Telecommunication System (UMTS) have emerged as two leading 3G standards in USA and European countries, respectively. Both the standards are capable of delivering high bandwidth data, voice and multimedia services to users of mobile equipment, but are not directly interoperableand are not available across different geographic areas, due to which global roaming is not possible in true sense of using single mobile equipment. However, both UMTS and cdma2000 are based on wideband code division multiple access (WCDMA) as the access method. Due to this, there exist some inherent commonalities between them. In this paper we will try to exploit the commonalities between the two standards in order to design an ASIC, which can provide dual standard capability. This paper discusses the physical layer aspects of the two standards and proposes an approach to design an ASIC which can be mapped to baseband processing part of the physical layer and is capable of delivering for either of the two aforementioned standards.

  • PDF

About the Location of Base Stations for a UMTS System: Analytical Study and Simulations

  • Zola Enrica;Barcelo Francisco
    • Journal of Communications and Networks
    • /
    • 제8권1호
    • /
    • pp.49-58
    • /
    • 2006
  • One of the first decisions that a radio network designer must take is the location of base stations and the distance between them in order to give the best coverage to a region and, possibly, to reduce deployment costs. In this paper, the authors give an insight to this matter by presenting a possible solution to a real problem: Planning the base stations layout for a universal mobile telecommunications system (UMTS) in the city of Barcelona. At the basis of this problem, there is the interdependence between coverage and capacity in a wideband-code division multiple access (W-CDMA) system, which is a new element in the planning of BS layout for mobile communications. This aspect has been first treated with an analytical study of the cell coverage range for a specific environment and service. The achieved results have been checked with the help of snapshot simulations together with a geographical information system (GIS) tool incorporated in the simulator that allows to perform analysis and to visualize results in a useful way. By using the simulator, it is also possible to study a more complex environment, that of a set of base stations providing multiple services to a large number of users.

융합망에서 액세스 네트워크 관리 방안 (A Scheme of Access Network Management in Convergence Networks)

  • 박상준;이종찬;신성윤
    • 한국컴퓨터정보학회논문지
    • /
    • 제17권11호
    • /
    • pp.93-99
    • /
    • 2012
  • B3G 네트워크는 이종의 네트워크 시스템 및 서비스에 대한 연동을 제공하는 차세대 네트워크 기술로 사용자 요구에 맞는 서비스 제공을 목적으로 구성된다. 본 논문에서는 B3G 네트워크에서 액세스 네트워크로 사용될 수 있는 UMTS와 WLAN과 같은 이종 네트워크에 대한 시스템 연동 방안을 기술하며, 각 네트워크에서의 서비스 제공 및 이종 액세스 네트워크를 기반으로 한 서비스 연동 방안을 기술한다. UMTS와 WLAN 시스템은 각 네트워크 특성에 맞는 서비스를 제공하며 B3G 네트워크 구성에 참여하여 상호 보완적인 서비스 제공을 통하여 이동 가입자의 서비스 사용 효과를 증대시킬 수 있다.

UMTS망의 AAL2에서 Timer_CU에 따른 다중화 이득 성능분석 (Performance Analysis of Multiplexing Gain over Timer_CU in AAL2 on UMTS Network)

  • 이현진;김재현
    • 대한전자공학회논문지TC
    • /
    • 제41권8호
    • /
    • pp.35-43
    • /
    • 2004
  • AAL2 전송 방식은 3G WCDMA 망에서 Node-B와 RNC사이에서 음성 및 데이터 트래픽을 전송하는데 사용되고 있다. AAL2의 성능을 분석하기 위하여 이산 마코프 체인 모델을 이용하여 음성 트래픽의 압축밀도와 대역이득을 분석하였으며, 시뮬레이션을 통하여 이 결과를 검증하였다. 또한 집선기에서 AAL2 다중화기의 성능을 세부적으로 분석하였다. 분석에 의하여 Node-B에서의 최적의 Timer_CU를 결정하기 위한 근거를 제안하였으며, 대역이득의 측면에서 집선기에서의 부가적인 AAL2 다중화기의 이점이 매우 작다는 것을 확인하였다. 또한 Node-B와 Iub인터페이스의 집선기에서 AAL2를 사용했을 때 데이터 트래픽의 경우 음성 트래픽에 비하여 그 이점이 매우 작다는 것을 알 수 있었다.

UMTS 망과 WLAN 간의 QoS 연동 구조 및 성능분석 (Architecture and Performance Analysis of QoS Interworking between UMTS and WLAN Networks)

  • 김종성;김정록;김나래;정성호;백승권
    • 한국정보처리학회:학술대회논문집
    • /
    • 한국정보처리학회 2005년도 추계학술발표대회 및 정기총회
    • /
    • pp.1211-1214
    • /
    • 2005
  • 서비스품질(QoS) 보장은 지속적인 망 자원을 필요로 하는 멀티미디어 응용을 지원하는데 있어 필수적인 사항이다. 무선 환경에서도 멀티미디어의 응용들이 많이 수용될 것으로 전망됨에 따라 무선 환경에서의 QoS 지원에 대한 중요성이 증가되고 있으나, QoS 지원방안이 개별적인 망 단위로 연구되는 경우가 많다. 따라서, 이종 망들이 혼재하는 환경에서, End-to-End QoS 를 보장하기 위한 QoS 연동에 대한 연구가 필요하다. 본 논문에서는 IEEE 802.11 WLAN 과 UMTS 간의 QoS 연동을 지원하기 위해 상이한 QoS 클래스 및 파라미터들 간의 맵핑 방안을 제시하고 시뮬레이션을 통해 End-to-End QoS 가 지원됨을 입증한다.

  • PDF

A Receiver-Aided Seamless And Smooth Inter-RAT Handover At Layer-2

  • Liu, Bin;Song, Rongfang;Hu, Haifeng
    • KSII Transactions on Internet and Information Systems (TIIS)
    • /
    • 제9권10호
    • /
    • pp.4015-4033
    • /
    • 2015
  • The future mobile networks consist of hyper-dense heterogeneous and small cell networks of same or different radio access technologies (RAT). Integrating mobile networks of different RATs to provide seamless and smooth mobility service will be the target of future mobile converged network. Generally, handover from high-speed networks to low-speed networks faces many challenges from application perspective, such as abrupt bandwidth variation, packet loss, round trip time variation, connection disruption, and transmission blackout. Existing inter-RAT handover solutions cannot solve all the problems at the same time. Based on the high-layer convergence sublayer design, a new receiver-aided soft inter-RAT handover is proposed. This soft handover scheme takes advantage of multihoming ability of multi-mode mobile station (MS) to smooth handover procedure. In addition, handover procedure is seamless and applicable to frequent handover scenarios. The simulation results conducted in UMTS-WiMAX converged network scenario show that: in case of TCP traffics for handover from WiMAX to UMTS, not only handover latency and packet loss are eliminated completely, but also abrupt bandwidth/wireless RTT variation is smoothed. These delightful features make this soft handover scheme be a reasonable candidate of mobility management for future mobile converged networks.

5중 대역 서비스를 위한 삼각 패치 결합 구조의 모노폴 안테나 (Monopole Antenna with a Triangular Patch Structure for Penta-Band Service)

  • 박진원;조태준;문병인;이홍민
    • 한국전자파학회논문지
    • /
    • 제21권2호
    • /
    • pp.136-142
    • /
    • 2010
  • 본 논문에서는 5중 대역 서비스를 위한 삼각 패치 모노폴 안테나가 제안되어졌다. 제안된 안테나는 광대역 특성을 얻기 위해 모노폴 안테나를 기반으로 한 패치 안테나에 슬릿을 부설하였으며 안테나의 크기를 소형화시켰다. 또한, 휴대폰 안테나의 실장 환경을 고려한 $35\;mm{\times}75\;mm$ 크기의 기판에서 안테나 부분의 크기는 $35\;mm{\times}20\;mm$이고 FR-4(비유전율: 4.4, 기판 두께: 1 mm) 기판 위에 설계되어졌으며, 급전 구조에는 임피던스 $50{\Omega}$의 마이크로스트립 선로를 사용하였다. 측정 결과, 제작된 안테나는 GSM/DCS/USPCS/UMTS/Bluetooth 대역에서 임피던스 대역폭($VSWR{\leq}3$)을 만족하였으며, 공진 주파수는 0.92, 1.97, 2.45 GHz이며, 평균 이득은 각각 -2.18, -0.66, -0.58 dBi이고, 안테나의 방사 효율은 각각 60, 85, 87%이다. 따라서 제작된 안테나는 GSM/DCS/USPCS/UMTS/Bluetooth 등의 대역을 만족시키며 각각의 통신 대역 내에서 좋은 특성을 나타내므로 이동 통신 소형 모바일 기기에 적용될 수 있을 것으로 사료된다.

WCDMA(UMTS)용 다중출력 VC-TCXO (Multi-output VC-TCXO for WCDMA(UMTS))

  • 정찬용;이해영
    • 대한전자공학회:학술대회논문집
    • /
    • 대한전자공학회 2005년도 추계종합학술대회
    • /
    • pp.841-844
    • /
    • 2005
  • Multi-output VC-TCXO (Voltage Controlled-Temperature Compensated Crystal Oscillator) for WCDMA has integrated the additional CMOS inverter, so it can be normal clipped sinewave output and additional CMOS output and it can be satisfied the VC-TCXO Characteristics that WCDMA system required. In this paper, however 26MHz is used for reference frequency, similarly and practically, it is usable from 10MHz to 40MHz, Most important factor to integrate CMOS inverter internally is the isolation between normal output and additional output. For this, it is separated in package design, due to this, when it isn't used additional output, it shows the same electrical performance, when it is used additional output, it has minimum-rized the interference. and then the important characteristics in reference oscillator are met to WCDMA system's requirements, like phase noise and frequency short term stability.

  • PDF

국제 표준 LTE-Advanced에서 논의되고 있는 Heterogeneous Network 관련 Interference Management 기술

  • 양정렬;진미성;김동인
    • 정보와 통신
    • /
    • 제28권8호
    • /
    • pp.10-17
    • /
    • 2011
  • 3GPP($3^{rd}$ Generation Partnership project)는 3세대 이동통신인 UMTS(Universal Mobile Telecommunication System)의 초기 표준화 이후 HSPA(High Speed Packet Access), MBMS(Multimedia Broadcast Multicast Service) 등의 기술 개발로 UMTS시스템을 지속적으로 발전시켜 왔다. 그리고, 최근 새로운 무선 접속 기술을 기반한 LTE(Long Term Evolution)시스템에 대한 표준화를 완료하고 ITU-T(International Telecommnunications Union-Radio)의 IMT-Advanced 요구사항을 만족하는 LTE-Advanced 시스템에 대한 연구를 진행하고 있다. 한편 LTE-Advanced 표준의 목표인 무선 전송속도를 한층 더 높이고, 단위비용(cost per bit)을 더욱 낮추고, 셀 커버리지 및 용량을 확대하기 한 저출력의 피코셀, 펨토셀, 무선중계기들을 이용하여 실내외의 소규모 영역을 서비스하도록 하는 heterogeneous network에 대한 국제 표준이 활발히 논의되고 있다. 그러나 여러 셀이 혼재하는 경우 셀들간의 신호 간섭이 발생하여 사용자의 통신 품질이 크게 저하될 우려가 있다. 본 고에서는 heterogeneous network 와 관련하여 국제 표준 LTE-Advanced에서 논의되고 있는 간섭 제어 기법에 대해 소개한다.